# Using rucrdtw

#### Philipp Boersch-Supan

#### 2016-11-06

## Introduction

Dynamic Time Warping (DTW) methods provide algorithms to optimally map a given time series onto all or part of another time series (Berndt and Clifford 1994). The remaining cumulative distance between the series after the alignment is a useful distance metric in time series data mining applications for tasks such as classification, clustering, and anomaly detection.

Calculating a DTW alignment is computationally relatively expensive, and as a consequence DTW is often a bottleneck in time series data mining applications. The UCR Suite (Rakthanmanon et al. 2012) provides a highly optimized algorithm for best-match subsequence searches that avoids unnecessary distance computations and thereby enables fast DTW and Euclidean Distance queries even in data sets containing trillions of observations.

A broad suite of DTW algorithms is implemented in R in the `dtw` package (Giorgino 2009). The `rucrdtw` R package provides complementary functionality for fast similarity searches by providing R bindings for the UCR Suite via `Rcpp` (Eddelbuettel and Francois 2011). In addition to queries and data stored in text files, `rucrdtw` also implements methods for queries and/or data that are held in memory as R objects, as well as a method to do fast similarity searches against reference libraries of time series.

## Installation

Install `rucrdtw` from GitHub:

    install.packages("devtools")
    devtools::install_github("pboesu/rucrdtw")

## Examples

Load `rucrdtw` package:

    library("rucrdtw")

create a random long time series

    set.seed(123)
    rwalk <- cumsum(runif(1e7, min = -0.5, max = 0.5))

Pick a random subsequence of 100 elements as a query

    qstart <- sample(length(rwalk), 1)
    query <- rwalk[qstart:(qstart+100)]

Since both query and data are R vectors, we use the vector-vector methods for the search.

    system.time(dtw_search <- ucrdtw_vv(data = rwalk, query = query, dtwwindow = 0.05))

    ##    user  system elapsed
    ##    1.55    0.00    1.55

    all.equal(qstart, dtw_search$location)

    ## [1] TRUE

    system.time(ed_search <- ucred_vv(data = rwalk, query = query))

    ##    user  system elapsed
    ##    1.55    0.05    1.59

    all.equal(qstart, ed_search$location)

    ## [1] TRUE

And in a matter of seconds we have searched 10 million data points and rediscovered our query!

Searching for an exact match, however, is somewhat artificial. The real power of the similarity search is finding structurally similar subsequences in complex sets of time series. To demonstrate this we load an example data set:

    data("synthetic_control")

This data set contains 600 time series of length 60 from 6 classes (Alcock et al. 1999). The data set documentation contains further information about these data. It can be displayed using the command `?synthetic_control`. We can plot an example of each class

    par(mfrow = c(3,2),
        mar = c(1,1,1,1))
    classes = c("Normal", "Cyclic", "Increasing", "Decreasing", "Upward shift", "Downward shift")
    for (i in 1:6){
      plot(synthetic_control[i*100-99,], type = "l", xaxt = "n", yaxt = "n", ylab="", xlab = "", bty="n", main=classes[i])
    }

Since we are now comparing a query against a set of time series, we only need to do comparisons for non-overlapping data sequences. The matrix-vector methods `ucrdtw_mv` and `ucred_mv` provide this functionality.

We can demonstrate this by removing a query from the data set, and then searching for a closest match:

    index <- 600
    query <- synthetic_control[index,]

    dtw_search <- ucrdtw_mv(synthetic_control[-index,], query, 0.05, byrow = TRUE)
    ed_search <- ucred_mv(synthetic_control[-index,], query, byrow= TRUE)

And plot the results:

    plot(synthetic_control[dtw_search$location,], type="l", ylim=c(0,55), ylab="")
    lines(query, col="red")
    lines(synthetic_control[ed_search$location,], col="blue", lty=3, lwd=3)
    legend("topright", legend = c("query", "DTW match", "ED match"), col=c("red", "black", "blue"), lty=c(1,1,3), bty="n")

## Comparison with a naive DTW sub-sequence search

We can compare the speed-up achieved with the UCR algorithm by comparing it to a naive sliding-window comparison with the `dtw` function from the `dtw` package (Giorgino 2009). We create another time series and load `dtw`.

    set.seed(123)
    rwalk <- cumsum(runif(5e3, min = -0.5, max = 0.5))
    qstart <- 876
    query <- rwalk[qstart:(qstart+99)]
    library(dtw)

`ucrdtw` uses a Sakoe-Chiba Band for the DTW calculation. We therefore create a small function that executes a sliding window search using the same DTW criteria.

    naive_dtw <- function(data, query){
      n_comps <- (length(data)-length(query)+1)
      dtw_dist <- numeric(n_comps)
      for (i in 1:n_comps){
        dtw_dist[i] <- dtw(query, data[i:(i+length(query)-1)], distance.only = TRUE, window.type="sakoechiba", window.size=5)$distance
      }
      which.min(dtw_dist)
    }

Finally, we run the comparison across three time-series ranging from 1000 to 5000 elements, and plot the result. This comparisons requires the `rbenchmark` package.

    if(require(rbenchmark)){
    benchmarks <- rbenchmark::benchmark(
      naive_1000 = naive_dtw(rwalk[1:1000], query),
      naive_2000 = naive_dtw(rwalk[1:2000], query),
      naive_5000 = naive_dtw(rwalk, query),
      ucrdtw_1000 = ucrdtw_vv(rwalk[1:1000], query, 0.05),
      ucrdtw_2000 = ucrdtw_vv(rwalk[1:2000], query, 0.05),
      ucrdtw_5000 = ucrdtw_vv(rwalk, query, 0.05),
      replications = 5)

    #ensure benchmark test column is of type factor for compatibility with r-devel
    benchmarks$test <- as.factor(benchmarks$test)

    colors <- rep(c("#33a02c","#1f78b4"), each=3)

    #plot with log1p transformed axes, as some execution times may be numerically zero
    plot(log1p(benchmarks$elapsed*200) ~ benchmarks$test, cex.axis=0.7, las = 2, yaxt = "n", xlab = "", ylab = "execution time [ms]", ylim = c(0,10), medcol = colors, staplecol=colors, boxcol=colors)
    axis(2, at = log1p(c(1,10,100,1000,10000)), labels = c(1,10,100,1000,10000), cex.axis = 0.7)
    legend("topright", legend = c("naive DTW", "UCR DTW"), fill = c("#33a02c","#1f78b4"), bty="n")
    }

    ## Loading required package: rbenchmark

The speed-up is approximately 3 orders of magnitude.

## References

Alcock, R. J., Y. Manolopoulos, Data Engineering Laboratory, and Department Of Informatics. 1999. “Time-Series Similarity Queries Employing a Feature-Based Approach.” In In 7 Th Hellenic Conference on Informatics, Ioannina, 27–29.

Berndt, Donald J, and James Clifford. 1994. “Using Dynamic Time Warping to Find Patterns in Time Series.” In KDD Workshop, 10:359–70. 16. AAAI. http://www.aaai.org/Library/Workshops/1994/ws94-03-031.php.

Eddelbuettel, Dirk, and Romain Francois. 2011. “Rcpp: Seamless R and C++ Integration.” Journal of Statistical Software 40 (1): 1–18. https://doi.org/10.18637/jss.v040.i08.

Giorgino, Toni. 2009. “Computing and Visualizing Dynamic Time Warping Alignments in R: The Dtw Package.” Journal of Statistical Software 31 (7): 1–24. https://doi.org/10.18637/jss.v031.i07.

Rakthanmanon, Thanawin, Bilson Campana, Abdullah Mueen, Gustavo Batista, Brandon Westover, Qiang Zhu, Jesin Zakaria, and Eamonn Keogh. 2012. “Searching and Mining Trillions of Time Series Subsequences Under Dynamic Time Warping.” In Proceedings of the 18th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining, 262–70. ACM. https://doi.org/10.1145/2339530.2339576.