Introduction to spatsoc

Alec L. Robitaille, Quinn Webber and Eric Vander Wal

The spatsoc package provides functionality for analyzing animal relocation data in time and space to identify potential interactions among individuals and build gambit-of-the-group data for constructing social networks.

The package contains grouping and edge-list generating functions that are used for identifying spatially and temporally explicit groups from input data. In addition, we provide social network analysis functions for randomizing individual identifiers within groups, designed to test whether social networks generated from animal relocation data were based on non-random social proximity among individuals and for generating group by individual matrices.

The functions were developed for application across animal relocation data, for example, proximity based social network analyses and spatial and temporal clustering of points.

See the other vignettes for further information:

Data preparation

# Load packages
library(spatsoc)
library(data.table)

# Read in spatsoc's example data
DT <- fread(system.file("extdata", "DT.csv", package = "spatsoc"))

# Use subset of individuals
DT <- DT[ID %in% c('H', 'I', 'J')]

# Cast character column 'datetime' as POSIXct
DT[, datetime := as.POSIXct(datetime, tz = 'UTC')]
DT <- DT[ID %chin% c('H', 'I', 'J')]
ID X Y datetime population
H 701724.1 5504325 2016-11-01 00:00:49 1
H 701648.5 5504276 2016-11-01 02:00:33 1
I 711042.0 5506384 2016-11-01 00:00:24 1
I 711229.0 5506446 2016-11-01 02:00:33 1
J 707568.6 5500406 2016-11-01 00:00:56 1
J 707566.5 5500404 2016-11-01 02:00:21 1

spatsoc expects a data.table for all of its functions. If you have a data.frame, you can use data.table::setDT() to convert it by reference. If your data is a CSV, you can use data.table::fread() to import it as a data.table.

The data consist of relocations of 3 individuals over r DT[, max(yday(datetime)) - min(yday(datetime))] days. Using these data, we can compare the various grouping methods available in spatsoc. Note: these examples will use a subset of the data, only individuals H, I and J.

Temporal grouping

The group_times function is used to group relocations temporally. It is flexible to a threshold provided in units of minutes, hours or days. Since GPS fixes taken at regular intervals have some level of variability, we will provide a time threshold (threshold), to consider all fixes within this threshold taken at the same time. Alternatively, we may want to understand different scales of grouping, perhaps daily movement trajectories or seasonal home range overlap.

group_times(DT, datetime = 'datetime', threshold = '5 minutes')
ID X Y datetime minutes timegroup
I 711042.0 5506384 2016-11-01 00:00:24 0 1
H 701724.1 5504325 2016-11-01 00:00:49 0 1
J 707568.6 5500406 2016-11-01 00:00:56 0 1
J 707566.5 5500404 2016-11-01 02:00:21 0 2
H 701648.5 5504276 2016-11-01 02:00:33 0 2
I 711229.0 5506446 2016-11-01 02:00:33 0 2
J 707562.6 5500374 2016-11-01 04:00:41 0 3
I 711124.0 5506407 2016-11-01 04:00:44 0 3
H 701607.2 5504291 2016-11-01 04:00:54 0 3

A message is returned when group_times is run again on the same DT, as the columns already exist in the input DT and will be overwritten.

group_times(DT, datetime = 'datetime', threshold = '2 hours')

## minutes, timegroup columns found in input DT and will be overwritten by this function
ID X Y datetime hours timegroup
I 711042.0 5506384 2016-11-01 00:00:24 0 1
H 701724.1 5504325 2016-11-01 00:00:49 0 1
J 707568.6 5500406 2016-11-01 00:00:56 0 1
J 707566.5 5500404 2016-11-01 02:00:21 2 2
H 701648.5 5504276 2016-11-01 02:00:33 2 2
I 711229.0 5506446 2016-11-01 02:00:33 2 2
J 707562.6 5500374 2016-11-01 04:00:41 4 3
I 711124.0 5506407 2016-11-01 04:00:44 4 3
H 701607.2 5504291 2016-11-01 04:00:54 4 3 
group_times(DT, datetime = 'datetime', threshold = '5 days')

## hours, timegroup columns found in input DT and will be overwritten by this function
ID X Y datetime block timegroup
J 708039.5 5500073 2016-11-03 10:00:33 62 1
H 701959.6 5503512 2016-11-03 22:00:48 62 1
J 707432.1 5500457 2016-11-04 16:00:49 62 1
J 708026.7 5500041 2016-11-08 10:00:47 63 2
I 710114.4 5507005 2016-11-08 14:00:41 63 2
J 706229.0 5499623 2016-11-08 14:00:48 63 2
H 703309.2 5504788 2016-11-12 12:00:49 64 3
I 701225.6 5504733 2016-11-12 22:00:47 64 3
H 701970.1 5503993 2016-11-14 22:00:41 64 3

Spatial grouping

The group_pts function compares the relocations of all individuals in each timegroup and groups individuals based on a distance threshold provided by the user. The group_pts function uses the “chain rule” where three or more individuals that are all within the defined threshold distance of at least one other individual are considered in the same group. For point based spatial grouping with a distance threshold that does not use the chain rule, see edge_dist below.

group_times(DT = DT, datetime = 'datetime', threshold = '15 minutes')
group_pts(DT, threshold = 50, id = 'ID', coords = c('X', 'Y'), timegroup = 'timegroup')

## block, timegroup columns found in input DT and will be overwritten by this function
ID X Y timegroup group
H 699126.1 5508836 771 771
I 699130.0 5508761 771 771
J 699138.0 5508797 771 771
H 699930.5 5508032 772 772
H 700139.2 5507325 773 773
I 700131.7 5507321 773 773
H 700012.2 5508010 774 774
I 700015.0 5508001 774 774
J 700002.3 5508005 774 774

The group_lines function groups individuals whose trajectories intersect in a specified time interval. This represents a coarser grouping method than group_pts which can help understand shared space at daily, weekly or other temporal resolutions.

utm <- 32736

group_times(DT = DT, datetime = 'datetime', threshold = '1 day')
group_lines(DT, threshold = 50, crs = utm, 
            id = 'ID', coords = c('X', 'Y'),
            timegroup = 'timegroup', sortBy = 'datetime')

## minutes, timegroup columns found in input DT and will be overwritten by this function

## group column will be overwritten by this function
ID timegroup group
H 1 1
I 1 121
J 1 204
H 2 2
I 2 122
J 2 205
H 3 3
I 3 123
J 3 206

The group_polys function groups individuals whose home ranges intersect. This represents the coarsest grouping method, to provide a measure of overlap across seasons, years or all available relocations. It can either return the proportion of home range area overlapping between individuals or simple groups. Home ranges are calculated using adehabitatHR::kernelUD or adehabitatHR::mcp. Alternatively, a simple features POLYGON or MULTIPOLYGON object can be provided to the sfPolys argument along with an id column.

utm <- 32736
group_times(DT = DT, datetime = 'datetime', threshold = '8 days')
group_polys(DT = DT, area = TRUE, hrType = 'mcp',
           hrParams = list('percent' = 95),
           crs = utm,
           coords = c('X', 'Y'), id = 'ID')

## timegroup columns found in input DT and will be overwritten by this function

## Registered S3 methods overwritten by 'adehabitatMA':
##   method                       from
##   print.SpatialPixelsDataFrame sp  
##   print.SpatialPixels          sp
ID1 ID2 area proportion
H H 81071930 [m^2] 100.00000 [percent]
I H 57514743 [m^2] 45.73709 [percent]
J H 66161291 [m^2] 49.93401 [percent]
H I 57514743 [m^2] 70.94286 [percent]
I I 125750781 [m^2] 100.00000 [percent]
J I 93471355 [m^2] 70.54578 [percent]
H J 66161291 [m^2] 81.60814 [percent]
I J 93471355 [m^2] 74.33064 [percent]
J J 132497451 [m^2] 100.00000 [percent]

Edge-list generation

The edge_dist function calculates the geographic distance between between individuals within each timegroup and returns all paired relocations within the spatial threshold. edge_dist uses a distance matrix like group_pts, but, in contrast, does not use the chain rule to group relocations.

group_times(DT = DT, datetime = 'datetime', threshold = '15 minutes')
edge_dist(DT, threshold = 50, id = 'ID', 
          coords = c('X', 'Y'), timegroup = 'timegroup', fillNA = TRUE)

## block, timegroup columns found in input DT and will be overwritten by this function
timegroup ID1 ID2
158 H NA
158 I NA
158 J NA
159 H I
159 I H
159 J NA
160 H I
160 I H
160 J NA

The edge_nn function calculates the nearest neighbour to each individual within each time group. If the optional distance threshold is provided, it is used to limit the maximum distance between neighbours. edge_nn returns an edge list of each individual and their nearest neighbour.

group_times(DT = DT, datetime = 'datetime', threshold = '15 minutes')
edge_nn(DT, id = 'ID', coords = c('X', 'Y'), timegroup = 'timegroup')

## minutes, timegroup columns found in input DT and will be overwritten by this function
timegroup ID NN
1 H J
1 I J
1 J I
2 H J
2 I J
2 J I