From umueller@amiga.icu.net.ch Wed Dec 21 09:44:40 1994 X-Delivered: at request of umueller on wuarchive.wustl.edu Received: from amiga.icu.net.ch (amiga.icu.net.ch [146.228.204.2]) by wuarchive.wustl.edu (8.6.9/8.6.9) with SMTP id JAA14578 for ; Wed, 21 Dec 1994 09:44:37 -0600 Received: by amiga.icu.net.ch id AA08060 (5.65c8/IDA-1.4.4 for umueller@wuarchive.wustl.edu); Wed, 21 Dec 1994 16:42:36 +0100 Received: by amiga.icu.net.ch; Wed, 21 Dec 1994 16:42 GMT Received: from xs1.xs4all.nl by amiga.icu.net.ch with SMTP id AA02122 (5.65c8/IDA-1.4.4 for ); Sun, 4 Dec 1994 12:36:17 +0100 Received: from aobh.xs4all.nl by xs1.xs4all.nl with UUCP id AA15534 (5.67b/IDA-1.5 for amiga.icu.net.ch!umueller); Sun, 4 Dec 1994 12:36:26 +0100 Received: by aobh.xs4all.nl (V1.17-beta/Amiga) id <0dcd@aobh.xs4all.nl>; Sun, 4 Dec 94 10:40:46 CET Message-Id: <9412040940.0dcd@aobh.xs4all.nl> Date: Sun, 04 Dec 94 10:02:44 GMT+1 Organization: Amiga Online Bs Heemstede, +31-23-282002/470739 Mime-Version: 1.0 Content-Transfer-Encoding: 8bit X-Gatesoftware: XEchoGate 1.3 From: Maarten@aobh.xs4all.nl (Maarten Ter Mors) To: umueller@amiga.icu.net.ch Subject: Re: Aminet CD 4 Sender: umueller@amiga.icu.net.ch Content-Type: text/plain; charset=iso-8859-1 Content-Length: 1815 Status: RO UDM> Could you write a step by step explanation on how to user Aminet UDM> CDROMS on the CD32? I would then mail it to the people who have UDM> reported to me the same problem, and we could post it on csa.cd32 and UDM> Aminet. Step 1. Mount a RAD: recoverable RAM disk in the CD32. My experience is that when you cet HighCyl to about 49, you are able to fit a usable Workbench on it and still use the CD32 to a useful extent. Step 2. Copy the LIBS: and C: dirs straight from the Workbench-equipped CD you booted from. The Commodore Demo CD is ideal, since it contains Workbench 3.1, whereas most others use 3.0. To save space, you could consider deleting some libraries you don't need anyway, like LIBS/rexx#?. Also, you can probably do without C/Edit and a couple of others. Step 3. Create the following directories on RAD: : S, Prefs, Prefs/Env-Archive, Prefs/Env-Archive/sys Step 4. Copy the settings you want from ENVARC:sys/ to RAD:Prefs/Env-Archive/sys/ You can omit this step, but you'll be left with a very boring, standard Workbench, which is probably off-centre on your screen, which looks boring in blue and grey and has a whooping big mouse pointer. Step 5. Make a small startup-sequence in RAD:S/, like : C:SetPatch <>NIL: C:MakeDir <>NIL: RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys C:Copy <>NIL: ENVARC: RAM:ENV ALL NOREQ C:Assign <>NIL: ENV: RAM:ENV C:Assign <>NIL: T: RAM:T C:Assign <>NIL: CLIPS: RAM:Clipboards C:IPrefs C:LoadWB EndCLI <>NIL: Step 6. Remove the bootable CD from the drive and reboot the CD32. It should now boot from RAD: and leave you with a Workbench and about 1,2 MB RAM free. If you insert the AmiNet CD now, it works. G'bye then, /|/| ___ /|/| / / |aarten |er / / |ors email: maarten.ter.mors@aobh.xs4all.nl -- Via Xenolink 1.90