; This file is generated by the 'xdebug.org:html/docs/convert.php' robot

; -----------------------------------------------------------------------------
; xdebug.cli_color
;
; Type: integer, Default value: 0
;
; If this setting is 1, Xdebug will color var_dumps and stack traces output when
; in CLI mode and when the output is a tty. On Windows, the ANSICON [1] tool
; needs to be installed.
;
; [1] http://adoxa.altervista.org/ansicon/
;
; If the setting is 2, then Xdebug will always color var_dumps and stack trace,
; no matter whether it's connected to a tty or whether ANSICON is installed. In
; this case, you might end up seeing escape codes.
;
; See this article [1] for some more information.
;
; [1] https://derickrethans.nl/cli-color.html
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
zend_extension=xdebug.so
#xdebug.mode=develop,profile

# paths are relative to /var/www if chroot is used
#xdebug.log=/logs/xdebug.log
#xdebug.output_dir=/tmp

; -----------------------------------------------------------------------------
; xdebug.client_discovery_header
;
; Type: string, Default value: "HTTP_X_FORWARDED_FOR,REMOTE_ADDR"
;
; If xdebug.client_discovery_header is configured to be a non-empty string, then
; the value is used as key in the ``$_SERVER`` superglobal array to determine
; which header to use to find the IP address or hostname to use for 'connecting
; back to'. This setting is only used in combination with
; xdebug.discover_client_host and is otherwise ignored.
;
; For example, if xdebug.client_discovery_header is set to
; ``HTTP_FORWARD_HOST``, then Xdebug will check
; ``$_SERVER['HTTP_FORWARD_HOST']`` to obtain the IP address to use for
; 'connecting back'.
;
; It is possible to configure multiple fallbacks by using a comma separated list
; of values. For example if you want to use ``HTTP_FORWARD_HOST`` first, and
; then also want to check ``REMOTE_ADDR``, then you set
; xdebug.client_discovery_header to ``HTTP_FORWARD_HOST,REMOTE_ADDR``.
;
; .. warning::
;
;    PHP automatically prepends ``HTTP_``, and converts ``-`` to ``_``, for
;    received HTTP header names. The ``THIS-IS-MY-HOST`` HTTP header is
;    converted into ``$_SERVER['HTTP_THIS_IS_MY_HOST']``. Therefore, the
;    xdebug.client_discovery_header needs to be set to ``HTTP_THIS_IS_MY_HOST``
;    to match this.
;
; If you have logging enabled, and set the xdebug.log_level setting to ``10``,
; then Xdebug will list every header, the header value, and the used header (if
; any) when attempting to find the IP address to connect back to.
;
; .. note::
;
;    Xdebug 3.2 and later no longer fall back to the
;    ``$_SERVER['HTTP_X_FORWARDED_FOR']`` and ``$_SERVER['REMOTE_ADDR']`` header
;    values by default. If you want these headers to be used as well, you
;    specifically need to add these to the list of headers, by setting
;    xdebug.client_discovery_header to
;    ``YOUR_OWN_HEADER,HTTP_X_FORWARDED_FOR,REMOTE_ADDR``.
;
;
;xdebug.client_discovery_header = "HTTP_X_FORWARDED_FOR,REMOTE_ADDR"

; -----------------------------------------------------------------------------
; xdebug.client_host
;
; Type: string, Default value: localhost
;
; Configures the IP address or hostname where Xdebug will attempt to connect to
; when initiating a debugging connection. This address should be the address of
; the machine where your IDE or debugging client is listening for incoming
; debugging connections.
;
; Xdebug also supports a few other ways of specifying the host to connect to,
; but these methods are not always available. xdebug_info() shows whether the
; ``xdebug://*`` methods are available.
;
; xdebug://gateway
;     Use the system defined network gateway.
;
;     *Supported on Linux only.*
;
; xdebug://nameserver
;     Use the system defined private network nameserver.
;
;     *Supported on Linux only, and not with distributions that use musl libc
;     [1], such as Alpine Linux.*
;
; unix:///path/to/sock
;     A Unix domain socket [2].
;
;     *Supported on non-Windows platforms, and only supported by select few
;     debugging clients.*
;
; If xdebug.discover_client_host is enabled then Xdebug will only use the value
; of this setting in case Xdebug can not connect to an IDE using the information
; it obtained from HTTP headers. In that case, the value of this setting acts as
; a fallback only.
;
; [1] https://en.wikipedia.org/wiki/Musl
; [2] https://en.wikipedia.org/wiki/Unix_domain_socket
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
;
;xdebug.client_host = localhost

; -----------------------------------------------------------------------------
; xdebug.client_port
;
; Type: integer, Default value: 9003
;
; The port to which Xdebug tries to connect on the remote host. Port ``9003`` is
; the default for both Xdebug and the Command Line Debug Client. As many clients
; use this port number, it is best to leave this setting unchanged.
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
;
;xdebug.client_port = 9003

; -----------------------------------------------------------------------------
; xdebug.cloud_id
;
; Type: string, Default value: 
;
; With this setting you configure Xdebug for use with Xdebug Cloud [1]. It needs
; to match one of the tokens from your profile page [2].
;
; [1] https://xdebug.cloud
; [2] https://xdebug.cloud/profile#tokens
;
; Your IDE needs to be configured with the same token for Xdebug and your IDE to
; communicate through Xdebug Cloud.
;
; | In PhpStorm you can find this setting under:
; | File | Settings | PHP | Debug | Xdebug Cloud for Windows and Linux
; | PhpStorm | Preferences | PHP | Debug | Xdebug Cloud for macOS
;
;
;xdebug.cloud_id = 

; -----------------------------------------------------------------------------
; xdebug.collect_assignments
;
; Type: boolean, Default value: false
;
; This setting, defaulting to 0, controls whether Xdebug should add variable
; assignments to function traces. Assign-by-var ( ``=&``) assignments are
; included too.
;
;
;xdebug.collect_assignments = false

; -----------------------------------------------------------------------------
; xdebug.collect_params
;
; Introduced in version 3.3
;
; Type: boolean, Default value: true
;
; If enabled (default), files created with the Function Trace feature will
; include all arguments to functions and methods.
;
; When disabled, the argument to each function and method will not be present in
; the trace files.
;
;
;xdebug.collect_params = true

; -----------------------------------------------------------------------------
; xdebug.collect_return
;
; Type: boolean, Default value: false
;
; This setting, defaulting to 0, controls whether Xdebug should write the return
; value of function calls to the trace files.
;
;
;xdebug.collect_return = false

; -----------------------------------------------------------------------------
; xdebug.connect_timeout_ms
;
; Type: integer, Default value: 200
;
; The amount of time in milliseconds that Xdebug will wait for on an IDE to
; acknowledge an incoming debugging connection. The default value of 200 ms
; should in most cases be enough. In case you often get dropped debugging
; requests, perhaps because you have a high latency network, or a development
; box far away from your IDE, or have a slow firewall, then you can should
; increase this value.
;
; Please note that increasing this value might mean that your requests seem to
; 'hang' in case Xdebug tries to establish a connection, but your IDE is not
; listening.
;
;
;xdebug.connect_timeout_ms = 200

; -----------------------------------------------------------------------------
; xdebug.control_socket
;
; Introduced in version 3.3
;
; Type: string, Default value: "default"
;
; Linux and Windows *only*.
;
; When set to ``"default"`` (the default value) or ``"time"``, then Xdebug will
; poll an anonymous pipe (Linux) or Named Pipe (Windows) every 25 ms for a
; command.
;
; A command can currently be used to:
;
; - request process information (time, memory usage, and entry file)
;
; - initiate a debugging session by (trying to) connect to the IDE
;
; - force a breakpoint
;
; You should use the Xdebug Control tool to interact with this control socket.
;
; When this setting is set to ``"off"``, then Xdebug will not create a control
; socket, and hence you can't send commands to it.
;
; |  If your system (or container) does not have a reliable TSC clock, then "default" does not enable control sockets. You have to change this setting to "time" instead.
; |
; |  This is to prevent slowing down PHP by wasting time to check the current time through a slow clock interface.
; |
; |  If Xdebug detects that the TSC clock is not available, it will print a warning in the log file.
; |
; |  You can find out which clock source Xdebug has detected in xdebug_info() output.
; |
; |
;
; .. note::
;
;    You can programatically check whether control sockets are enabled for your
;    PHP build by calling xdebug_info() with ``extension-flags`` as category. If
;    control sockets are available, then ``control-socket`` is returned in the
;    resulting array. If a TSC clock is available, then ``tsc`` is also present
;    in the resulting array.
;
;
;xdebug.control_socket = "default"

; -----------------------------------------------------------------------------
; xdebug.discover_client_host
;
; Type: boolean, Default value: false
;
; If enabled, Xdebug will first try to connect to the client that made the HTTP
; request. It checks the ``$_SERVER['HTTP_X_FORWARDED_FOR']`` and
; ``$_SERVER['REMOTE_ADDR']`` variables to find out which hostname or IP address
; to use.
;
; If xdebug.client_discovery_header is configured, then the ``$_SERVER``
; variable with that configured name will be checked instead of the default
; variables.
;
; If Xdebug can not connect to a debugging client as found in one of the HTTP
; headers, it will fall back to the hostname or IP address as configured by the
; xdebug.client_host setting.
;
; This setting does not apply for debugging through the CLI, as the ``$_SERVER``
; header variables are not available there.
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
; .. warning::
;
;    Please note that there is no filter available, and anybody who can connect
;    to the webserver will then be able to start a debugging session, even if
;    their address does not match xdebug.client_host.
;
;
;xdebug.discover_client_host = false

; -----------------------------------------------------------------------------
; xdebug.dump.*
;
; Type: string, Default value: Empty
;
; * can be any of COOKIE, FILES, GET, POST, REQUEST, SERVER, SESSION. These
; seven settings control which data from the superglobals is shown when an error
; situation occurs.
;
; Each of those php.ini setting can consist of a comma separated list of
; variables from this superglobal to dump, or ``*`` for all of them. Make sure
; you do not add spaces in this setting.
;
; In order to dump the REMOTE_ADDR and the REQUEST_METHOD when an error occurs,
; and all GET parameters, add these settings:
;
;     xdebug.dump.SERVER = REMOTE_ADDR,REQUEST_METHOD
;     xdebug.dump.GET = *
;
;
;xdebug.dump.* = Empty

; -----------------------------------------------------------------------------
; xdebug.dump_globals
;
; Type: boolean, Default value: true
;
; When this setting is set to ``true``, Xdebug adds the values of the super
; globals as configured through the xdebug.dump.* to on-screen stack traces and
; the error log (if enabled).
;
;
;xdebug.dump_globals = true

; -----------------------------------------------------------------------------
; xdebug.dump_once
;
; Type: boolean, Default value: true
;
; Controls whether the values of the superglobals should be dumped on all error
; situations (set to 0) or only on the first (set to 1).
;
;
;xdebug.dump_once = true

; -----------------------------------------------------------------------------
; xdebug.dump_undefined
;
; Type: boolean, Default value: false
;
; If you want to dump undefined values from the superglobals you should set this
; setting to 1, otherwise leave it set to 0.
;
;
;xdebug.dump_undefined = false

; -----------------------------------------------------------------------------
; xdebug.file_link_format
;
; Type: string, Default value: 
;
; This setting determines the format of the links that are made in the display
; of stack traces where file names are used. This allows IDEs to set up a
; link-protocol that makes it possible to go directly to a line and file by
; clicking on the filenames that Xdebug shows in stack traces. An example format
; might look like:
;
;     myide://%f@%l
;
; The possible format specifiers are:
;
; =========  ===============
; Specifier  Meaning
; =========  ===============
; %f         the filename
; ---------  ---------------
; %l         the line number
; =========  ===============
;
; For various IDEs/OSses there are some instructions listed on how to make this
; work:
;
; --------
; PhpStorm
; --------
;
; In the configuration file, add the following line, including the single
; quotes. This uses PhpStorm's REST API.
;
;     xdebug.file_link_format='javascript: var r = new XMLHttpRequest; r.open("get", "http://localhost:63342/api/file/%f:%l");r.send()'
;
;
; ----------------
; Firefox on Linux
; ----------------
;
; - Open
;
;   about:config
;
; - Add a new boolean setting "network.protocol-handler.expose.xdebug" and set
;   it to "false"
;
; - Add the following into a shell script
;
;   ``~/bin/ff-xdebug.sh``:
;
;     #! /bin/sh
;
;     f=`echo $1 | cut -d @ -f 1 | sed 's/xdebug:\/\///'`
;     l=`echo $1 | cut -d @ -f 2`
;
;   Add to that one of (depending whether you have komodo, gvim or netbeans):
;
;   - komodo $f -l $l
;
;   - gvim --remote-tab +$l $f
;
;   - netbeans "$f:$l"
;
; - Make the script executable with
;
; chmod +x ~/bin/ff-xdebug.sh
;
; - Set the xdebug.file_link_format setting to
;
; xdebug://%f@%l
;
; --------------------
; Windows and Netbeans
; --------------------
;
; - Create the file
;
;   ``netbeans.bat`` and save it in your path ( ``C:\Windows`` will work):
;
;     @echo off
;     setlocal enableextensions enabledelayedexpansion
;     set NETBEANS=%1
;     set FILE=%~2
;     set FILE=!FILE:%%5C=\!
;     %NETBEANS% --nosplash --console suppress --open "%FILE:~19%"
;     nircmd win activate process netbeans.exe
;
;   **Note:** Remove the last line if you don't have ``nircmd``.
;
; - Save the following code as
;
;   ``netbeans_protocol.reg``:
;
;     Windows Registry Editor Version 5.00
;
;     [HKEY_CLASSES_ROOT\netbeans]
;     "URL Protocol"=""
;     @="URL:Netbeans Protocol"
;
;     [HKEY_CLASSES_ROOT\netbeans\DefaultIcon]
;     @="\"C:\\Program Files\\NetBeans 7.1.1\\bin\\netbeans.exe,1\""
;
;     [HKEY_CLASSES_ROOT\netbeans\shell]
;
;     [HKEY_CLASSES_ROOT\netbeans\shell\open]
;
;     [HKEY_CLASSES_ROOT\netbeans\shell\open\command]
;     @="\"C:\\Windows\\netbeans.bat\" \"C:\\Program Files\\NetBeans 7.1.1\\bin\\netbeans.exe\" \"%1\""
;
;   **Note:** Make sure to change the path to Netbeans (twice), as well as the
;   ``netbeans.bat`` batch file if you saved it somewhere else than
;   ``C:\Windows\``.
;
; - Double click on the
;
;   ``netbeans_protocol.reg`` file to import it into the registry.
;
; - Set the xdebug.file_link_format setting to
;
; xdebug.file_link_format =
;     "netbeans://open/?f=%f:%l"
;
;
;xdebug.file_link_format = 

; -----------------------------------------------------------------------------
; xdebug.filename_format
;
; Type: string, Default value: ...%s%n
;
; This setting determines the format with which Xdebug renders filenames in HTML
; stack traces (default: ``...%s%n``) and location information through the
; overloaded xdebug_var_dump() (default: ``%f``).
;
; The possible format specifiers are listed in this table. The example output is
; rendered according to the full path
; ``/var/www/vendor/mail/transport/mta.php``.
;
; =========  ==============================================  ===========================================================
; Specifier  Meaning                                         Example Output
; =========  ==============================================  ===========================================================
; %a         Ancester: Two directory elements and filename   mail/transport/mta.php
; ---------  ----------------------------------------------  -----------------------------------------------------------
; %f         Full path                                       /var/www/vendor/mail/transport/mta.php
; ---------  ----------------------------------------------  -----------------------------------------------------------
; %n         Name: Only the file name                        mta.php
; ---------  ----------------------------------------------  -----------------------------------------------------------
; %p         Parent: One directory element and the filename  transport/mta.php
; ---------  ----------------------------------------------  -----------------------------------------------------------
; %s         Directory separator                             /
;                                                            on Linux, OSX and other Unix-like systems, ``\`` on Windows
; =========  ==============================================  ===========================================================
;
;
;xdebug.filename_format = ...%s%n

; -----------------------------------------------------------------------------
; xdebug.force_display_errors
;
; Type: integer, Default value: 0
;
; If this setting is set to ``1`` then errors will **always** be displayed, no
; matter what the setting of PHP's display_errors [1] is.
;
; [1] https://www.php.net/manual/errorfunc.configuration.php#ini.display-errors
;
;
;xdebug.force_display_errors = 0

; -----------------------------------------------------------------------------
; xdebug.force_error_reporting
;
; Type: integer, Default value: 0
;
; This setting is a bitmask, like error_reporting [1]. This bitmask will be
; logically ORed with the bitmask represented by error_reporting [2] to dermine
; which errors should be displayed. This setting can only be made in php.ini and
; allows you to force certain errors from being shown no matter what an
; application does with ini_set() [3].
;
; [1] https://www.php.net/manual/errorfunc.configuration.php#ini.error-reporting
; [2] https://www.php.net/manual/errorfunc.configuration.php#ini.error-reporting
; [3] https://www.php.net/manual/function.ini-set.php
;
;
;xdebug.force_error_reporting = 0

; -----------------------------------------------------------------------------
; xdebug.gc_stats_output_name
;
; Type: string, Default value: gcstats.%p
;
; This setting determines the name of the file that is used to dump garbage
; collection statistics into. The setting specifies the format with format
; specifiers, very similar to sprintf() and strftime(). There are several format
; specifiers that can be used to format the file name.
;
; See the xdebug.trace_output_name documentation for the supported specifiers.
;
;
;xdebug.gc_stats_output_name = gcstats.%p

; -----------------------------------------------------------------------------
; xdebug.halt_level
;
; Type: integer, Default value: 0
;
; This setting allows you to configure a mask that determines whether, and
; which, notices and/or warnings get converted to errors. You can configure
; notices and warnings that are generated by PHP, and notices and warnings that
; you generate yourself (by means of trigger_error()). For example, to convert
; the warning of strlen() (without arguments) to an error, you would do:
;
;     ini_set('xdebug.halt_level', E_WARNING);
;     strlen();
;     echo "Hi!\n";
;
; Which will then result in the showing of the error message, and the abortion
; of the script. ``echo "Hi!\n";`` will not be executed.
;
; The setting is a bit mask, so to convert all notices and warnings into errors
; for all applications, you can set this in php.ini:
;
;     xdebug.halt_level=E_WARNING|E_NOTICE|E_USER_WARNING|E_USER_NOTICE
;
; The bitmask only supports the four level that are mentioned above.
;
;
;xdebug.halt_level = 0

; -----------------------------------------------------------------------------
; xdebug.idekey
;
; Type: string, Default value: *complex*
;
; Controls which IDE Key Xdebug should pass on to the debugging client or proxy.
; The IDE Key is only important for use with the DBGp Proxy Tool, although some
; IDEs are incorrectly picky as to what its value is.
;
; The default is based on the ``DBGP_IDEKEY`` environment setting. If it is not
; present, the default falls back to an empty string.
;
; If this setting is set to a non-empty string, it selects its value over
; ``DBGP_IDEKEY`` environment variable as default value.
;
; The internal IDE Key also gets updated through debugging session management
; and overrides the value of this setting as is explained in the Step Debugging
; documentation.
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
;
;xdebug.idekey = *complex*

; -----------------------------------------------------------------------------
; xdebug.log
;
; Type: string, Default value: 
;
; Configures Xdebug's log file.
;
; Xdebug will log to this file all file creations issues, Step Debugging
; connection attempts, failures, and debug communication.
;
; Enable this functionality by setting the value to a absolute path. Make sure
; that the system user that PHP runs at (such as ``www-data`` if you are running
; with Apache) can create and write to the file.
;
; The file is opened in append-mode, and will therefore not be overwritten by
; default. There is no concurrency protection available.
;
; The log file will include any attempt that Xdebug makes to connect to an IDE:
;
;     [2693358] Log opened at 2020-09-02 07:19:09.616195
;     [2693358] [Step Debug] INFO: Connecting to configured address/port: localhost:9003.
;     [2693358] [Step Debug] ERR: Could not connect to debugging client. Tried: localhost:9003 (through xdebug.client_host/xdebug.client_port).
;     [2693358] [Profiler] ERR: File '/foo/cachegrind.out.2693358' could not be opened.
;     [2693358] [Profiler] WARN: /foo: No such file or directory
;     [2693358] [Tracing] ERR: File '/foo/trace.1485761369' could not be opened.
;     [2693358] [Tracing] WARN: /foo: No such file or directory
;     [2693358] Log closed at 2020-09-02 07:19:09.617510
;
; It includes the opening time ( ``2020-09-02 07:19:09.616195``), the
; IP/Hostname and port Xdebug is trying to connect to ( ``localhost:9003``), and
; whether it succeeded ( ``Connected to client``). The number in brackets (
; ``[2693358]``) is the Process ID.
;
; It includes:
;
; [2693358]
;     process ID in brackets
;
; 2020-09-02 07:19:09.616195
;     opening time
;
; For Step Debugging:
;
;     INFO: Connecting to configured address/port: localhost:9003.
;     ERR: Could not connect to debugging client. Tried: localhost:9003 (through xdebug.client_host/xdebug.client_port).
;
; For Profiling:
;
;     ERR: File '/foo/cachegrind.out.2693358' could not be opened.
;     WARN: /foo: No such file or directory
;
; For Function Trace and Flame Graphs:
;
;     ERR: File '/foo/trace.1485761369' could not be opened.
;     WARN: /foo: No such file or directory
;
; All warnings and errors are described on the Description of errors page, with
; detailed instructions on how to resolve the problem, if possible. All errors
; are always logged through PHP's internal logging mechanism (configured with
; error_log [1] in ``php.ini``). All warnings and errors also show up in the
; diagnostics log that you can view by calling xdebug_info().
;
; [1] https://www.php.net/manual/en/errorfunc.configuration.php#ini.error-log
;
; ---------------------------
; Step Debugger Communication
; ---------------------------
;
; The debugging log can also log the communication between Xdebug and an IDE.
; This communication is in XML, and starts with the ``<init`` XML element:
;
;     <init
;         xmlns="urn:debugger_protocol_v1" xmlns:xdebug="https://xdebug.org/dbgp/xdebug"
;         fileuri="file:///home/httpd/www.xdebug.org/html/router.php"
;         language="PHP" xdebug:language_version="7.4.11-dev"
;         protocol_version="1.0" appid="2693358" idekey="XDEBUG_ECLIPSE">
;             <engine version="3.0.0-dev"><![CDATA[Xdebug]]></engine>
;             <author><![CDATA[Derick Rethans]]></author>
;             <url><![CDATA[https://xdebug.org]]></url>
;             <copyright><![CDATA[Copyright (c) 2002-2020 by Derick Rethans]]></copyright>
;     </init>
;
; The ``fileuri`` attribute lists the entry point of your application, which can
; be useful to compare to ``breakpoint_set`` commands to see if path mappings
; are set-up correctly.
;
; Beyond the ``<init`` element, you will find the configuration of features [1]:
;
; [1] /docs/dbgp#feature-names
;
;     <- feature_set -i 4 -n extended_properties -v 1
;     -> <response
;            xmlns="urn:debugger_protocol_v1" xmlns:xdebug="https://xdebug.org/dbgp/xdebug"
;            command="feature_set" transaction_id="4" feature="extended_properties" success="1">
;        </response>
;
; And continuation commands [1]:
;
; [1] /docs/dbgp#continuation-commands
;
;     <- step_into -i 9
;     -> <response
;            xmlns="urn:debugger_protocol_v1" xmlns:xdebug="https://xdebug.org/dbgp/xdebug"
;            command="step_into" transaction_id="9"
;            status="break" reason="ok">
;                <xdebug:message filename="file:///home/httpd/www.xdebug.org/html/router.php" lineno="3">
;                </xdebug:message>
;        </response>
;
; You can read about DBGP - A common debugger protocol specification at its
; dedicated documation page.
;
; The xdebug.log_level setting controls how much information is logged.
;
; .. warning::
;
;    Many Linux distributions now use systemd, which implements **private tmp**
;    directories. This means that when PHP is run through a web server or as
;    PHP-FPM, the ``/tmp`` directory is prefixed with something akin to:
;    ``/tmp/systemd-private-ea3cfa882b4e478993e1994033fc5feb-apache.service-FfWZRg``
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
;
;xdebug.log = 

; -----------------------------------------------------------------------------
; xdebug.log_level
;
; Type: integer, Default value: 7
;
; Configures which logging messages should be added to the log file.
;
; The log file is configured with the xdebug.log setting.
;
; The following levels are supported:
;
; =====  =============  ================================
; Level  Name           Example
; =====  =============  ================================
; 0      Criticals      Errors in the configuration
; -----  -------------  --------------------------------
; 1      Errors         Connection errors
; -----  -------------  --------------------------------
; 3      Warnings       Connection warnings
; -----  -------------  --------------------------------
; 5      Communication  Protocol messages
; -----  -------------  --------------------------------
; **7**  Information    Information while connecting
; -----  -------------  --------------------------------
; 10     Debug          Breakpoint resolving information
; =====  =============  ================================
;
; Criticals, errors, and warnings always show up in the diagnostics log that you
; can view by calling xdebug_info().
;
; Criticals and errors are additionally logged through PHP's internal logging
; mechanism (configured with error_log [1] in ``php.ini``).
;
; [1] https://www.php.net/manual/en/errorfunc.configuration.php#ini.error-log
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
;
;xdebug.log_level = 7

; -----------------------------------------------------------------------------
; xdebug.max_nesting_level
;
; Type: integer, Default value: 512
;
; Controls the protection mechanism for infinite recursion protection. The value
; of this setting is the maximum level of nested functions that are allowed
; before the script will be aborted.
;
; When the maximum nesting level is reached, an "Error [1]" exception is thrown.
;
; [1] https://www.php.net/manual/class.error.php
;
; Before Xdebug 3.3, the default value was ``256``.
;
;
;xdebug.max_nesting_level = 512

; -----------------------------------------------------------------------------
; xdebug.max_stack_frames
;
; Type: integer, Default value: -1
;
; Controls how many stack frames are shown in stack traces, both on the command
; line during PHP error stack traces, as well as in the browser for HTML traces.
;
;
;xdebug.max_stack_frames = -1

; -----------------------------------------------------------------------------
; xdebug.mode
;
; Type: string, Default value: develop
;
; This setting controls which Xdebug features are enabled.
;
; .. note::
;
;    This setting can only be set in ``php.ini`` or files like ``99-xdebug.ini``
;    that are read when a PHP process starts (directly, or through php-fpm). You
;    can not set this value in ``.htaccess`` and ``.user.ini`` files, which are
;    read per-request, nor through ``php_admin_value`` as used in Apache VHOSTs
;    and PHP-FPM pools.
;
; The following values are accepted:
;
; off
;     Nothing is enabled. Xdebug does no work besides checking whether
;     functionality is enabled. Use this setting if you want close to 0
;     overhead.
;
; develop
;     Enables Development Helpers including the overloaded var_dump().
;
; coverage
;     Enables Code Coverage Analysis to generate code coverage reports, mainly
;     in combination with
;
;     PHPUnit [1].
;
; debug
;     Enables Step Debugging. This can be used to step through your code while
;     it is running, and analyse values of variables.
;
; gcstats
;     Enables Garbage Collection Statistics to collect statistics about PHP's
;     Garbage Collection Mechanism.
;
; profile
;     Enables Profiling, with which you can analyse performance bottlenecks with
;     tools like
;
;     KCacheGrind [2].
;
; trace
;     Enables the Function Trace and Flame Graphs features.
;
;     The former allows you record every function call, including arguments,
;     variable assignment, and return value that is made during a request to a
;     file.
;
;     The latter can be used to visualise certain performance characteristics.
;
; You can enable multiple modes at the same time by comma separating their
; identifiers as value to xdebug.mode: ``xdebug.mode=develop,trace``.
;
; [1] https://phpunit.readthedocs.io/en/9.0/code-coverage-analysis.html
; [2] /docs/profiler#kcachegrind
;
; --------------------------------
; XDEBUG_MODE environment variable
; --------------------------------
;
; You can also set Xdebug's mode by setting the ``XDEBUG_MODE`` environment
; variable on the command-line; this will take precedence over the xdebug.mode
; setting, but will not change the value of the xdebug.mode setting.
;
; .. warning::
;
;    Some web servers have a configuration option to prevent environment
;    variables from being propagated to PHP and Xdebug. For example, PHP-FPM has
;    a ``clear_env`` [1] configuration setting that is ``on`` by default, which
;    you will need to turn ``off`` if you want to use ``XDEBUG_MODE``. Make sure
;    that your web server does not clean the environment, or specifically allows
;    the ``XDEBUG_MODE`` environment variable to be passed on. [1]
;    https://www.php.net/manual/en/install.fpm.configuration.php#clear-env
;
;
;xdebug.mode = develop

; -----------------------------------------------------------------------------
; xdebug.output_dir
;
; Type: string, Default value: /tmp
;
; The directory where Xdebug will write tracing, profiling, and garbage
; collection statistics to. This directory needs to be writable for the system
; user with which PHP is running.
;
; This setting can be changed in ``php.ini``, ``.htaccess`` (and equivalent
; files), and within a PHP file with ``ini_set()``.
;
; In some cases (when profiling, or when xdebug.start_with_request= ``yes`` with
; tracing), Xdebug creates the file before the script runs. In that case,
; changes made through ``ini_set()`` will not be taken into account.
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
; .. warning::
;
;    Many Linux distributions now use systemd, which implements **private tmp**
;    directories. This means that when PHP is run through a web server or as
;    PHP-FPM, the ``/tmp`` directory is prefixed with something akin to:
;    ``/tmp/systemd-private-ea3cfa882b4e478993e1994033fc5feb-apache.service-FfWZRg``
;
;
;xdebug.output_dir = /tmp

; -----------------------------------------------------------------------------
; xdebug.profiler_append
;
; Type: integer, Default value: 0
;
; When this setting is set to 1, profiler files will not be overwritten when a
; new request would map to the same file (depending on the
; xdebug.profiler_output_name setting. Instead the file will be appended to with
; the new profile.
;
;
;xdebug.profiler_append = 0

; -----------------------------------------------------------------------------
; xdebug.profiler_output_name
;
; Type: string, Default value: cachegrind.out.%p
;
; This setting determines the name of the file that is used to dump traces into.
; The setting specifies the format with format specifiers, very similar to
; sprintf() and strftime(). There are several format specifiers that can be used
; to format the file name.
;
; See the xdebug.trace_output_name documentation for the supported specifiers.
;
; .. note::
;
;    This setting can additionally be configured through the
;    ``XDEBUG_CONFIG``environment variable [1]. [1]
;    /docs/all_settings#XDEBUG_CONFIG
;
;
;xdebug.profiler_output_name = cachegrind.out.%p

; -----------------------------------------------------------------------------
; xdebug.scream
;
; Type: boolean, Default value: false
;
; If this setting is 1, then Xdebug will disable the @ (shut-up) operator so
; that notices, warnings and errors are no longer hidden.
;
;
;xdebug.scream = false

; -----------------------------------------------------------------------------
; xdebug.show_error_trace
;
; Type: integer, Default value: 0
;
; When this setting is set to 1, Xdebug will show a stack trace whenever an
; Error is raised - even if this Error is actually caught.
;
;
;xdebug.show_error_trace = 0

; -----------------------------------------------------------------------------
; xdebug.show_exception_trace
;
; Type: integer, Default value: 0
;
; When this setting is set to 1, Xdebug will show a stack trace whenever an
; Exception or Error is raised - even if this Exception or Error is actually
; caught.
;
; Error 'exceptions' were introduced in PHP 7.
;
;
;xdebug.show_exception_trace = 0

; -----------------------------------------------------------------------------
; xdebug.show_local_vars
;
; Type: integer, Default value: 0
;
; When this setting is set to something != 0 Xdebug's generated stack dumps in
; error situations will also show all variables in the top-most scope. Beware
; that this might generate a lot of information, and is therefore turned off by
; default.
;
;
;xdebug.show_local_vars = 0

; -----------------------------------------------------------------------------
; xdebug.start_upon_error
;
; Type: string, Default value: default
;
; Step Debugging can be activated when a PHP Notice or Warning is emitted, or
; when a Throwable [1] (Exception/Error) is thrown, depending on the value of
; this setting:
;
; [1] https://www.php.net/manual/en/class.throwable.php
;
; yes
;     Initialise a debugging session when a PHP Notice or Warning is emitted, or
;     when a Throwable is thrown.
;
; no
; default
;     Do not start a debugging session upon an error situation.
;
;
;xdebug.start_upon_error = default

; -----------------------------------------------------------------------------
; xdebug.start_with_request
;
; Type: string, Default value: default
;
; Step Debugging, a Function Trace, Flame Graphs, Garbage Collection Statistics,
; or Profiling can be activated at the start of a PHP request. Whether this
; happens depends on the value of this setting:
;
; yes
;     The functionality starts when the PHP request starts, and before any PHP
;     code is run.
;
;     For example xdebug.mode= ``trace`` and xdebug.start_with_request= ``yes``
;     starts a Function Trace for the whole request.
;
; no
;     The functionality does not get activated when the request starts.
;
;     You can still start a Function Trace with xdebug_start_trace(), or Garbage
;     Collection Statistics with xdebug_start_gcstats().
;
;     Step Debugging and Profiling will never activate with this value.
;
; trigger
;     The functionality only gets activated when a specific trigger is present
;     when the request starts.
;
;     The name of the trigger is ``XDEBUG_TRIGGER``, and Xdebug checks for its
;     presence in either ``$_ENV`` (environment variable), ``$_GET`` or
;     ``$_POST`` variable, or ``$_COOKIE`` (HTTP cookie name).
;
;     There is a legacy fallback to a functionality specific trigger name:
;     ``XDEBUG_PROFILE`` (for Profiling), ``XDEBUG_TRACE`` (for a Function Trace
;     or Flame Graphs), and ``XDEBUG_SESSION`` (for Step Debugging).
;
;     There is another legacy trigger for Step Debugging only. If you set the
;     ``XDEBUG_CONFIG`` environment variable to any value, then the step
;     debugger will also get activated.
;
;     Debug session management for Step Debugging is also available through
;     ``XDEBUG_SESSION_START``.
;
;     With xdebug.trigger_value you can control which specific trigger value
;     will activate the trigger. If xdebug.trigger_value is set to an empty
;     string, **any** value will be accepted.
;
;     In this mode it is also possible to activate Step Debugging with
;     xdebug_break().
;
; default
;     The ``default`` value depends on xdebug.mode:
;
;     - **debug**      : ``trigger``
;
;     - **gcstats**      : ``no``
;
;     - **profile**      : ``yes``
;
;     - **trace**      : ``trigger``
;
;
;xdebug.start_with_request = default

; -----------------------------------------------------------------------------
; xdebug.trace_format
;
; Type: integer, Default value: 0
;
; The format of the trace file.
;
; =====  ==============================================================================
; Value  Description
; =====  ==============================================================================
; 0      shows a human readable indented trace file with:
;
;        *time index*, *memory usage*, *memory delta*, *level*, *function name*,
;        *function parameters*, *filename* and *line number*.
; -----  ------------------------------------------------------------------------------
; 1      writes a computer readable format which has two different records. There are
;        different records for entering a stack frame, and leaving a stack frame. The
;        table below lists the fields in each type of record. Fields are tab separated.
; -----  ------------------------------------------------------------------------------
; 2      writes a trace formatted in (simple) HTML.
; -----  ------------------------------------------------------------------------------
; 3      writes a "cost" flame graph. See the documentation on Flame Graphs for more
;        information.
; -----  ------------------------------------------------------------------------------
; 4      writes a "memory usage" flame graph. See the documentation on Flame Graphs for
;        more information.
; =====  ==============================================================================
;
; Fields for the computerized format, depend on the record type.
;
; *Entry Line*
;
; =====  ===================================================================
; Field  Description
; =====  ===================================================================
; 1      level
; -----  -------------------------------------------------------------------
; 2      function #
; -----  -------------------------------------------------------------------
; 3      always
;
;        '0'
; -----  -------------------------------------------------------------------
; 4      time index
; -----  -------------------------------------------------------------------
; 5      memory usage
; -----  -------------------------------------------------------------------
; 6      function name
; -----  -------------------------------------------------------------------
; 7      user-defined (1) or internal function (0)
; -----  -------------------------------------------------------------------
; 8      name of the include or require file
; -----  -------------------------------------------------------------------
; 9      filename
; -----  -------------------------------------------------------------------
; 10     line number
; -----  -------------------------------------------------------------------
; 11     no. of arguments
; -----  -------------------------------------------------------------------
; 12..   arguments (as many as specified in field 11) â€” tab separated
; =====  ===================================================================
;
; *Exit Line*
;
; =====  ============
; Field  Description
; =====  ============
; 1      level
; -----  ------------
; 2      function #
; -----  ------------
; 3      always
;
;        '1'
; -----  ------------
; 4      time index
; -----  ------------
; 5      memory usage
; =====  ============
;
; *Return Line*
;
; =====  ============
; Field  Description
; =====  ============
; 1      level
; -----  ------------
; 2      function #
; -----  ------------
; 3      always
;
;        'R'
; -----  ------------
; 4      empty
; -----  ------------
; 5      empty
; -----  ------------
; 6      return value
; =====  ============
;
; See the introduction for Function Trace for a few examples.
;
;
;xdebug.trace_format = 0

; -----------------------------------------------------------------------------
; xdebug.trace_options
;
; Type: integer, Default value: 0
;
; This settings accepts a bitfield to enable options:
;
; 0x01
;     Trace file data will be appended to an already existing file with the same
;     name, instead of it being overwritten.
;
; 0x02
;     Switches the file format to a tab separated format. The format is
;     described in the xdebug.trace_format setting as "format 1".
;
; 0x04
;     Switches to a file format that shows data as an HTML table
;
; 0x08
;     With this bit set,
;
;     ``.xt`` is not added automatically to the end of trace file names.
;
; 0x10
;     Switches to a file format that provides information for "cost"
;     flamegraphs.
;
; 0x20
;     Switches to a file format that provides information for "memory usage"
;     flamegraphs.
;
; To combine multiple flags, you can use bitwise-OR ( ``|``).
;
; ``xdebug.trace_options=0x02|0x08`` enables both the tab separated format, and
; stops the addition of ``.xt`` to the end of the file name.
;
;
;xdebug.trace_options = 0

; -----------------------------------------------------------------------------
; xdebug.trace_output_name
;
; Type: string, Default value: trace.%c
;
; This setting determines the name of the file that is used to dump traces into.
; The setting specifies the format with format specifiers, very similar to
; sprintf() and strftime(). There are several format specifiers that can be used
; to format the file name. The '.xt' extension is always added automatically.
;
; The possible format specifiers are:
;
; =========  ======================================  =================  ====================================================
; Specifier  Meaning                                 Example Format     Example Filename
; =========  ======================================  =================  ====================================================
; %c         crc32 of the current working directory  trace.%c           trace.1258863198.xt
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %p         pid                                     trace.%p           trace.5174.xt
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %r         random number                           trace.%r           trace.072db0.xt
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %s         script name 2                           cachegrind.out.%s  cachegrind.out._home_httpd_html_test_xdebug_test_php
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %t         timestamp (seconds)                     trace.%t           trace.1179434742.xt
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %u         timestamp (microseconds)                trace.%u           trace.1179434749_642382.xt
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %H         $_SERVER['HTTP_HOST']                   trace.%H           trace.kossu.xt
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %R         $_SERVER['REQUEST_URI']                 trace.%R           trace._test_xdebug_test_php_var=1_var2=2.xt
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %U         $_SERVER['UNIQUE_ID']                   trace.%U           trace.TRX4n38AAAEAAB9gBFkAAAAB.xt
;
;            3
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %S         session_id (from $_COOKIE if set)       trace.%S           trace.c70c1ec2375af58f74b390bbdd2a679d.xt
; ---------  --------------------------------------  -----------------  ----------------------------------------------------
; %%         literal %                               trace.%%           trace.%%.xt
; =========  ======================================  =================  ====================================================
;
; 2 This one is only available for trace file names since Xdebug 2.6.
;
; 3 New in version 2.2. This one is set by Apache's mod_unique_id module [1]
;
; [1] http://httpd.apache.org/docs/current/mod/mod_unique_id.html
;
;
;xdebug.trace_output_name = trace.%c

; -----------------------------------------------------------------------------
; xdebug.trigger_value
;
; Type: string, Default value: ""
;
; This setting can be used when xdebug.start_with_request is set to ``trigger``,
; which is the default for Step Debugging and Function Trace.
;
; In ``trigger`` mode, Xdebug will only start its functionality when the
; ``XDEBUG_TRIGGER`` is set in the environment, or when the ``XDEBUG_TRIGGER``
; GET, POST, or COOKIE variable is set.
;
; The legacy names ``XDEBUG_SESSION`` (for Step Debugging), ``XDEBUG_PROFILE``
; (for Profiling), and ``XDEBUG_TRACE`` (for Function Trace) can also be used
; instead of ``XDEBUG_TRIGGER``.
;
; Normally, Xdebug does not look at which value is actually used. If this
; setting is set to a non-empty string, then Xdebug will only trigger if the
; value matches the value of this setting.
;
; With the following settings:
;
;     xdebug.mode=profile
;     xdebug.start_with_request=trigger
;     xdebug.trigger_value=StartProfileForMe
;
; Xdebug's profiler will only start when either the environment variable
; ``XDEBUG_TRIGGER`` is set to ``StartProfileForMe``, the GET or POST variable
; ``XDEBUG_TRIGGER`` is set to ``StartProfileForMe``, or when the cookie
; ``XDEBUG_TRIGGER`` has the value ``StartProfileForMe``.
;
; From Xdebug 3.1, it is possible to configure multiple values by using a comma
; separated list. In that case, Xdebug will trigger if the supplied value
; matches any of the entries that are configured through this setting:
;
;     xdebug.trigger_value=StartDebuggerForMe,StartDebuggerForYou
;
; See also:
;
; xdebug.start_with_request#trigger
;     For how the triggering mechanism works, and which environment and server
;     variables Xdebug acts on.
;
;
;xdebug.trigger_value = ""

; -----------------------------------------------------------------------------
; xdebug.use_compression
;
; Introduced in version 3.1
;
; Type: boolean, Default value: true
;
; If enabled, the Function Trace and Profiling features will create GZip
; compressed files as output. This reduces diskspace.
;
; If GZip compression is not supported by Xdebug, because it was not compiled
; in, then Xdebug will add a warning to its log and xdebug_info() diagnostics
; section.
;
; It is enabled by default if Xdebug has GZip support, and disable if Xdebug
; does not have GZip support.
;
; The QCacheGrind tool that you can use to visualise profiling information does
; not support reading GZip compressed profile files, whereas KCacheGrind and
; PhpStorm do. If you are a QCacheGrind user, you should set
; xdebug.use_compression to ``false``.
;
;
;xdebug.use_compression = true

; -----------------------------------------------------------------------------
; xdebug.var_display_max_children
;
; Type: integer, Default value: 128
;
; Controls the amount of array children and object's properties are shown when
; variables are displayed with either xdebug_var_dump(), xdebug.show_local_vars
; or when making a Function Trace.
;
; To disable any limitation, use *-1* as value.
;
; This setting does not have any influence on the number of children that is
; send to the client through the Step Debugging feature.
;
;
;xdebug.var_display_max_children = 128

; -----------------------------------------------------------------------------
; xdebug.var_display_max_data
;
; Type: integer, Default value: 512
;
; Controls the maximum string length that is shown when variables are displayed
; with either xdebug_var_dump(), xdebug.show_local_vars or when making a
; Function Trace.
;
; To disable any limitation, use *-1* as value.
;
; This setting does not have any influence on the number of children that is
; send to the client through the Step Debugging feature.
;
;
;xdebug.var_display_max_data = 512

; -----------------------------------------------------------------------------
; xdebug.var_display_max_depth
;
; Type: integer, Default value: 3
;
; Controls how many nested levels of array elements and object properties are
; when variables are displayed with either xdebug_var_dump(),
; xdebug.show_local_vars or when making a Function Trace.
;
; The maximum value you can select is *1023*. You can also use *-1* as value to
; select this maximum number.
;
; This setting does not have any influence on the number of children that is
; send to the client through the Step Debugging feature.
;
; .. warning::
;
;    Setting the value to a high number could potentially result in PHP using up
;    all the available memory, so use with caution.
;
;
;xdebug.var_display_max_depth = 3

