READ THE ENTIRE TEXT !!CAREFULLY!! - I`LL TAKE NO RESPONSIBILTY
FOR ANY DAMAGE TO YOUR SYSTEM.

At 31.12.1998 I`ve bought a IOMEGA JAZ 2GB drive for my Amiga

Iomega JAZ and ZIP drives has some "special" functions that
is only usable with Software that will be delivered with the Drives.

BUT (like the same old song) NO Amiga version is included :-(

But there are the ZJTools from Oliver Hitz. They are providing
the same functions in a small and easy to use Software for the
Amiga.

But it seems that the Development has been stopped.

So I tried to use ZJtools with my new JAZ 2GB drive. And ZJtools
said: Drive not recognized

ZJtools doesn`t know about a JAZ 2GB drive and search for JAZ 1GB
drives.


Let`s the Action beginn:

-----------------------------------------------------------------

Requirements: ZJTOOLS12.lha (found on AMINET in DISK/MISC)
              A HEX editor of your choice

After a look with a HEX editor on ZJTool , I found this String

jaz 1GB


Only that you have to do is: find this string with a HEX editor
(I used fileX - quite Old but very Good)

and CHANGE this line to:

jaz 2GB


The same operation you will have to do with ZJToolMUI and
ZJWatch if you want to use them with your 2GB drive

save the file(s) for test purposes to RAM: or another place of your
choice -

DON`T OVERWRITE THE ORIGINAL FILE(S) TILL YOU`VE TESTED YOUR
PATCHED VERSION(S)


If all went fine ZJTools should work with your IOMEGA JAZ 2GB drive
BUT now ZJTools will no longer work with JAZ 1GB drives - But why use
an old 1GB JAZ drive if you`ve got a new 2GB drive ;-)


THX going out to: Oliver Hitz (oliver.hitz@unifr.ch) for ZJTools
                  Mario Misic (sysop@check.cap.de) for his BBS
                              Checkpoint (++49 223542474)
                  Ralf Staubermann (Vivisected) for the HOURS
                              of Fun ;-)

DISCLAIMER
----------

THIS SOFTWARE IS PROVIDED "AS IS" . NO WARRANTIES ARE MADE EITHER
EXPRESSED OR IMPLIED,WITH RESPECT TO THE RELIABILITY, QUALITY,
PERFORMANCE OR OPERATION OF THIS SOFTWARE. THE USE OF THIS PROGRAMM
IS AT YOUR OWN RISK. THE AUTHOR ASSUMES NO RESPONSIBILITY OR LIABILITY
FOR ANY DAMAGE OR LOSSES RESULTING FROM USING OF THIS SOFTWARE.