Internet-Draft | Context-Aware Navigation Protocol | July 2022 |
Jeong, et al. | Expires 26 January 2023 | [Page] |
This document proposes a Context-Aware Navigation Protocol (CNP) for IP-based vehicular networks for cooperative navigation among vehicles in road networks. This CNP aims at the enhancement of driving safety through a light-weight driving information sharing method. The CNP protocol uses an IPv6 Neighbor Discovery (ND) option to convey driving information such as a vehicle's position, speed, acceleration/deceleration, and direction, and a driver's driving action (e.g., braking and accelerating).¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 26 January 2023.¶
Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The enhancement of driving safety is one of objectives of cooperative driving in vehicular networks. Dedicated Short-Range Communications (DSRC) is for vehicular communications [DSRC]. IEEE has standardized a family standard suite of Wireless Access in Vehicular Environments (WAVE) [WAVE]. Also, IETF has standardized an IPv6 packet delivery protocol over IEEE 802.11-OCB (Outside the Context of a Basic Service Set) [RFC8691], which is a MAC protocol for vehicles in WAVE.¶
A vehicle equipped with various sensors and a DSRC device can sense its surrounding environment including its neighboring vehicles, and share the sensed data and its mobility information (e.g., position, speed, acceleration/deceleration, and direction) with its neighboring vehicles. This information sharing allows vehicles to assess the collision risk and make their maneuvers to avoid an accident in a prompt way. That is, the capability of sensing, computing, and communication of vehicles enables them to understand the driving environment and situation (i.e., context), and cooperate with each other during their navigation.¶
The driving information sharing enables context-aware navigation where each vehicle can display its neighboring vehicles, pedestrians, and obstacles in its navigation system [CASD]. With this CNP, a driver can make a better decision on driving to avoid an accident, and an autonomous vehicle can control its maneuver to escape from a possible fatality in advance.¶
For this CNP service, this document proposes a light-weight data sharing protocol using a new IPv6 Neighbor Discovery (ND) option for Vehicle Mobility Information, which is called Vehicle Mobility Information (VMI) option. This VMI option can be included by a Neighbor Advertisement (NA) message in Vehicular Neighbor Discovery (VND) [ID-Vehicular-ND].¶
There are two messages for the CNP services with the VMI option such as Cooperation Context Message (CCM) and Emergency Context Message (ECM). The CCM is a message to deliver a vehicle's motion information (e.g., position, speed, acceleration/deceleration, direction) and a driver's driving action (e.g., braking and accelerating) to its neighboring vehicles for cooperative driving. The ECM is a message to notify a vehicle's neighboring vehicles of an emergency situation (e.g., an accident and dangerous situation). The ECM has a higher priority than the CCM such that the ECM needs to be disseminated faster than the CCM in vehicular networks.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].¶
This document uses the terminology described in [ID-IPWAVE-PS].¶
Vehicle Mobility Information (VMI) option is an IPv6 ND option to convey either a CCM or ECM. Figure 1 shows the format of the VMI option.¶
Fields: Type 8-bit identifier of the VMI option type as assigned by the IANA: TBD Length 8-bit unsigned integer. The length of the option (including the Type and Length fields) is in units of 8 octets. The value is 3. Message 8-bit identifier of the VMI message type as CCM (0) and ECM (1). Reserved1 This field is unused. It MUST be initialized to zero by the sender and MUST be ignored by the receiver. Reserved2 This field is unused. It MUST be initialized to zero by the sender and MUST be ignored by the receiver. Mobility Information 128-bit mobility information. It contains a vehicle's motion information (e.g., position, speed, acceleration/deceleration, direction) and a driver's driving action (e.g., braking and accelerating) for CCM. Also, it contains a vehicle's emergency information (e.g., obstacle information and accident information).¶
A CCM in a VMI option can be included in an NA message that a vehicle transmits periodically to announce its existence and routing information to its one-hop neighboring vehicles [ID-Vehicular-ND].¶
An ECM in a VMI option can be included in an NA message that a vehicle transmits to immediately announce an emergency situation to its one-hop neighboring vehicles [ID-Vehicular-ND].¶
To let the vehicles take an immediate action on an emergency situation, the ECM has a higher priority than the CCM. Thus, if a vehicle has an ECM and a CCM to send, it SHOULD transmit the ECM earlier than the CCM.¶
This document shares all the security issues of the IPv6 ND protocol. This document can get benefits from Secure Neighbor Discovery (SEND) [RFC3971] in order to protect exchanged messages from possible security attacks.¶
This work was supported in part by Institute of Information & Communications Technology Planning & Evaluation (IITP) grant funded by the Korea Ministry of Science and ICT (MSIT) (2020-0-00395-003, Standard Development of Blockchain based Network Management Automation Technology).¶
This work was supported in part by the MSIT under the ITRC (Information Technology Research Center) support program (IITP-2022-2017-0-01633) supervised by the IITP.¶
This document is made by the group effort of IPWAVE working group. Many people actively contributed to this document, such as Carlos J. Bernardos and Russ Housley. The authors sincerely appreciate their contributions.¶
The following are co-authors of this document:¶
Zhong Xiang - Department of Electrical and Computer Engineering, Sungkyunkwan University, 2066 Seobu-ro Jangan-gu, Suwon, Gyeonggi-do 16419, Republic of Korea. EMail: xz618@skku.edu¶
The following changes are made from draft-jeong-ipwave-context-aware-navigator-05:¶