SAMprior for Continuous Endpoints

Peng Yang and Ying Yuan

2026-04-27

Introduction

The self-adapting mixture prior (SAMprior) package is designed to enhance the effectiveness and practicality of clinical trials by leveraging historical information or real-world data [1]. The package incorporates historical data into a new trial using an informative prior constructed based on historical data while mixing a non-informative prior to enhance the robustness of information borrowing. It utilizes a data-driven way to determine a self-adapting mixture weight that dynamically favors the informative (non-informative) prior component when there is little (substantial) evidence of prior-data conflict. Operating characteristics are evaluated and compared to the robust Meta-Analytic-Predictive (rMAP) prior [2], which assigns a fixed weight of 0.5.

SAM Prior Derivation

SAM prior is constructed by mixing an informative prior \(\pi_1(\theta)\), constructed based on historical data, with a non-informative prior \(\pi_0(\theta)\) using the mixture weight \(w\) determined by SAM_weight function according to the degree of prior-data conflict [1]. The following sections describe how to construct SAM prior in details.

Informative Prior Construction based on Historical Data

We assume three historical data as follows:

study n mean se
1 40 0.136 0.426
2 50 0.172 0.381
3 60 -0.416 0.398

To construct informative priors based on the aforementioned three historical data, we apply gMAP function from RBesT to perform meta-analysis. This informative prior results in a representative form from a large MCMC samples, and it can be converted to a parametric representation with the automixfit function using expectation-maximization (EM) algorithm [3]. This informative prior is also called MAP prior.

sigma = 3
# load R packages
library(ggplot2)
theme_set(theme_bw()) # sets up plotting theme
set.seed(22)
map_mcmc <- gMAP(cbind(mean, se) ~ 1 | study, 
                 weights=n,data=dat,
                 family=gaussian,
                 beta.prior=cbind(0, sigma),
                 tau.dist="HalfNormal",tau.prior=cbind(0,sigma/2))
## Warning: There were 1 divergent transitions after warmup. See
## https://mc-stan.org/misc/warnings.html#divergent-transitions-after-warmup
## to find out why this is a problem and how to eliminate them.
## Warning: Examine the pairs() plot to diagnose sampling problems
## Warning: Bulk Effective Samples Size (ESS) is too low, indicating posterior means and medians may be unreliable.
## Running the chains for more iterations may help. See
## https://mc-stan.org/misc/warnings.html#bulk-ess
## Warning: Tail Effective Samples Size (ESS) is too low, indicating posterior variances and tail quantiles may be unreliable.
## Running the chains for more iterations may help. See
## https://mc-stan.org/misc/warnings.html#tail-ess
## Warning in gMAP(cbind(mean, se) ~ 1 | study, weights = n, data = dat, family = gaussian, : In total 1 divergent transitions occured during the sampling phase.
## Please consider increasing adapt_delta closer to 1 with the following command prior to gMAP:
## options(RBesT.MC.control=list(adapt_delta=0.999))
map_automix <- automixfit(map_mcmc)
map_automix
## EM for Normal Mixture Model
## Log-Likelihood = -514.8595
## 
## Univariate normal mixture
## Reference scale: 2.831279
## Mixture Components:
##   comp1       comp2      
## w  0.72626402  0.27373598
## m -0.02839811 -0.18805095
## s  0.40336249  1.33750294
plot(map_automix)$mix

The resulting MAP prior is approximated by a mixture of conjugate priors.

SAM Weight Determination

Let \(\theta\) and \(\theta_h\) denote the treatment effects associated with the current arm data \(D\) and historical \(D_h\), respectively. Let \(\delta\) denote the clinically significant difference such that is \(|\theta_h - \theta| \ge \delta\), then \(\theta_h\) is regarded as clinically distinct from \(\theta\), and it is therefore inappropriate to borrow any information from \(D_h\). Consider two hypotheses:

\[ H_0: \theta = \theta_h, ~~ H_1: \theta = \theta_h + \delta ~ \text{or} ~ \theta = \theta_h - \delta. \] \(H_0\) represents that \(D_h\) and \(D\) are consistent (i.e., no prior-data conflict) and thus information borrowing is desirable, whereas \(H_1\) represents that the treatment effect of \(D\) differs from \(D_h\) to such a degree that no information should be borrowed.

The SAM prior uses the likelihood ratio test (LRT) statistics \(R\) to quantify the degree of prior-data conflict and determine the extent of information borrowing. \[ R = \frac{P(D | H_0, \theta_h)}{P(D | H_1, \theta_h)} = \frac{P(D | \theta = \theta_h)}{\max \{ P(D | \theta = \theta_h + \delta), P(D | \theta = \theta_h - \delta) \}} , \] where \(P(D | \cdot)\) denotes the likelihood function. An alternative Bayesian choice is the posterior probability ratio (PPR): \[ R = \frac{P(D | H_0, \theta_h)}{P(D | H_1, \theta_h)} = \frac{P(H_0)}{P(H_1)} \times BF , \] where \(P(H_0)\) and \(P(H_1)\) is the prior probabilities of \(H_0\) and \(H_1\) being true. \(BF\) is the Bayes Factor that in this case is the same as LRT.

The SAM prior, denoted as \(\pi_{\text{sam}}(\theta)\), is then defined as a mixture of an informative prior \(\pi_1(\theta)\), constructed based on \(D_h\), with a non-informative prior \(\pi_0(\theta)\): \[\pi_{\text{sam}}(\theta) = w \pi_1(\theta) + (1 - w) \pi_0(\theta)\] where the mixture weight \(w\) is calculated as: \[w = \frac{R}{1 + R}.\] As the level of prior-data conflict increases, the likelihood ratio \(R\) decreases, resulting in a decrease in the weight \(w\) assigned to the informative prior and a decrease in information borrowing. As a result, \(\pi_{\text{sam}}(\theta)\) is data-driven and has the ability to self-adapt the information borrowing based on the degree of prior-data conflict.

To calculate the SAM weight \(w\), we first assume the sample size enrolled in the control arm is \(n = 30\), with \(\theta = 0.4\) and \(\sigma = 3\). Additionally, we assume the effective size is \(d = \frac{\theta - \theta_h}{\sigma} = 0.5\), then we can apply function SAM_weight in SAMprior as follows:

set.seed(234)
sigma        <- 3 ## Standard deviation in the current trial
data.crt     <- rnorm(35, mean = 0.4, sd = sigma)
wSAM_LRT <- SAM_weight(if.prior = map_automix, 
                       delta = 0.5 * sigma,
                       data = data.crt)
                   
cat('SAM weight: ', wSAM_LRT)
## SAM weight:  0.9561358

The default method to calculate \(w\) is using LRT, which is fully data-driven. However, if investigators want to incorporate prior information on prior-data conflict to determine the mixture weight \(w\), this can be achieved by using PPR method as follows:

wSAM_PPR <- SAM_weight(if.prior = map_automix, 
                       delta = 0.5 * sigma,
                       method.w = 'PPR',
                       prior.odds = 3/7,
                       data = data.crt)
                       
cat('SAM weight: ', wSAM_PPR)
## SAM weight:  0.9033055

The prior.odds indicates the prior probability of \(H_0\) over the prior probability of \(H_1\). In this case (e.g., prior.odds = 3/7), the prior information favors the presence prior-data conflict and it results in a decreased mixture weight.

When historical information is congruent with the current control arm, SAM weight reaches to the highest peak. As the level of prior-data conflict increases, SAM weight decreases. This demonstrates that SAM prior is data-driven and self-adapting, favoring the informative (non-informative) prior component when there is little (substantial) evidence of prior-data conflict.

SAM Prior Construction

To construct the SAM prior, we mix the derived informative prior \(\pi_1(\theta)\) with a vague prior \(\pi_0(\theta)\) using pre-determined mixture weight by SAM_prior function in SAMprior as follows:

unit_prior <- mixnorm(nf.prior = c(1, summary(map_automix)['mean'], sigma))
SAM.prior <- SAM_prior(if.prior = map_automix, 
                       nf.prior = unit_prior,
                       weight = wSAM_LRT, sigma = sigma)
SAM.prior
## Univariate normal mixture
## Reference scale: 2.831279
## Mixture Components:
##   comp1       comp2       nf.prior   
## w  0.69440704  0.26172878  0.04386418
## m -0.02839811 -0.18805095 -0.07210083
## s  0.40336249  1.33750294  3.00000000

where the non-informative prior \(\pi_0(\theta)\) follows an unit-information prior.

Operating Characteristics

In this section, we aim to investigate the operating characteristics of the SAM prior, constructed based on the historical data. The incorporation of historical information is expected to be beneficial in reducing the required sample size for the current arms. To achieve this, we assume a 1:2 ratio between the control and treatment arms.

We compare the operating characteristics of the SAM prior and rMAP prior with pre-specified fixed weight under various scenarios. Specifically, we will evaluate the relative bias and relative mean squared error (MSE) of these methods. The relative bias and relative MSE are defined as the differences between the bias/MSE of a given method and the bias/MSE obtained when using a non-informative prior for the estimated effect in the control arm.

Additionally, we investigate the Type I error and power of the methods under different degrees of prior-data conflicts. The decision regarding whether a treatment is superior or inferior to a standard control will be based on the condition: \[\Pr(\theta_t - \theta > 0 \mid D) > C,\] where \(\Delta\) is the clinical margin, and we let \(\Delta = 0\). \(C\) is the posterior probability cutoff. We calibrated the posterior probability cutoff under the null hypothesis, where there is no treatment effect difference between the treatment and control arms and the historical data and current control arm are assumed to arise from the same data-generating process, to ensure the Type I error is maintained at the nominal level.

In SAMprior, the operating characteristics can be considered in following steps:

  1. Specify priors: This step involves constructing informative prior based on historical data and non-informative prior.

  2. Specify design parameters for the get_OC function: This step involves defining the design parameters for evaluating the operating characteristics. These parameters include the clinically significant difference (CSD) used in SAM prior calculation, the method used to determine the mixture weight for the SAM prior, the sample sizes for the control and treatment arms, the choice of weight for the robust MAP prior used as a benchmark.

  3. Scenarios: This step specifies the vectors of response rates for the control and treatment arms. The get_OC function calibrates the posterior probability cutoff under the assumption that the null calibration scenario is given by \(\theta =\) theta[1] and \(\theta_t =\) theta[1] \(+ \Delta\) with \(\Delta = 0\).

Type I Error

To evaluate Type I error, we consider four scenarios. In the first scenario, we assume \(\theta = \theta_t = \theta_h\), so each method should calibrate the Type I error rate to the nominal level. The second and third scenarios represent minimal prior-data conflict, whereas the last scenario represents substantial prior-data conflict. Overall, the results indicate that both SAM and rMAP effectively control the Type I error under minimal prior-data conflict, while SAM demonstrates better Type I error control in the presence of substantial prior-data conflict.

# weak_prior <- mixnorm(c(1, summary(map_automix)[1], 1e4))
TypeI <- get_OC(if.prior = map_automix,         ## MAP prior from historical data
                nf.prior = unit_prior,          ## Unit-informative prior for mixture prior
                prior.t = mixnorm(c(1,0,1000)), ## Vague prior for treatment arm
                delta    = 0.5*sigma,         ## CSD for SAM prior
                ## Method to determine the mixture weight for the SAM prior
                method.w = 'LRT',             
                n        = 35, n.t = 70,      ## Sample size for control and treatment arms
                if.rMAP   = TRUE,             ## Output robust MAP prior for comparison
                weight   = 0.5,               ## Weight for robust MAP prior
                ## Trial settings
                alternative = "greater", ## Direction of the posterior decision. Must be one of "greater" or "less"
                margin = 0,              ## Clinical margin
                ## Treatment effect for control and treatment arms
                theta    = c(summary(map_automix)['mean'], 0,    -0.2, 2),
                theta.t  = c(summary(map_automix)['mean'], -0.1, -0.2, 2))
kable(TypeI)
Scenarios theta theta.t Methods Cutoffs Bias.of.theta RMSE.of.theta Weight Probability.of.Rejection
1 -0.0721 -0.0721 NP 0.9486 0.0000 0.4667 0.0000 0.0500
1 -0.0721 -0.0721 rMAP 0.9209 0.0170 0.2915 0.5000 0.0500
1 -0.0721 -0.0721 SAM 0.9301 0.0212 0.3192 0.8283 0.0500
2 0.0000 -0.1000 NP 0.9486 -0.0018 0.4667 0.0000 0.0347
2 0.0000 -0.1000 rMAP 0.9209 -0.0117 0.2909 0.5000 0.0357
2 0.0000 -0.1000 SAM 0.9301 -0.0051 0.3193 0.8246 0.0354
3 -0.2000 -0.2000 NP 0.9486 0.0032 0.4667 0.0000 0.0494
3 -0.2000 -0.2000 rMAP 0.9209 0.0673 0.3052 0.5000 0.0389
3 -0.2000 -0.2000 SAM 0.9301 0.0668 0.3374 0.8167 0.0443
4 2.0000 2.0000 NP 0.9486 -0.0514 0.4695 0.0000 0.0599
4 2.0000 2.0000 rMAP 0.9209 -0.1282 0.5642 0.5000 0.1193
4 2.0000 2.0000 SAM 0.9301 -0.0564 0.4818 0.0088 0.0829

Power

For power evaluation, we also consider four scenarios. In the first scenario, we assume \(\theta = \theta_t = \theta_h\), so each method should calibrate the Type I error rate to the nominal level. The second and third scenarios represent minimal prior-data conflict, whereas the last scenario represents substantial prior-data conflict. Overall, the results show that the SAM prior achieves performance similar to that of rMAP, and both outperform non-informative prior (NP) when prior-data conflict is minimal. However, when prior-data conflict is substantial, the SAM prior yields better performance than rMAP.

Power <- get_OC(if.prior = map_automix,         ## MAP prior from historical data
                nf.prior = unit_prior,          ## Unit-information prior for mixture prior
                prior.t = mixnorm(c(1,0,1000)), ## Vague prior for treatment arm
                delta    = 0.5 * sigma,       ## CSD for SAM prior
                ## Method to determine the mixture weight for the SAM prior
                method.w = 'LRT',             
                n        = 35, n.t = 70,      ## Sample size for control and treatment arms
                if.rMAP   = TRUE,             ## Output robust MAP prior for comparison
                weight   = 0.5,               ## Weight for robust MAP prior
                ## Trial settings
                alternative = "greater", ## Direction of the posterior decision. Must be one of "greater" or "less"
                margin = 0,              ## Clinical margin
                ## Treatment effect for control and treatment arms
                theta    = c(summary(map_automix)['mean'], 0.1, 0.5,  -2),
                theta.t  = c(summary(map_automix)['mean'], 1.1, 2.0,  -0.5))
kable(Power)
Scenarios theta theta.t Methods Cutoffs Bias.of.theta RMSE.of.theta Weight Probability.of.Rejection
1 -0.0721 -0.0721 NP 0.9486 0.0000 0.4667 0.0000 0.0500
1 -0.0721 -0.0721 rMAP 0.9209 0.0170 0.2915 0.5000 0.0500
1 -0.0721 -0.0721 SAM 0.9301 0.0212 0.3192 0.8283 0.0500
2 0.1000 1.1000 NP 0.9486 -0.0043 0.4667 0.0000 0.5387
2 0.1000 1.1000 rMAP 0.9209 -0.0512 0.2988 0.5000 0.7828
2 0.1000 1.1000 SAM 0.9301 -0.0406 0.3320 0.8074 0.7815
3 0.5000 2.0000 NP 0.9486 -0.0142 0.4669 0.0000 0.8369
3 0.5000 2.0000 rMAP 0.9209 -0.1900 0.4010 0.5000 0.9422
3 0.5000 2.0000 SAM 0.9301 -0.1410 0.4583 0.6193 0.9003
4 -2.0000 -0.5000 NP 0.9486 0.0478 0.4691 0.0000 0.8090
4 -2.0000 -0.5000 rMAP 0.9209 0.1339 0.5705 0.5000 0.7556
4 -2.0000 -0.5000 SAM 0.9301 0.0570 0.4904 0.0169 0.8420

Decision Making

Finally, we present an example showing how to calibrate the posterior probability cutoff and make a final decision on whether the treatment is superior to a standard control after the trial has been completed and the data have been collected.

The calibration step aims to identify the posterior probability cutoff \(C\) such that the Type I error is controlled at a prespecified level. For superiority, this is based on the posterior decision rule \[ \Pr(\theta_t - \theta > \Delta \mid D) > C, \] where \(\Delta\) is the clinical margin, which is often 0.

This calibration can be carried out using the calibrate_cutoff_2arm function, as illustrated below:

## Calibrate the posterior probability cutoff 
PPC <- calibrate_cutoff_2arm(if.prior = map_automix,         ## MAP prior from historical data
                             nf.prior = unit_prior,          ## Unit-information prior for mixture prior
                             prior.t = mixnorm(c(1,0,1000)), ## Vague prior for treatment arm
                             target = 0.05,                 ## Targeted Type I error rate
                             n.t = 70, n = 35,              ## Sample size for treatment and control arms, respectively
                             theta.t = summary(map_automix)['mean'],  ## The true effect for treatment arm
                             theta = summary(map_automix)['mean'],    ## The true effect for control arm
                             sigma.t = sigma, sigma = sigma, ## Standard deviation in the treatment and control arms, respectively
                             ## Method to determine the mixture weight for the SAM prior
                             method = 'SAM',    ## Method 
                             delta = 0.2,       ## CSD for SAM prior
                             ## Trial settings
                             alternative = "greater", ## Direction of the posterior decision. Must be one of "greater" or "less".
                             margin = 0.     ## Clinical margin.
                             )

To make the final decision using the calibrated posterior probability cutoff \(C\), we next update the posterior distributions based on the observed trial data. In this example, the final posterior updating step is carried out using the postmix function from RBesT, while the calibrated cutoff \(C\) is obtained from calibrate_cutoff_2arm in SAMprior. The treatment is then declared superior if the resulting posterior probability exceeds the calibrated cutoff. The posterior updating step is illustrated below:

## Simulate data for treatment arm
data.trt <- rnorm(70, mean = 3, sd = sigma)

## first obtain posterior distributions...
post_SAM <- postmix(priormix = SAM.prior,   ## SAM Prior
                    data = data.crt)
post_trt <- postmix(priormix = unit_prior,  ## Non-informative prior
                    data = data.trt)

## Define the decision function
decision = decision2S(PPC$cutoff, 0, lower.tail=FALSE)

## Decision-making
decision(post_trt, post_SAM)
## [1] 1

References

[1] Yang P. et al., Biometrics, 2023; 00, 1–12. https://doi.org/10.1111/biom.13927
[2] Schmidli H. et al., Biometrics, 2014; 70(4):1023-1032.
[3] Neuenschwander B. et al., Clin Trials, 2010; 7(1):5-18.

R Session Info

sessionInfo()
## R version 4.5.1 (2025-06-13)
## Platform: aarch64-apple-darwin20
## Running under: macOS Sequoia 15.7.5
## 
## Matrix products: default
## BLAS:   /Library/Frameworks/R.framework/Versions/4.5-arm64/Resources/lib/libRblas.0.dylib 
## LAPACK: /Library/Frameworks/R.framework/Versions/4.5-arm64/Resources/lib/libRlapack.dylib;  LAPACK version 3.12.1
## 
## locale:
## [1] C/en_US.UTF-8/en_US.UTF-8/C/en_US.UTF-8/en_US.UTF-8
## 
## time zone: America/Chicago
## tzcode source: internal
## 
## attached base packages:
## [1] stats     graphics  grDevices utils     datasets  methods   base     
## 
## other attached packages:
## [1] ggplot2_4.0.0  knitr_1.50     SAMprior_3.0.0 MatchIt_4.7.2  RBesT_1.8-2   
## 
## loaded via a namespace (and not attached):
##  [1] gtable_0.3.6          tensorA_0.36.2.1      xfun_0.54            
##  [4] bslib_0.9.0           QuickJSR_1.8.1        inline_0.3.21        
##  [7] vctrs_0.6.5           tools_4.5.1           generics_0.1.4       
## [10] stats4_4.5.1          curl_7.0.0            parallel_4.5.1       
## [13] tibble_3.3.0          pkgconfig_2.0.3       checkmate_2.3.3      
## [16] RColorBrewer_1.1-3    S7_0.2.0              distributional_0.5.0 
## [19] RcppParallel_5.1.11-1 assertthat_0.2.1      lifecycle_1.0.4      
## [22] compiler_4.5.1        farver_2.1.2          stringr_1.5.2        
## [25] codetools_0.2-20      htmltools_0.5.8.1     sass_0.4.10          
## [28] bayesplot_1.14.0      yaml_2.3.10           Formula_1.2-5        
## [31] pillar_1.11.1         crayon_1.5.3          jquerylib_0.1.4      
## [34] cachem_1.1.0          StanHeaders_2.32.10   abind_1.4-8          
## [37] posterior_1.6.1       rstan_2.32.7          Metrics_0.1.4        
## [40] tidyselect_1.2.1      digest_0.6.37         mvtnorm_1.3-3        
## [43] stringi_1.8.7         dplyr_1.1.4           reshape2_1.4.4       
## [46] labeling_0.4.3        fastmap_1.2.0         grid_4.5.1           
## [49] colorspace_2.1-2      cli_3.6.5             magrittr_2.0.4       
## [52] loo_2.8.0             dichromat_2.0-0.1     pkgbuild_1.4.8       
## [55] withr_3.0.2           scales_1.4.0          backports_1.5.0      
## [58] rmarkdown_2.30        matrixStats_1.5.0     gridExtra_2.3        
## [61] evaluate_1.0.5        V8_8.0.1              rstantools_2.5.0     
## [64] rlang_1.1.6           Rcpp_1.1.0            glue_1.8.0           
## [67] rstudioapi_0.17.1     jsonlite_2.0.0        R6_2.6.1             
## [70] plyr_1.8.9