Short: A simple single-chip computer using HC11 Author: glue@df.lth.se (Lars Malmborg) Uploader: glue df lth se (Lars Malmborg) Type: docs/hard Architecture: generic This is a hardware project to build a simple yet usable single-chip computer. The GluemachineHC11 is not at all as complex as the other similar controllers around (MiniBoard, HandyBoard, F1-Board, ...) and is therefor cheaper and easier to build. It is contained on a 85x85 mm PCB. The trade off is most significantly the drivers for step motors. Everything contained is produced by an Amiga 4000 and is therefor excelently viewed on an Amiga. If you are using another platform, you can skip the hyper-text .guide and go for the plain text .doc instead. You should also ignore the .info files which are Amiga-specific. I can be reached at: email: glue@df.lth.se dat93lma@ludat.lth.se or snail: Lars Malmborg Nobelvägen 147C 212 15 MALMÖ SWEDEN I can also be found on www: http://www.ludat.lth.se/~dat93lma