ALTO K. Gao Internet-Draft Sichuan University Intended status: Experimental Y. Lee Expires: 21 September 2022 Samsung S. Randriamasy Nokia Bell Labs Y.R. Yang Yale University J. Zhang Tongji University 20 March 2022 An ALTO Extension: Path Vector draft-ietf-alto-path-vector-25 Abstract This document is an extension to the base Application-Layer Traffic Optimization (ALTO) protocol. It extends the ALTO Cost Map and ALTO Property Map services so that an application can decide which endpoint(s) to connect based on not only numerical/ordinal cost values but also fine-grained abstract information of the paths. This is useful for applications whose performance is impacted by specified components of a network on the end-to-end paths, e.g., they may infer that several paths share common links and prevent traffic bottlenecks by avoiding such paths. This extension introduces a new abstraction called Abstract Network Element (ANE) to represent these components and encodes a network path as a vector of ANEs. Thus, it provides a more complete but still abstract graph representation of the underlying network(s) for informed traffic optimization among endpoints. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." Gao, et al. Expires 21 September 2022 [Page 1] Internet-Draft ALTO-PV March 2022 This Internet-Draft will expire on 21 September 2022. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Requirements Languages . . . . . . . . . . . . . . . . . . . 6 3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 6 4. Requirements and Use Cases . . . . . . . . . . . . . . . . . 7 4.1. Design Requirements . . . . . . . . . . . . . . . . . . . 7 4.2. Sample Use Cases . . . . . . . . . . . . . . . . . . . . 10 4.2.1. Exposing Network Bottlenecks . . . . . . . . . . . . 11 4.2.2. Resource Exposure for CDN and Service Edge . . . . . 15 5. Path Vector Extension: Overview . . . . . . . . . . . . . . . 17 5.1. Abstract Network Element (ANE) . . . . . . . . . . . . . 18 5.1.1. ANE Entity Domain . . . . . . . . . . . . . . . . . . 19 5.1.2. Ephemeral and Persistent ANEs . . . . . . . . . . . . 19 5.1.3. Property Filtering . . . . . . . . . . . . . . . . . 20 5.2. Path Vector Cost Type . . . . . . . . . . . . . . . . . . 20 5.3. Multipart Path Vector Response . . . . . . . . . . . . . 21 5.3.1. Identifying the Media Type of the Root Object . . . . 22 5.3.2. References to Part Messages . . . . . . . . . . . . . 22 6. Specification: Basic Data Types . . . . . . . . . . . . . . . 23 6.1. ANE Name . . . . . . . . . . . . . . . . . . . . . . . . 23 6.2. ANE Entity Domain . . . . . . . . . . . . . . . . . . . . 23 6.2.1. Entity Domain Type . . . . . . . . . . . . . . . . . 23 6.2.2. Domain-Specific Entity Identifier . . . . . . . . . . 23 6.2.3. Hierarchy and Inheritance . . . . . . . . . . . . . . 23 6.2.4. Media Type of Defining Resource . . . . . . . . . . . 23 6.3. ANE Property Name . . . . . . . . . . . . . . . . . . . . 24 6.4. Initial ANE Property Types . . . . . . . . . . . . . . . 24 6.4.1. Maximum Reservable Bandwidth . . . . . . . . . . . . 24 6.4.2. Persistent Entity ID . . . . . . . . . . . . . . . . 25 6.4.3. Examples . . . . . . . . . . . . . . . . . . . . . . 25 6.5. Path Vector Cost Type . . . . . . . . . . . . . . . . . . 26 Gao, et al. Expires 21 September 2022 [Page 2] Internet-Draft ALTO-PV March 2022 6.5.1. Cost Metric: ane-path . . . . . . . . . . . . . . . . 26 6.5.2. Cost Mode: array . . . . . . . . . . . . . . . . . . 27 6.6. Part Resource ID and Part Content ID . . . . . . . . . . 27 7. Specification: Service Extensions . . . . . . . . . . . . . . 27 7.1. Notations . . . . . . . . . . . . . . . . . . . . . . . . 27 7.2. Multipart Filtered Cost Map for Path Vector . . . . . . . 28 7.2.1. Media Type . . . . . . . . . . . . . . . . . . . . . 28 7.2.2. HTTP Method . . . . . . . . . . . . . . . . . . . . . 28 7.2.3. Accept Input Parameters . . . . . . . . . . . . . . . 28 7.2.4. Capabilities . . . . . . . . . . . . . . . . . . . . 29 7.2.5. Uses . . . . . . . . . . . . . . . . . . . . . . . . 30 7.2.6. Response . . . . . . . . . . . . . . . . . . . . . . 30 7.3. Multipart Endpoint Cost Service for Path Vector . . . . . 34 7.3.1. Media Type . . . . . . . . . . . . . . . . . . . . . 34 7.3.2. HTTP Method . . . . . . . . . . . . . . . . . . . . . 34 7.3.3. Accept Input Parameters . . . . . . . . . . . . . . . 34 7.3.4. Capabilities . . . . . . . . . . . . . . . . . . . . 35 7.3.5. Uses . . . . . . . . . . . . . . . . . . . . . . . . 35 7.3.6. Response . . . . . . . . . . . . . . . . . . . . . . 35 8. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 39 8.1. Sample Setup . . . . . . . . . . . . . . . . . . . . . . 39 8.2. Information Resource Directory . . . . . . . . . . . . . 39 8.3. Multipart Filtered Cost Map . . . . . . . . . . . . . . . 42 8.4. Multipart Endpoint Cost Service Resource . . . . . . . . 43 8.5. Incremental Updates . . . . . . . . . . . . . . . . . . . 48 8.6. Multi-cost . . . . . . . . . . . . . . . . . . . . . . . 50 9. Compatibility with Other ALTO Extensions . . . . . . . . . . 52 9.1. Compatibility with Legacy ALTO Clients/Servers . . . . . 53 9.2. Compatibility with Multi-Cost Extension . . . . . . . . . 53 9.3. Compatibility with Incremental Update . . . . . . . . . . 53 9.4. Compatibility with Cost Calendar . . . . . . . . . . . . 53 10. General Discussions . . . . . . . . . . . . . . . . . . . . . 54 10.1. Constraint Tests for General Cost Types . . . . . . . . 54 10.2. General Multi-Resource Query . . . . . . . . . . . . . . 54 11. Security Considerations . . . . . . . . . . . . . . . . . . . 55 12. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 57 12.1. ALTO Cost Metric Registry . . . . . . . . . . . . . . . 57 12.2. ALTO Cost Mode Registry . . . . . . . . . . . . . . . . 58 12.3. ALTO Entity Domain Type Registry . . . . . . . . . . . . 58 12.4. ALTO Entity Property Type Registry . . . . . . . . . . . 59 12.4.1. New ANE Property Type: Maximum Reservable Bandwidth . . . . . . . . . . . . . . . . . . . . . . 59 12.4.2. New ANE Property Type: Persistent Entity ID . . . . 60 13. References . . . . . . . . . . . . . . . . . . . . . . . . . 60 13.1. Normative References . . . . . . . . . . . . . . . . . . 60 13.2. Informative References . . . . . . . . . . . . . . . . . 61 Appendix A. Acknowledgments . . . . . . . . . . . . . . . . . . 64 Appendix B. Revision Logs (To be removed before publication) . . 64 Gao, et al. Expires 21 September 2022 [Page 3] Internet-Draft ALTO-PV March 2022 B.1. Changes since -20 . . . . . . . . . . . . . . . . . . . . 64 B.2. Changes since -19 . . . . . . . . . . . . . . . . . . . . 65 B.3. Changes since -18 . . . . . . . . . . . . . . . . . . . . 65 B.4. Changes since -17 . . . . . . . . . . . . . . . . . . . . 65 B.5. Changes since -16 . . . . . . . . . . . . . . . . . . . . 65 B.6. Changes since -15 . . . . . . . . . . . . . . . . . . . . 65 B.7. Changes since -14 . . . . . . . . . . . . . . . . . . . . 65 B.8. Changes since -13 . . . . . . . . . . . . . . . . . . . . 66 B.9. Changes since -12 . . . . . . . . . . . . . . . . . . . . 66 B.10. Changes since -11 . . . . . . . . . . . . . . . . . . . . 66 B.11. Changes since -10 . . . . . . . . . . . . . . . . . . . . 66 B.12. Changes since -09 . . . . . . . . . . . . . . . . . . . . 67 B.13. Changes since -08 . . . . . . . . . . . . . . . . . . . . 67 B.14. Changes Since Version -06 . . . . . . . . . . . . . . . . 67 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 68 1. Introduction Network performance metrics are crucial to assess the Quality of Experience (QoE) of applications. The ALTO protocol allows Internet Service Providers (ISPs) to provide guidance, such as topological distance between different end hosts, to overlay applications. Thus, the overlay applications can potentially improve the perceived QoE by better orchestrating their traffic to utilize the resources in the underlying network infrastructure. Existing ALTO Cost Map (Section 11.2.3 of [RFC7285]) and Endpoint Cost Service (Section 11.5 of [RFC7285]) provide only cost information on an end-to-end path defined by its endpoints: The base protocol [RFC7285] allows the services to expose the topological distances of end-to-end paths, while various extensions have been proposed to extend the capability of these services, e.g., to express other performance metrics [I-D.ietf-alto-performance-metrics], to query multiple costs simultaneously [RFC8189], and to obtain the time-varying values [RFC8896]. While the existing extensions are sufficient for many overlay applications, the QoE of some overlay applications depends not only on the cost information of end-to-end paths, but also on particular components of a network on the paths and their properties. For example, job completion time, which is an important QoE metric for a large-scale data analytics application, is impacted by shared bottleneck links inside the carrier network as link capacity may impact the rate of data input/output to the job. We refer to such components of a network as Abstract Network Elements (ANE). Gao, et al. Expires 21 September 2022 [Page 4] Internet-Draft ALTO-PV March 2022 Predicting such information can be very complex without the help of ISPs, for example, [BOXOPT] has shown that finding the optimal bandwidth reservation for multiple flows can be NP-hard without further information than whether a reservation succeeds. With proper guidance from the ISP, an overlay application may be able to schedule its traffic for better QoE. In the meantime, it may be helpful as well for ISPs if applications could avoid using bottlenecks or challenging the network with poorly scheduled traffic. Despite the claimed benefits, ISPs are not likely to expose raw details on their network paths: first for the sake of topology hiding requirement, second because it may increase volume and computation overhead, and last because applications do not necessarily need all the network path details and are likely not able to understand them. Therefore, it is beneficial for both ISPs and applications if an ALTO server provides ALTO clients with an "abstract network state" that provides the necessary information to applications, while hiding the network complexity and confidential information. An "abstract network state" is a selected set of abstract representations of Abstract Network Elements traversed by the paths between pairs combined with properties of these Abstract Network Elements that are relevant to the overlay applications' QoE. Both an application via its ALTO client and the ISP via the ALTO server can achieve better confidentiality and resource utilization by appropriately abstracting relevant Abstract Network Elements. Server scalability can also be improved by combining Abstract Network Elements and their properties in a single response. This document extends [RFC7285] to allow an ALTO server to convey "abstract network state", for paths defined by their pairs. To this end, it introduces a new cost type called "Path Vector" following the cost metric registration specified in [RFC7285] and the updated cost mode registration specified in [I-D.bw-alto-cost-mode]. A Path Vector is an array of identifiers that identifies an Abstract Network Element, which can be associated with various properties. The associations between ANEs and their properties are encoded in an ALTO information resource called Unified Property Map, which is specified in [I-D.ietf-alto-unified-props-new]. For better confidentiality, this document aims to minimize information exposure of an ALTO server when providing Path Vector service. In particular, this document enables and recommends that first ANEs are constructed on demand, and second an ANE is only associated with properties that are requested by an ALTO client. A Path Vector response involves two ALTO Maps: the Cost Map that contains the Path Vector results and the up-to-date Unified Property Gao, et al. Expires 21 September 2022 [Page 5] Internet-Draft ALTO-PV March 2022 Map that contains the properties requested for these ANEs. To enforce consistency and improve server scalability, this document uses the "multipart/related" content type defined in [RFC2387] to return the two maps in a single response. As a single ISP may not have the knowledge of the full Internet paths between arbitrary endpoints, this document is mainly applicable 1) when there is a single ISP between the requested source and destination PIDs or endpoints, for example, ISP-hosted CDN/edge, tenant interconnection in a single public cloud platform, etc.; or 2) when the Path Vectors are generated from end-to-end measurement data. 2. Requirements Languages The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. When the words appear in lower case, they are to be interpreted with their natural language meanings. 3. Terminology This document extends the ALTO base protocol [RFC7285] and the Unified Property Map extension [I-D.ietf-alto-unified-props-new]. In addition to the terms defined in these documents, this document also uses the following additional terms: Abstract Network Element (ANE): An abstract representation for a component in a network that handles data packets and whose properties can potentially have an impact on the end-to-end performance of traffic. An ANE can be a physical device such as a router, a link or an interface, or an aggregation of devices such as a subnetwork or a data center. The definition of Abstract Network Element is similar to Network Element defined in [RFC2216] in the sense that they both provide an abstract representation of specific components of a network. However, they have different criteria on how these particular components are selected. Specifically, a Network Element requires the components to be capable of exercising QoS control, while Abstract Network Element only requires the components to have an impact on the end-to-end performance. ANE Name: A string that uniquely identifies an ANE in a specific Gao, et al. Expires 21 September 2022 [Page 6] Internet-Draft ALTO-PV March 2022 scope. An ANE can be constructed either statically in advance or on demand based on the requested information. Thus, different ANEs may only be valid within a particular scope, either ephemeral or persistent. Within each scope, an ANE is uniquely identified by an ANE Name, as defined in Section 6.1. Note that an ALTO client must not assume ANEs in different scopes but with the same ANE Name refer to the same component(s) of the network. Path Vector: Path Vector, or ANE Path Vector, refers to a JSON array of ANE Names. It is a generalization of BGP path vector. While standard BGP path vector (Section 5.1.2 of [RFC4271]) specifies a sequence of autonomous systems for a destination IP prefix, the Path Vector defined in this extension specifies a sequence of ANEs either for a source Provider-Defined Identifier (PID) and a destination PID as in the CostMapData (11.2.3.6 in [RFC7285]), or for a source endpoint and a destination endpoint as in the EndpointCostMapData object (Section 11.5.1.6 of [RFC7285]). Path Vector resource: An ALTO information resource (Section 8.1 of [RFC7285]) which supports the extension defined in this document. Path Vector cost type: A special cost type, which is specified in Section 6.5. When this cost type is present in an IRD entry, it indicates that the information resource is a Path Vector resource. When this cost type is present in a Filtered Cost Map request or an Endpoint Cost Service request, it indicates each cost value must be interpreted as a Path Vector. Path Vector request: The POST message sent to an ALTO Path Vector resource. Path Vector response: A Path Vector response refers to the multipart/related message returned by a Path Vector resource. 4. Requirements and Use Cases 4.1. Design Requirements This section gives an illustrative example of how an overlay application can benefit from the extension defined in this document. Assume that an application has control over a set of flows, which may go through shared links/nodes and share bottlenecks. The application seeks to schedule the traffic among multiple flows to get better performance. The constraints of feasible rate allocations of those flows will benefit the scheduling. However, Cost Maps as defined in [RFC7285] can not reveal such information. Gao, et al. Expires 21 September 2022 [Page 7] Internet-Draft ALTO-PV March 2022 Specifically, consider a network as shown in Figure 1. The network has 7 switches (sw1 to sw7) forming a dumb-bell topology. Switches "sw1", "sw2", "sw3" and "sw4" are access switches, and sw5-sw7 form the backbone. End hosts eh1 to eh4 are connected to access switches sw1 to sw4 respectively. Assume that the bandwidth of link eh1 -> sw1 and link sw1 -> sw5 is 150 Mbps, and the bandwidth of the other links is 100 Mbps. +-----+ | | --+ sw6 +-- / | | \ PID1 +-----+ / +-----+ \ +-----+ PID2 eh1__| |_ / \ ____| |__eh2 192.0.2.2 | sw1 | \ +--|--+ +--|--+ / | sw2 | 192.0.2.3 +-----+ \ | | | |/ +-----+ \_| sw5 +---------+ sw7 | PID3 +-----+ / | | | |\ +-----+ PID4 eh3__| |__/ +-----+ +-----+ \____| |__eh4 192.0.2.4 | sw3 | | sw4 | 192.0.2.5 +-----+ +-----+ bw(eh1--sw1) = bw(sw1--sw5) = 150 Mbps bw(eh2--sw2) = bw(eh3--sw3) = bw(eh4--sw4) = 100 Mbps bw(sw1--sw5) = bw(sw3--sw5) = bw(sw2--sw7) = bw(sw4--sw7) = 100 Mbps bw(sw5--sw6) = bw(sw5--sw7) = bw(sw6--sw7) = 100 Mbps Figure 1: Raw Network Topology The base ALTO topology abstraction of the network is shown in Figure 2. Assume the cost map returns an hypothetical cost type representing the available bandwidth between a source and a destination. +----------------------+ {eh1} | | {eh2} PID1 | | PID2 +------+ +------+ | | | | {eh3} | | {eh4} PID3 | | PID4 +------+ +------+ | | +----------------------+ Figure 2: Base Topology Abstraction Gao, et al. Expires 21 September 2022 [Page 8] Internet-Draft ALTO-PV March 2022 Now assume the application wants to maximize the total rate of the traffic among a set of pairs, say "eh1 -> eh2" and "eh1 -> eh4". Let "x" denote the transmission rate of "eh1 -> eh2" and "y" denote the rate of "eh1 -> eh4". The objective function is max(x + y). With the ALTO Cost Map, the cost between PID1 and PID2 and between PID1 and PID4 will both be 100 Mbps. The client can get a capacity region of x <= 100 Mbps, y <= 100 Mbps. With this information, the client may mistakenly think it can achieve a maximum total rate of 200 Mbps. However, this rate is infeasible, as there are only two potential cases: * Case 1: "eh1 -> eh2" and "eh1 -> eh4" take different path segments from "sw5" to "sw7". For example, if "eh1 -> eh2" uses path "eh1 -> sw1 -> sw5 -> sw6 -> sw7 -> sw2 -> eh2" and "eh1 -> eh4" uses path "eh1 -> sw1 -> sw5 -> sw7 -> sw4 -> eh4", then the shared bottleneck links are "eh1 -> sw1" and "sw1 -> sw5". In this case, the capacity region is: x <= 100 Mbps y <= 100 Mbps x + y <= 150 Mbps and the real optimal total rate is 150 Mbps. * Case 2: "eh1 -> eh2" and "eh1 -> eh4" take the same path segment from "sw5" to "sw7". For example, if "eh1 -> eh2" uses path "eh1 -> sw1 -> sw5 -> sw7 -> sw2 -> eh2" and "eh1 -> eh4" also uses path "eh1 -> sw1 -> sw5 -> sw7 -> sw4 -> eh4", then the shared bottleneck link is "sw5 -> sw7". In this case, the capacity region is: x <= 100 Mbps y <= 100 Mbps x + y <= 100 Mbps and the real optimal total rate is 100 Mbps. Gao, et al. Expires 21 September 2022 [Page 9] Internet-Draft ALTO-PV March 2022 Clearly, with more accurate and fine-grained information, the application can gain a better prediction of its traffic and may orchestrate its resources accordingly. However, to provide such information, the network needs to expose abstract information beyond the simple cost map abstraction. In particular: * The ALTO server must expose abstract information about the network paths that are traversed by the traffic between a source and a destination beyond a simple numerical value, which allows the overlay application to distinguish between Cases 1 and 2 and to compute the optimal total rate accordingly. * The ALTO server must allow the client to distinguish the common ANE shared by "eh1 -> eh2" and "eh1 -> eh4", e.g., "eh1 - sw1" and "sw1 - sw5" in Case 1. * The ALTO server must expose abstract information on the properties of the ANEs used by "eh1 -> eh2" and "eh1 -> eh4". For example, an ALTO server can either expose the available bandwidth between "eh1 - sw1", "sw1 - sw5", "sw5 - sw7", "sw5 - sw6", "sw6 - sw7", "sw7 - sw2", "sw7 - sw4", "sw2 - eh2", "sw4 - eh4" in Case 1, or expose 3 abstract elements "A", "B" and "C", which represent the linear constraints that define the same capacity region in Case 1. In general, we can conclude that to support the multiple flow scheduling use case, the ALTO framework must be extended to satisfy the following additional requirements: AR1: An ALTO server must provide the ANEs that are important to assess the QoE of the overlay application on the path of a pair. AR2: An ALTO server must provide information to identify how ANEs are shared on the paths of different pairs. AR3: An ALTO server must provide information on the properties that are important to assess the QoE of the application for ANEs. The extension defined in this document specifies a solution to expose such abstract information. 4.2. Sample Use Cases While the multiple flow scheduling problem is used to help identify the additional requirements, the extension defined in this document can be applied to a wide range of applications. This section highlights some use cases that are reported. Gao, et al. Expires 21 September 2022 [Page 10] Internet-Draft ALTO-PV March 2022 4.2.1. Exposing Network Bottlenecks An important use case of the Path Vector extension is to expose network bottlenecks. Applications which need to perform large scale data transfers can benefit from being aware of the resource constraints exposed by this extension even if they have different objectives. One such example is the Worldwide LHC Computing Grid (WLCG), the largest example of a distributed computation collaboration in the research and education world. Figure 3 illustrates an example of using ALTO Path Vector as an interface between the job optimizer for a data analytics system and the network manager. In particular, we assume the objective of the job optimizer is to minimize the job completion time. In such a setting, the network-aware job optimizer (e.g., [CLARINET]) takes a query and generates multiple query execution plans (QEP). It can encode the QEPs as Path Vector requests that are send to an ALTO server. The ALTO server obtains the routing information for the flows in a QEP and finds links, routers, or middleboxes (e.g., a stateful firewall) that can potentially become bottlenecks of the QEP (e.g., see [NOVA] and [G2] for mechanisms to identify bottleneck links under different settings). The resource constraint information is encoded in a Path Vector response and returned to the ALTO client. With the network resource constraints, the job optimizer may choose the QEP with the optimal job completion time to be executed. It must be noted that the ALTO framework itself does not offer the capability to control the traffic. However, certain network managers may offer ways to enforce resource guarantees, such as on-demand tunnels (e.g., [SWAN]), demand vector (e.g., [HUG], [UNICORN]), etc. The traffic control interfaces and mechanisms are out of the scope of this document. Gao, et al. Expires 21 September 2022 [Page 11] Internet-Draft ALTO-PV March 2022 Data schema Queries | | \ / +-------------+ +-----------------+ | ALTO Client | <===============> | Job Optimizer | +-------------+ +-----------------+ PV | ^ PV | Request | | Response | | | On-demand resource | (Data | | (Network allocation, demand | Transfer | | Resource vector, etc. | Intents) | | Constraints) (Non-ALTO interfaces)| v | v +-------------+ +-----------------+ | ALTO Server | <===============> | Network Manager | +-------------+ +-----------------+ / | \ | | | WAN DC1 DC2 Figure 3: Example Use Case for Data Analytics Another example is as illustrated in Figure 4. Consider a network consisting of multiple sites and a non-blocking core network, i.e., the links in the core network have sufficient bandwidth that they will not become the bottleneck of the data transfers. Gao, et al. Expires 21 September 2022 [Page 12] Internet-Draft ALTO-PV March 2022 On-going transfers New transfer requests \----\ | | | v v +-------------+ +---------------+ | ALTO Client | <===========> | Data Transfer | +-------------+ | Scheduler | ^ | ^ | PV request +---------------+ | | | \--------------\ | | \--------------\ | | v PV response | v +-------------+ +-------------+ | ALTO Server | | ALTO Server | +-------------+ +-------------+ || || +---------+ +---------+ | Network | | Network | | Manager | | Manager | +---------+ +---------+ . . . _~_ __ . . . . ( )( ) .___ ~v~v~ /--( )------------( ) ( )-----/ ( ) ( ) ~w~w~ ~^~^~^~ ~v~v~ Site 1 Non-blocking Core Site 2 Figure 4: Example Use Case for Cross-site Bottleneck Discovery Gao, et al. Expires 21 September 2022 [Page 13] Internet-Draft ALTO-PV March 2022 Site 1: [c] . ........................................> [d] +---+ 10 Gbps +---+ 10 Gbps +----+ 50 Gbps | A |---------| B |---------| GW |--------- Core +---+ +---+ +----+ ................... . . . v [a] [b] Site 2: [d] <........................................ [c] +---+ 5 Gbps +---+ 10 Gbps +----+ 20 Gbps | X |--------| Y |---------| GW |--------- Core +---+ +---+ +----+ .................... . . . v [e] [f] Figure 5: Example: Three Flows in Two Sites With the Path Vector extension, a site can reveal the bottlenecks inside its own network with necessary information (such as link capacities) to the ALTO client, instead of providing the full topology and routing information, or no bottleneck information at all. The bottleneck information can be used to analyze the impact of adding/removing data transfer flows, e.g., using the [G2] framework. For example, assume hosts "a", "b", "c" are in site 1 and hosts "d", "e", "f" are in site 2, and there are 3 flows in two sites: "a -> b", "c -> d", "e -> f". For these flows, site 1 returns: a: { b: [ane1] }, c: { d: [ane1, ane2, ane3] } ane1: bw = 10 Gbps (link: A->B) ane2: bw = 10 Gbps (link: B->GW) ane3: bw = 50 Gbps (link: GW->Core) and site 2 returns: Gao, et al. Expires 21 September 2022 [Page 14] Internet-Draft ALTO-PV March 2022 c: { d: [anei, aneii, aneiii] } e: { f: [aneiv] } anei: bw = 5 Gbps (link Y->X) aneii: bw = 10 Gbps (link GW->Y) aneiii: bw = 20 Gbps (link Core->GW) aneiv: bw = 10 Gbps (link Y->GW) With the information, the data transfer scheduler can use algorithms such as the theory on bottleneck structure [G2] to predict the potential throughput of the flows. 4.2.2. Resource Exposure for CDN and Service Edge A growing trend in today's applications (2021) is to bring storage and computation closer to the end users for better QoE, such as Content Delivery Network (CDN), AR/VR, and cloud gaming, as reported in various documents (e.g., [SEREDGE] and [MOWIE]). Internet Service Providers may deploy multiple layers of CDN caches, or more generally service edges, with different latency and available resources including number of CPU cores, memory, and storage. For example, Figure 6 illustrates a typical edge-cloud scenario where memory is measured in Gigabytes (G) and storage is measured in Terabytes (T). The "on-premise" edge nodes are closest to the end hosts and have the smallest latency, and the site-radio edge node and access central office (CO) have larger latency but more available resources. Gao, et al. Expires 21 September 2022 [Page 15] Internet-Draft ALTO-PV March 2022 +-------------+ +----------------------+ | ALTO Client | <==========> | Application Provider | +-------------+ +----------------------+ PV | ^ PV | Request | | Response | Resource allocation, | | | service establishment, (End hosts | | (Edge nodes | etc. and cloud | | and metrics) | servers) | | | v | v +-------------+ +---------------------+ | ALTO Server | <=========> | Cloud-Edge Provider | +-------------+ +---------------------+ ____________________________________/\___________ / \ | (((o | | /_\ _~_ __ __ a (/\_/\) ( ) ( )~( )_ \ /------( )---------( )----\\---( ) _|_ / (______) (___) ( ) |_| -/ Site-radio Access CO (__________) /---\ Edge Node 1 | Cloud DC On premise | /---------/ (((o / | / Site-radio /_\ / Edge Node 2(/\_/\)-----/ /(_____)\ ___ / \ --- b--|_| -/ \--|_|--c /---\ /---\ On premise On premise Figure 6: Example Use Case for Service Edge Exposure Gao, et al. Expires 21 September 2022 [Page 16] Internet-Draft ALTO-PV March 2022 a: { b: [ane1, ane2, ane3, ane4, ane5], c: [ane1, ane2, ane3, ane4, ane6], DC: [ane1, ane2, ane3] } b: { c: [ane5, ane4, ane6], DC: [ane5, ane4, ane3] } ane1: latency=5ms cpu=2 memory=8G storage=10T (on premise, a) ane2: latency=20ms cpu=4 memory=8G storage=10T (Site-radio Edge Node 1) ane3: latency=100ms cpu=8 memory=128G storage=100T (Access CO) ane4: latency=20ms cpu=4 memory=8G storage=10T (Site-radio Edge Node 2) ane5: latency=5ms cpu=2 memory=8G storage=10T (on premise, b) ane6: latency=5ms cpu=2 memory=8G storage=10T (on premise, c) Figure 7: Example Service Edge Query Results With the extension defined in this document, an ALTO server can selectively reveal the CDNs and service edges that reside along the paths between different end hosts and/or the cloud servers, together with their properties such as capabilities (e.g., storage, GPU) and available Service Level Agreement (SLA) plans. See Figure 7 for an example where the query is made for sources [a, b] and destinations [b, c, DC]. Here each ANE represents a service edge and the properties include access latency, available resources, etc. Note the properties here are only used for illustration purposes and are not part of this extension. With the service edge information, an ALTO client may better conduct CDN request routing or offload functionalities from the user equipment to the service edge, with considerations on customized quality of experience. 5. Path Vector Extension: Overview This section provides a non-normative overview of the Path Vector extension defined in this document. It is assumed that the readers are familiar with both the base protocol [RFC7285] and the Unified Property Map extension [I-D.ietf-alto-unified-props-new]. Gao, et al. Expires 21 September 2022 [Page 17] Internet-Draft ALTO-PV March 2022 To satisfy the additional requirements listed in Section 4.1, this extension: 1. introduces the concept of Abstract Network Element (ANE) as the abstraction of components in a network whose properties may have an impact on the end-to-end performance of the traffic handled by those components, 2. extends the Cost Map and Endpoint Cost Service to convey the ANEs traversed by the path of a pair as Path Vectors, and 3. uses the Unified Property Map to convey the association between the ANEs and their properties. Thus, an ALTO client can learn about the ANEs that are important to assess the QoE of different pairs by investigating the corresponding Path Vector value (AR1), identify common ANEs if an ANE appears in the Path Vectors of multiple pairs (AR2), and retrieve the properties of the ANEs by searching the Unified Property Map (AR3). 5.1. Abstract Network Element (ANE) This extension introduces ANE as an indirect and network-agnostic way to specify a component or an aggregation of components of a network whose properties have an impact on the end-to-end performance for application traffic between endpoints. ANEs allow ALTO servers to focus on common properties of different types of network components. For example, the throughput of a flow can be constrained by different components in a network: the capacity of a physical link, the maximum throughput of a firewall, the reserved bandwidth of an MPLS tunnel, etc. See the example below, assume the throughput of the firewall is 100 Mbps and the capacity for link (A, B) is also 100 Mbps, they result in the same constraint on the total throughput of f1 and f2. Thus, they are identical when treated as an ANE. f1 | ^ f1 | | -----------------> +----------+ +---+ +---+ | Firewall | | A |-----| B | +----------+ +---+ +---+ | | -----------------> v | f2 f2 Gao, et al. Expires 21 September 2022 [Page 18] Internet-Draft ALTO-PV March 2022 When an ANE is defined by an ALTO server, it is assigned an identifier by the ALTO server, i.e., a string of type ANEName as specified in Section 6.1, and a set of associated properties. 5.1.1. ANE Entity Domain In this extension, the associations between ANE and the properties are conveyed in a Unified Property Map. Thus, ANEs must constitute an entity domain (Section 5.1 of [I-D.ietf-alto-unified-props-new]), and each ANE property must be an entity property (Section 5.2 of [I-D.ietf-alto-unified-props-new]). Specifically, this document defines a new entity domain called "ane" as specified in Section 6.2 and defines two initial properties for the ANE entity domain. 5.1.2. Ephemeral and Persistent ANEs By design, ANEs are ephemeral and not to be used in further requests to other ALTO resources. More precisely, the corresponding ANE names are no longer valid beyond the scope of a Path Vector response or the incremental update stream for a Path Vector request. Compared with globally unique ANE names, ephemeral ANE has several benefits including better privacy of the ISP's internal structure and more flexible ANE computation. For example, an ALTO server may define an ANE for each aggregated bottleneck link between the sources and destinations specified in the request. For requests with different sources and destinations, the bottlenecks may be different but can safely reuse the same ANE names. The client can still adjust its traffic based on the information but is difficult to infer the underlying topology with multiple queries. However, sometimes an ISP may intend to selectively reveal some "persistent" network components which, opposite to being ephemeral, have a longer life cycle. For example, an ALTO server may define an ANE for each service edge cluster. Once a client chooses to use a service edge, e.g., by deploying some user-defined functions, it may want to stick to the service edge to avoid the complexity of state transition or synchronization, and continuously query the properties of the edge cluster. This document provides a mechanism to expose such network components as persistent ANEs. A persistent ANE has a persistent ID that is registered in a Property Map, together with their properties. See Section 6.2.4 and Section 6.4.2 for more detailed instructions on how to identify ephemeral ANEs and persistent ANEs. Gao, et al. Expires 21 September 2022 [Page 19] Internet-Draft ALTO-PV March 2022 5.1.3. Property Filtering Resource-constrained ALTO clients (see Section 4.1.2 of [RFC7285]) may benefit from the filtering of Path Vector query results at the ALTO server, as an ALTO client may only require a subset of the available properties. Specifically, the available properties for a given resource are announced in the Information Resource Directory as a new capability called "ane-property-names". The properties selected by a client as being of interest are specified in the subsequent Path Vector queries using the filter called 'ane-property-names'. The response includes and only includes the selected properties for the ANEs in the response. The "ane-property-names" capability for Cost Map and for Endpoint Cost Service is specified in Section 7.2.4 and Section 7.3.4 respectively. The "ane-property-names" filter for Cost Map and Endpoint Cost Service is specified in Section 7.2.3 and Section 7.3.3 accordingly. 5.2. Path Vector Cost Type For an ALTO client to correctly interpret the Path Vector, this extension specifies a new cost type called the Path Vector cost type. The Path Vector cost type must convey both the interpretation and semantics in the "cost-mode" and "cost-metric" respectively. Unfortunately, a single "cost-mode" value cannot fully specify the interpretation of a Path Vector, which is a compound data type. For example, in programming languages such as C++ where there existed a JSON array type named JSONArray, a Path Vector will have the type of JSONArray. Instead of extending the "type system" of ALTO, this document takes a simple and backward compatible approach. Specifically, the "cost- mode" of the Path Vector cost type is "array", which indicates the value is a JSON array. Then, an ALTO client must check the value of the "cost-metric". If the value is "ane-path", it means that the JSON array should be further interpreted as a path of ANENames. The Path Vector cost type is specified in Section 6.5. Gao, et al. Expires 21 September 2022 [Page 20] Internet-Draft ALTO-PV March 2022 5.3. Multipart Path Vector Response For a basic ALTO information resource, a response contains only one type of ALTO resources, e.g., Network Map, Cost Map, or Property Map. Thus, only one round of communication is required: An ALTO client sends a request to an ALTO server, and the ALTO server returns a response, as shown in Figure 8. ALTO client ALTO server |-------------- Request ---------------->| |<------------- Response ----------------| Figure 8: A Typical ALTO Request and Response The extension defined in this document, on the other hand, involves two types of information resources: Path Vectors conveyed in an InfoResourceCostMap (defined in Section 11.2.3.6 of [RFC7285]) or an InfoResourceEndpointCostMap (defined in Section 11.5.1.6 of [RFC7285]), and ANE properties conveyed in an InfoResourceProperties (defined in Section 7.6 of [I-D.ietf-alto-unified-props-new]). Instead of two consecutive message exchanges, the extension defined in this document enforces one round of communication. Specifically, the ALTO client must include the source and destination pairs and the requested ANE properties in a single request, and the ALTO server must return a single response containing both the Path Vectors and properties associated with the ANEs in the Path Vectors, as shown in Figure 9. Since the two parts are bundled together in one response message, their orders are interchangeable. See Section 7.2.6 and Section 7.3.6 for details. ALTO client ALTO server |------------- PV Request -------------->| |<----- PV Response (Cost Map Part) -----| |<--- PV Response (Property Map Part) ---| Figure 9: The Path Vector Extension Request and Response This design is based on the following considerations: 1. ANEs may be constructed on demand, and potentially based on the requested properties (See Section 5.1 for more details). If sources and destinations are not in the same request as the properties, an ALTO server either cannot construct ANEs on- demand, or must wait until both requests are received. Gao, et al. Expires 21 September 2022 [Page 21] Internet-Draft ALTO-PV March 2022 2. As ANEs may be constructed on demand, mappings of each ANE to its underlying network devices and resources can be specific to the request. In order to respond to the Property Map request correctly, an ALTO server must store the mapping of each Path Vector request until the client fully retrieves the property information. The "stateful" behavior may substantially harm the server scalability and potentially lead to Denial-of-Service attacks. One approach to realize the one-round communication is to define a new media type to contain both objects, but this violates modular design. This document follows the standard-conforming usage of "multipart/related" media type defined in [RFC2387] to elegantly combine the objects. Path Vectors are encoded in an InfoResourceCostMap or an InfoResourceEndpointCostMap, and the Property Map is encoded in an InfoResourceProperties. They are encapsulated as parts of a multipart message. The modular composition allows ALTO servers and clients to reuse the data models of the existing information resources. Specifically, this document addresses the following practical issues using "multipart/related". 5.3.1. Identifying the Media Type of the Root Object ALTO uses media type to indicate the type of an entry in the Information Resource Directory (IRD) (e.g., "application/alto- costmap+json" for Cost Map and "application/alto-endpointcost+json" for Endpoint Cost Service). Simply putting "multipart/related" as the media type, however, makes it impossible for an ALTO client to identify the type of service provided by related entries. To address this issue, this document uses the "type" parameter to indicate the root object of a multipart/related message. For a Cost Map resource, the "media-type" field in the IRD entry is "multipart/ related" with the parameter "type=application/alto-costmap+json"; for an Endpoint Cost Service, the parameter is "type=application/alto- endpointcost+json". 5.3.2. References to Part Messages As the response of a Path Vector resource is a multipart message with two different parts, it is important that each part can be uniquely identified. Following the designs of [RFC8895], this extension requires that an ALTO server assigns a unique identifier to each part of the multipart response message. This identifier, referred to as a Part Resource ID (See Section 6.6 for details), is present in the part message's "Content-ID" header. By concatenating the Part Resource ID to the identifier of the Path Vector request, an ALTO server/client can uniquely identify the Path Vector Part or the Gao, et al. Expires 21 September 2022 [Page 22] Internet-Draft ALTO-PV March 2022 Property Map part. 6. Specification: Basic Data Types 6.1. ANE Name An ANE Name is encoded as a JSON string with the same format as that of the type PIDName (Section 10.1 of [RFC7285]). The type ANEName is used in this document to indicate a string of this format. 6.2. ANE Entity Domain The ANE entity domain associates property values with the Abstract Network Elements in a Property Map. Accordingly, the ANE entity domain always depends on a Property Map. It must be noted that the term "domain" here does not refer to a network domain. Rather, it is inherited from the "entity domain" defined in Sec 3.2 in [I-D.ietf-alto-unified-props-new] that represents the set of valid entities defined by an ALTO information resource (called the defining information resource). 6.2.1. Entity Domain Type The Entity Domain Type is "ane". 6.2.2. Domain-Specific Entity Identifier The entity identifiers are the ANE Names in the associated Property Map. 6.2.3. Hierarchy and Inheritance There is no hierarchy or inheritance for properties associated with ANEs. 6.2.4. Media Type of Defining Resource The defining resource for entity domain type "ane" MUST be a Property Map, i.e., the media type of defining resources is: application/alto-propmap+json Specifically, for ephemeral ANEs that appear in a Path Vector response, their entity domain names MUST be exactly ".ane" and the defining resource of these ANEs is the Property Map part of the Gao, et al. Expires 21 September 2022 [Page 23] Internet-Draft ALTO-PV March 2022 multipart response. Meanwhile, for any persistent ANE whose defining resource is a Property Map resource, its entity domain name MUST have the format of "PROPMAP.ane" where PROPMAP is the resource ID of the defining resource. Persistent entities are "persistent" because standalone queries can be made by an ALTO client to their defining resource(s) when the connection to the Path Vector service is closed. For example, the defining resource of an ephemeral ANE whose entity identifier is ".ane:NET1" is the Property Map part that contains this identifier. The defining resource of a persistent ANE whose entity identifier is "dc-props.ane:DC1" is the Property Map with the resource ID "dc-props". 6.3. ANE Property Name An ANE Property Name is encoded as a JSON string with the same format as that of Entity Property Name (Section 5.2.2 of [I-D.ietf-alto-unified-props-new]). 6.4. Initial ANE Property Types Two initial ANE property types are specified, "max-reservable- bandwidth" and "persistent-entity-id". Note that these property types do not depend on any information resource. As such, the EntityPropertyName MUST only have the EntityPropertyType part. 6.4.1. Maximum Reservable Bandwidth The maximum reservable bandwidth property ("max-reservable- bandwidth") stands for the maximum bandwidth that can be reserved for all the traffic that traverses an ANE. The value MUST be encoded as a non-negative numerical cost value as defined in Section 6.1.2.1 of [RFC7285] and the unit is bit per second (bps). If this property is requested by the ALTO client but not present for an ANE in the server response, it MUST be interpreted as that the property is not defined for the ANE. This property can be offered in a setting where the ALTO server is part of a network system that provides on-demand resource allocation and the ALTO client is part of a user application. One existing example is [NOVA]: the ALTO server is part of an SDN controller and exposes a list of traversed network elements and associated link bandwidth to the client. The encoding in [NOVA] differs from the Path Vector response defined in this document that the Path Vector part and Property Map part are put in the same JSON object. Gao, et al. Expires 21 September 2022 [Page 24] Internet-Draft ALTO-PV March 2022 In such a framework, the ALTO server exposes resource (e.g., reservable bandwidth) availability information to the ALTO client. How the client makes resource requests based on the information and how the resource allocation is achieved respectively depend on interfaces between the management system and the users or a higher- layer protocol (e.g., SDN network intents or MPLS tunnels), which are out of the scope of this document. 6.4.2. Persistent Entity ID The persistent entity ID property is the entity identifier of the persistent ANE which an ephemeral ANE presents (See Section 5.1.2 for details). The value of this property is encoded with the format EntityID defined in Section 5.1.3 of [I-D.ietf-alto-unified-props-new]. In this format, the entity ID combines: * a defining information resource for the ANE on which a "persistent-entity-id" is queried, which is the Property Map resource defining the ANE as a persistent entity, together with the properties; * the persistent name of the ANE in that Property Map. With this format, the client has all the needed information for further standalone query properties on the persistent ANE. 6.4.3. Examples To illustrate the use of "max-reservable-bandwidth", consider the following network with 5 nodes. Assume the client wants to query the maximum reservable bandwidth from H1 to H2. An ALTO server may split the network into two ANEs: "ane1" that represents the subnetwork with routers A, B, and C, and "ane2" that represents the subnetwork with routers B, D and E. The maximum reservable bandwidth for "ane1" is 15 Mbps (using path A->C->B) and the maximum reservable bandwidth for "ane2" is 20 Mbps (using path B->D->E). 20 Mbps 20 Mbps 10 Mbps +---+ +---+ +---+ /----| B |---| D |----| E |---- H2 +---+/ +---+ +---+ +---+ H1 ----| A | 15 Mbps| +---+\ +---+ \----| C | 15 Mbps +---+ Gao, et al. Expires 21 September 2022 [Page 25] Internet-Draft ALTO-PV March 2022 To illustrate the use of "persistent-entity-id", consider the scenario in Figure 6. As the life cycle of service edges are typically long, they may contain information that is not specific to the query. Such information can be stored in an individual unified property map and later be accessed by an ALTO client. For example, "ane1" in Figure 7 represents the on-premise service edge closest to host a. Assume the properties of the service edges are provided in a unified property map called "se-props" and the ID of the on-premise service edge is "9a0b55f7-7442-4d56-8a2c- b4cc6a8e3aa1", the "persistent-entity-id" of "ane1" will be "se- props.ane:9a0b55f7-7442-4d56-8a2c-b4cc6a8e3aa1". With this persistent entity ID, an ALTO client may send queries to the "se- props" resource with the entity ID ".ane:9a0b55f7-7442-4d56-8a2c- b4cc6a8e3aa1". 6.5. Path Vector Cost Type This document defines a new cost type, which is referred to as the Path Vector cost type. An ALTO server MUST offer this cost type if it supports the extension defined in this document. 6.5.1. Cost Metric: ane-path The cost metric "ane-path" indicates the value of such a cost type conveys an array of ANE names, where each ANE name uniquely represents an ANE traversed by traffic from a source to a destination. An ALTO client MUST interpret the Path Vector as if the traffic between a source and a destination logically traverses the ANEs in the same order as they appear in the Path Vector. When the Path Vector procedures defined in this document are in use, an ALTO server using the "ane-path" cost metric and the "array" cost mode (see Section 6.5.2) MUST return as the cost value a JSON array of ANEName and the client MUST also check that each element contained in the array is an ANEName (Section 6.1). Otherwise, the client MUST discard the response and SHOULD follow the instructions in Section 8.3.4.3 of [RFC7285] to handle the error. Gao, et al. Expires 21 September 2022 [Page 26] Internet-Draft ALTO-PV March 2022 6.5.2. Cost Mode: array The cost mode "array" indicates that every cost value in the response body of a (Filtered) Cost Map or an Endpoint Cost Service MUST be interpreted as a JSON array object. While this cost mode can be applied to all cost metrics, additional specifications will be needed to clarify the semantics of the array cost mode when combined with cost metrics other than 'ane-path'. 6.6. Part Resource ID and Part Content ID A Part Resource ID is encoded as a JSON string with the same format as that of the type ResourceID (Section 10.2 of [RFC7285]). Even though the client-id assigned to a Path Vector request and the Part Resource ID MAY contain up to 64 characters by their own definition, their concatenation (see Section 5.3.2) MUST also conform to the same length constraint. The same requirement applies to the resource ID of the Path Vector resource, too. Thus, it is RECOMMENDED to limit the length of resource ID and client ID related to a Path Vector resource to 31 characters. A Part Content ID conforms to the format of msg-id as specified in [RFC2387] and [RFC5322]. Specifically, it has the following format: "<" PART-RESOURCE-ID "@" DOMAIN-NAME ">" PART-RESOURCE-ID: PART-RESOURCE-ID has the same format as the Part Resource ID. It is used to identify whether a part message is a Path Vector or a Property Map. DOMAIN-NAME: DOMAIN-NAME has the same format as dot-atom-text specified in Section 3.2.3 of [RFC5322]. It must be the domain name of the ALTO server. 7. Specification: Service Extensions 7.1. Notations This document uses the same syntax and notations as introduced in Section 8.2 of RFC 7285 [RFC7285] to specify the extensions to existing ALTO resources and services. Gao, et al. Expires 21 September 2022 [Page 27] Internet-Draft ALTO-PV March 2022 7.2. Multipart Filtered Cost Map for Path Vector This document introduces a new ALTO resource called multipart Filtered Cost Map resource, which allows an ALTO server to provide other ALTO resources associated with the Cost Map resource in the same response. 7.2.1. Media Type The media type of the multipart Filtered Cost Map resource is "multipart/related" and the required "type" parameter MUST have a value of "application/alto-costmap+json". 7.2.2. HTTP Method The multipart Filtered Cost Map is requested using the HTTP POST method. 7.2.3. Accept Input Parameters The input parameters of the multipart Filtered Cost Map are supplied in the body of an HTTP POST request. This document extends the input parameters to a Filtered Cost Map, which is defined as a JSON object of type ReqFilteredCostMap in Section 4.1.2 of RFC 8189 [RFC8189], with a data format indicated by the media type "application/alto- costmapfilter+json", which is a JSON object of type PVReqFilteredCostMap: object { [EntityPropertyName ane-property-names<0..*>;] } PVReqFilteredCostMap : ReqFilteredCostMap; with fields: ane-property-names: A list of selected ANE properties to be included in the response. Each property in this list MUST match one of the supported ANE properties indicated in the resource's "ane- property-names" capability (Section 7.2.4). If the field is not present, it MUST be interpreted as an empty list. Example: Consider the network in Figure 1. If an ALTO client wants to query the "max-reservable-bandwidth" between PID1 and PID2, it can submit the following request. Gao, et al. Expires 21 September 2022 [Page 28] Internet-Draft ALTO-PV March 2022 POST /costmap/pv HTTP/1.1 Host: alto.example.com Accept: multipart/related;type=application/alto-costmap+json, application/alto-error+json Content-Length: 201 Content-Type: application/alto-costmapfilter+json { "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" }, "pids": { "srcs": [ "PID1" ], "dsts": [ "PID2" ] }, "ane-property-names": [ "max-reservable-bandwidth" ] } 7.2.4. Capabilities The multipart Filtered Cost Map resource extends the capabilities defined in Section 4.1.1 of [RFC8189]. The capabilities are defined by a JSON object of type PVFilteredCostMapCapabilities: object { [EntityPropertyName ane-property-names<0..*>;] } PVFilteredCostMapCapabilities : FilteredCostMapCapabilities; with fields: ane-property-names: Defines a list of ANE properties that can be returned. If the field is not present, it MUST be interpreted as an empty list, indicating the ALTO server cannot provide any ANE property. This extension also introduces additional restrictions for the following fields: cost-type-names: The "cost-type-names" field MUST include the Path Vector cost type, unless explicitly documented by a future extension. This also implies that the Path Vector cost type MUST be defined in the "cost-types" of the Information Resource Directory's "meta" field. cost-constraints: If the "cost-type-names" field includes the Path Vector cost type, "cost-constraints" field MUST be "false" or not present unless specifically instructed by a future document. Gao, et al. Expires 21 September 2022 [Page 29] Internet-Draft ALTO-PV March 2022 testable-cost-type-names (Section 4.1.1 of [RFC8189]): If the "cost- type-names" field includes the Path Vector cost type and the "testable-cost-type-names" field is present, the Path Vector cost type MUST NOT be included in the "testable-cost-type-names" field unless specifically instructed by a future document. 7.2.5. Uses This member MUST include the resource ID of the network map based on which the PIDs are defined. If this resource supports "persistent- entity-id", it MUST also include the defining resources of persistent ANEs that may appear in the response. 7.2.6. Response The response MUST indicate an error, using ALTO protocol error handling, as defined in Section 8.5 of [RFC7285], if the request is invalid. The "Content-Type" header of the response MUST be "multipart/related" as defined by [RFC2387] with the following parameters: type: The type parameter is mandatory and MUST be "application/alto- costmap+json". Note that [RFC2387] permits both parameters with and without the double quotes. start: The start parameter is as defined in [RFC2387] and is optional. If present, it MUST have the same value as the "Content-ID" header of the Path Vector part. boundary: The boundary parameter is as defined in Section 5.1.1 of [RFC2046] and is mandatory. The body of the response MUST consist of two parts: * The Path Vector part MUST include "Content-ID" and "Content-Type" in its header. The "Content-Type" MUST be "application/alto- costmap+json". The value of "Content-ID" MUST have the same format as the Part Content ID as specified in Section 6.6. The body of the Path Vector part MUST be a JSON object with the same format as defined in Section 11.2.3.6 of [RFC7285] when the "cost-type" field is present in the input parameters and MUST be a JSON object with the same format as defined in Section 4.1.3 of [RFC8189] if the "multi-cost-types" field is present. The JSON object MUST include the "vtag" field in the "meta" field, which provides the version tag of the returned CostMapData. The resource ID of the version tag MUST follow the format of Gao, et al. Expires 21 September 2022 [Page 30] Internet-Draft ALTO-PV March 2022 resource-id '.' part-resource-id where "resource-id" is the resource Id of the Path Vector resource, and "part-resource-id" has the same value as the PART- RESOURCE-ID in the "Content-ID" of the Path Vector part. The "meta" field MUST also include the "dependent-vtags" field, whose value is a single-element array to indicate the version tag of the network map used, where the network map is specified in the "uses" attribute of the multipart Filtered Cost Map resource in IRD. * The Unified Property Map part MUST also include "Content-ID" and "Content-Type" in its header. The "Content-Type" MUST be "application/alto-propmap+json". The value of "Content-ID" MUST have the same format as the Part Content ID as specified in Section 6.6. The body of the Unified Property Map part is a JSON object with the same format as defined in Section 7.6 of [I-D.ietf-alto-unified-props-new]. The JSON object MUST include the "dependent-vtags" field in the "meta" field. The value of the "dependent-vtags" field MUST be an array of VersionTag objects as defined by Section 10.3 of [RFC7285]. The "vtag" of the Path Vector part MUST be included in the "dependent-vtags". If "persistent-entity-id" is requested, the version tags of the dependent resources that may expose the entities in the response MUST also be included. The PropertyMapData has one member for each ANEName that appears in the Path Vector part, which is an entity identifier belonging to the self-defined entity domain as defined in Section 5.1.2.3 of [I-D.ietf-alto-unified-props-new]. The EntityProps for each ANE has one member for each property that is both 1) associated with the ANE, and 2) specified in the "ane-property-names" in the request. If the Path Vector cost type is not included in the "cost-type" field or the "multi-cost-type" field, the "property- map" field MUST be present and the value MUST be an empty object ({}). A complete and valid response MUST include both the Path Vector part and the Property Map part in the multipart message. If any part is NOT present, the client MUST discard the received information and send another request if necessary. According to [RFC2387], the Path Vector part, whose media type is the same as the "type" parameter of the multipart response message, is the root object. Thus, it is the element the application processes first. Even though the "start" parameter allows it to be placed anywhere in the part sequence, it is RECOMMENDED that the parts Gao, et al. Expires 21 September 2022 [Page 31] Internet-Draft ALTO-PV March 2022 arrive in the same order as they are processed, i.e., the Path Vector part is always put as the first part, followed by the Property Map part. When doing so, an ALTO server MAY choose not to set the "start" parameter, which implies the first part is the root object. Example: Consider the network in Figure 1. The response of the example request in Section 7.2.3 is as follows, where "ANE1" represents the aggregation of all the switches in the network. Gao, et al. Expires 21 September 2022 [Page 32] Internet-Draft ALTO-PV March 2022 HTTP/1.1 200 OK Content-Length: 859 Content-Type: multipart/related; boundary=example-1; type=application/alto-costmap+json --example-1 Content-ID: Content-Type: application/alto-costmap+json { "meta": { "vtag": { "resource-id": "filtered-cost-map-pv.costmap", "tag": "fb20b76204814e9db37a51151faaaef2" }, "dependent-vtags": [ { "resource-id": "my-default-networkmap", "tag": "75ed013b3cb58f896e839582504f6228" } ], "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" } }, "cost-map": { "PID1": { "PID2": ["ANE1"] } } } --example-1 Content-ID: Content-Type: application/alto-propmap+json { "meta": { "dependent-vtags": [ { "resource-id": "filtered-cost-map-pv.costmap", "tag": "fb20b76204814e9db37a51151faaaef2" } ] }, "property-map": { ".ane:ANE1": { "max-reservable-bandwidth": 100000000 } } } Gao, et al. Expires 21 September 2022 [Page 33] Internet-Draft ALTO-PV March 2022 7.3. Multipart Endpoint Cost Service for Path Vector This document introduces a new ALTO resource called multipart Endpoint Cost Service, which allows an ALTO server to provide other ALTO resources associated with the Endpoint Cost Service resource in the same response. 7.3.1. Media Type The media type of the multipart Endpoint Cost Service resource is "multipart/related" and the required "type" parameter MUST have a value of "application/alto-endpointcost+json". 7.3.2. HTTP Method The multipart Endpoint Cost Service resource is requested using the HTTP POST method. 7.3.3. Accept Input Parameters The input parameters of the multipart Endpoint Cost Service resource are supplied in the body of an HTTP POST request. This document extends the input parameters to an Endpoint Cost Service, which is defined as a JSON object of type ReqEndpointCost in Section 4.2.2 of [RFC8189], with a data format indicated by the media type "application/alto-endpointcostparams+json", which is a JSON object of type PVReqEndpointCost: object { [EntityPropertyName ane-property-names<0..*>;] } PVReqEndpointcost : ReqEndpointcostMap; with fields: ane-property-names: This document defines the "ane-property-names" in PVReqEndpointcost as the same as in PVReqFilteredCostMap. See Section 7.2.3. Example: Consider the network in Figure 1. If an ALTO client wants to query the "max-reservable-bandwidth" between eh1 and eh2, it can submit the following request. Gao, et al. Expires 21 September 2022 [Page 34] Internet-Draft ALTO-PV March 2022 POST /ecs/pv HTTP/1.1 Host: alto.example.com Accept: multipart/related;type=application/alto-endpointcost+json, application/alto-error+json Content-Length: 227 Content-Type: application/alto-endpointcostparams+json { "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" }, "endpoints": { "srcs": [ "ipv4:192.0.2.2" ], "dsts": [ "ipv4:192.0.2.18" ] }, "ane-property-names": [ "max-reservable-bandwidth" ] } 7.3.4. Capabilities The capabilities of the multipart Endpoint Cost Service resource are defined by a JSON object of type PVEndpointcostCapabilities, which is defined as the same as PVFilteredCostMapCapabilities. See Section 7.2.4. 7.3.5. Uses If this resource supports "persistent-entity-id", it MUST also include the defining resources of persistent ANEs that may appear in the response. 7.3.6. Response The response MUST indicate an error, using ALTO protocol error handling, as defined in Section 8.5 of [RFC7285], if the request is invalid. The "Content-Type" header of the response MUST be "multipart/related" as defined by [RFC7285] with the following parameters: type: The type parameter MUST be "application/alto- endpointcost+json" and is mandatory. start: The start parameter is as defined in Section 7.2.6. boundary: The boundary parameter is as defined in Section 5.1.1 of [RFC2046] and is mandatory. Gao, et al. Expires 21 September 2022 [Page 35] Internet-Draft ALTO-PV March 2022 The body MUST consist of two parts: * The Path Vector part MUST include "Content-ID" and "Content-Type" in its header. The "Content-Type" MUST be "application/alto- endpointcost+json". The value of "Content-ID" MUST have the same format as the Part Content ID as specified in Section 6.6. The body of the Path Vector part MUST be a JSON object with the same format as defined in Section 11.5.1.6 of [RFC7285] when the "cost-type" field is present in the input parameters and MUST be a JSON object with the same format as defined in Section 4.2.3 of [RFC8189] if the "multi-cost-types" field is present. The JSON object MUST include the "vtag" field in the "meta" field, which provides the version tag of the returned EndpointCostMapData. The resource ID of the version tag MUST follow the format of resource-id '.' part-resource-id where "resource-id" is the resource Id of the Path Vector resource, and "part-resource-id" has the same value as the PART- RESOURCE-ID in the "Content-ID" of the Path Vector part. * The Unified Property Map part MUST also include "Content-ID" and "Content-Type" in its header. The "Content-Type" MUST be "application/alto-propmap+json". The value of "Content-ID" MUST have the same format as the Part Content ID as specified in Section 6.6. The body of the Unified Property Map part MUST be a JSON object with the same format as defined in Section 7.6 of [I-D.ietf-alto-unified-props-new]. The JSON object MUST include the "dependent-vtags" field in the "meta" field. The value of the "dependent-vtags" field MUST be an array of VersionTag objects as defined by Section 10.3 of [RFC7285]. The "vtag" of the Path Vector part MUST be included in the "dependent-vtags". If "persistent-entity-id" is requested, the version tags of the dependent resources that may expose the entities in the response MUST also be included. Gao, et al. Expires 21 September 2022 [Page 36] Internet-Draft ALTO-PV March 2022 The PropertyMapData has one member for each ANEName that appears in the Path Vector part, which is an entity identifier belonging to the self-defined entity domain as defined in Section 5.1.2.3 of [I-D.ietf-alto-unified-props-new]. The EntityProps for each ANE has one member for each property that is both 1) associated with the ANE, and 2) specified in the "ane-property-names" in the request. If the Path Vector cost type is not included in the "cost-type" field or the "multi-cost-type" field, the "property- map" field MUST be present and the value MUST be an empty object ({}). A complete and valid response MUST include both the Path Vector part and the Property Map part in the multipart message. If any part is NOT present, the client MUST discard the received information and send another request if necessary. According to [RFC2387], the Path Vector part, whose media type is the same as the "type" parameter of the multipart response message, is the root object. Thus, it is the element the application processes first. Even though the "start" parameter allows it to be placed anywhere in the part sequence, it is RECOMMENDED that the parts arrive in the same order as they are processed, i.e., the Path Vector part is always put as the first part, followed by the Property Map part. When doing so, an ALTO server MAY choose not to set the "start" parameter, which implies the first part is the root object. Example: Consider the network in Figure 1. The response of the example request in Section 7.3.3 is as follows. Gao, et al. Expires 21 September 2022 [Page 37] Internet-Draft ALTO-PV March 2022 HTTP/1.1 200 OK Content-Length: 845 Content-Type: multipart/related; boundary=example-1; type=application/alto-endpointcost+json --example-1 Content-ID: Content-Type: application/alto-endpointcost+json { "meta": { "vtag": { "resource-id": "ecs-pv.ecs", "tag": "ec137bb78118468c853d5b622ac003f1" }, "dependent-vtags": [ { "resource-id": "my-default-networkmap", "tag": "677fe5f4066848d282ece213a84f9429" } ], "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" } }, "cost-map": { "ipv4:192.0.2.2": { "ipv4:192.0.2.18": ["ANE1"] } } } --example-1 Content-ID: Content-Type: application/alto-propmap+json { "meta": { "dependent-vtags": [ { "resource-id": "ecs-pv.ecs", "tag": "ec137bb78118468c853d5b622ac003f1" } ] }, "property-map": { ".ane:ANE1": { "max-reservable-bandwidth": 100000000 } } } Gao, et al. Expires 21 September 2022 [Page 38] Internet-Draft ALTO-PV March 2022 8. Examples This section lists some examples of Path Vector queries and the corresponding responses. Some long lines are truncated for better readability. 8.1. Sample Setup ----- L1 / PID1 +----------+ 10 Gbps +----------+ PID3 192.0.2.0/28+-+ +------+ +---------+ +--+192.0.2.32/28 | | MEC1 | | | | 2001:db8::3:0/16 | +------+ | +-----+ | PID2 | | | +----------+ 192.0.2.16/28+-+ | | NET3 | | | 15 Gbps | | | \ +----------+ | -------- L2 NET1 | +----------+ | +------+ | PID4 | | MEC2 | +--+192.0.2.48/28 | +------+ | 2001:db8::4:0/16 +----------+ NET2 Figure 10: Examples of ANE Properties In this document, Figure 10 is used to illustrate the message contents. There are 3 sub-networks (NET1, NET2 and NET3) and two interconnection links (L1 and L2). It is assumed that each sub- network has sufficiently large bandwidth to be reserved. 8.2. Information Resource Directory To give a comprehensive example of the extension defined in this document, we consider the network in Figure 10. Assume that the ALTO server provides the following information resources: * "my-default-networkmap": A Network Map resource which contains the PIDs in the network. * "filtered-cost-map-pv": A Multipart Filtered Cost Map resource for Path Vector, which exposes the "max-reservable-bandwidth" property for the PIDs in "my-default-networkmap". Gao, et al. Expires 21 September 2022 [Page 39] Internet-Draft ALTO-PV March 2022 * "ane-props": A filtered Unified Property resource that exposes the information for persistent ANEs in the network. * "endpoint-cost-pv": A Multipart Endpoint Cost Service for Path Vector, which exposes the "max-reservable-bandwidth" and the "persistent-entity-id" properties. * "update-pv": An Update Stream service, which provides the incremental update service for the "endpoint-cost-pv" service. * "multicost-pv": A Multipart Endpoint Cost Service with both Multi- Cost and Path Vector. Below is the Information Resource Directory of the example ALTO server. To enable the extension defined in this document, the "path- vector" cost type (Section 6.5) is defined in the "cost-types" of the "meta" field, and is included in the "cost-type-names" of resources "filtered-cost-map-pv" and "endpoint-cost-pv". { "meta": { "cost-types": { "path-vector": { "cost-mode": "array", "cost-metric": "ane-path" }, "num-rc": { "cost-mode": "numerical", "cost-metric": "routingcost" } } }, "resources": { "my-default-networkmap": { "uri": "https://alto.example.com/networkmap", "media-type": "application/alto-networkmap+json" }, "filtered-cost-map-pv": { "uri": "https://alto.example.com/costmap/pv", "media-type": "multipart/related; type=application/alto-costmap+json", "accepts": "application/alto-costmapfilter+json", "capabilities": { "cost-type-names": [ "path-vector" ], "ane-property-names": [ "max-reservable-bandwidth" ] }, "uses": [ "my-default-networkmap" ] }, Gao, et al. Expires 21 September 2022 [Page 40] Internet-Draft ALTO-PV March 2022 "ane-props": { "uri": "https://alto.example.com/ane-props", "media-type": "application/alto-propmap+json", "accepts": "application/alto-propmapparams+json", "capabilities": { "mappings": { ".ane": [ "cpu" ] } } }, "endpoint-cost-pv": { "uri": "https://alto.exmaple.com/endpointcost/pv", "media-type": "multipart/related; type=application/alto-endpointcost+json", "accepts": "application/alto-endpointcostparams+json", "capabilities": { "cost-type-names": [ "path-vector" ], "ane-property-names": [ "max-reservable-bandwidth", "persistent-entity-id" ] }, "uses": [ "ane-props" ] }, "update-pv": { "uri": "https://alto.example.com/updates/pv", "media-type": "text/event-stream", "uses": [ "endpoint-cost-pv" ], "accepts": "application/alto-updatestreamparams+json", "capabilities": { "support-stream-control": true } }, "multicost-pv": { "uri": "https://alto.exmaple.com/endpointcost/mcpv", "media-type": "multipart/related; type=application/alto-endpointcost+json", "accepts": "application/alto-endpointcostparams+json", "capabilities": { "cost-type-names": [ "path-vector", "num-rc" ], "max-cost-types": 2, "testable-cost-type-names": [ "num-rc" ], "ane-property-names": [ "max-reservable-bandwidth", "persistent-entity-id" ] }, "uses": [ "ane-props" ] } } Gao, et al. Expires 21 September 2022 [Page 41] Internet-Draft ALTO-PV March 2022 } 8.3. Multipart Filtered Cost Map The following examples demonstrate the request to the "filtered-cost- map-pv" resource and the corresponding response. The request uses the "path-vector" cost type in the "cost-type" field. The "ane-property-names" field is missing, indicating that the client only requests for the Path Vector but not the ANE properties. The response consists of two parts. The first part returns the array of ANEName for each source and destination pair. There are two ANEs, where "L1" represents the interconnection link L1, and "L2" represents the interconnection link L2. The second part returns an empty Property Map. Note that the ANE entries are omitted since they have no properties (See Section 3.1 of [I-D.ietf-alto-unified-props-new]). POST /costmap/pv HTTP/1.1 Host: alto.example.com Accept: multipart/related;type=application/alto-costmap+json, application/alto-error+json Content-Length: 153 Content-Type: application/alto-costmapfilter+json { "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" }, "pids": { "srcs": [ "PID1" ], "dsts": [ "PID3", "PID4" ] } } HTTP/1.1 200 OK Content-Length: 855 Content-Type: multipart/related; boundary=example-1; type=application/alto-costmap+json --example-1 Content-ID: Content-Type: application/alto-costmap+json Gao, et al. Expires 21 September 2022 [Page 42] Internet-Draft ALTO-PV March 2022 { "meta": { "vtag": { "resource-id": "filtered-cost-map-pv.costmap", "tag": "d827f484cb66ce6df6b5077cb8562b0a" }, "dependent-vtags": [ { "resource-id": "my-default-networkmap", "tag": "c04bc5da49534274a6daeee8ea1dec62" } ], "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" } }, "cost-map": { "PID1": { "PID3": [ "L1" ], "PID4": [ "L1", "L2" ] } } } --example-1 Content-ID: Content-Type: application/alto-propmap+json { "meta": { "dependent-vtags": [ { "resource-id": "filtered-cost-map-pv.costmap", "tag": "d827f484cb66ce6df6b5077cb8562b0a" } ] }, "property-map": { } } 8.4. Multipart Endpoint Cost Service Resource The following examples demonstrate the request to the "endpoint-cost- pv" resource and the corresponding response. Gao, et al. Expires 21 September 2022 [Page 43] Internet-Draft ALTO-PV March 2022 The request uses the Path Vector cost type in the "cost-type" field, and queries the Maximum Reservable Bandwidth ANE property and the Persistent Entity property for two IPv4 source and destination pairs (192.0.2.34 -> 192.0.2.2 and 192.0.2.34 -> 192.0.2.50) and one IPv6 source and destination pair (2001:db8::3:1 -> 2001:db8::4:1). The response consists of two parts. The first part returns the array of ANEName for each valid source and destination pair. As one can see in Figure 10, flow 192.0.2.34 -> 192.0.2.2 traverses NET2, L1 and NET1, and flows 192.0.2.34 -> 192.0.2.50 and 2001:db8::3:1 -> 2001:db8::4:1 traverse NET2, L2 and NET3. The second part returns the requested properties of ANEs. Assume NET1, NET2 and NET3 has sufficient bandwidth and their "max- reservable-bandwidth" values are set to a sufficiently large number (50 Gbps in this case). On the other hand, assume there are no prior reservation on L1 and L2, and their "max-reservable-bandwidth" values are the corresponding link capacity (10 Gbps for L1 and 15 Gbps for L2). Both NET1 and NET2 have a mobile edge deployed, i.e., MEC1 in NET1 and MEC2 in NET2. Assume the ANEName for MEC1 and MEC2 are "MEC1" and "MEC2" and their properties can be retrieved from the Property Map "ane-props". Thus, the "persistent-entity-id" property of NET1 and NET3 are "ane-props.ane:MEC1" and "ane-props.ane:MEC2" respectively. Gao, et al. Expires 21 September 2022 [Page 44] Internet-Draft ALTO-PV March 2022 POST /endpointcost/pv HTTP/1.1 Host: alto.example.com Accept: multipart/related; type=application/alto-endpointcost+json, application/alto-error+json Content-Length: 362 Content-Type: application/alto-endpointcostparams+json { "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" }, "endpoints": { "srcs": [ "ipv4:192.0.2.34", "ipv6:2001:db8::3:1" ], "dsts": [ "ipv4:192.0.2.2", "ipv4:192.0.2.50", "ipv6:2001:db8::4:1" ] }, "ane-property-names": [ "max-reservable-bandwidth", "persistent-entity-id" ] } HTTP/1.1 200 OK Content-Length: 1432 Content-Type: multipart/related; boundary=example-2; type=application/alto-endpointcost+json --example-2 Content-ID: Content-Type: application/alto-endpointcost+json { "meta": { "vtags": { "resource-id": "endpoint-cost-pv.ecs", "tag": "bb6bb72eafe8f9bdc4f335c7ed3b10822a391cef" }, "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" Gao, et al. Expires 21 September 2022 [Page 45] Internet-Draft ALTO-PV March 2022 } }, "endpoint-cost-map": { "ipv4:192.0.2.34": { "ipv4:192.0.2.2": [ "NET3", "L1", "NET1" ], "ipv4:192.0.2.50": [ "NET3", "L2", "NET2" ] }, "ipv6:2001:db8::3:1": { "ipv6:2001:db8::4:1": [ "NET3", "L2", "NET2" ] } } } --example-2 Content-ID: Content-Type: application/alto-propmap+json { "meta": { "dependent-vtags": [ { "resource-id": "endpoint-cost-pv.ecs", "tag": "bb6bb72eafe8f9bdc4f335c7ed3b10822a391cef" }, { "resource-id": "ane-props", "tag": "bf3c8c1819d2421c9a95a9d02af557a3" } ] }, "property-map": { ".ane:NET1": { "max-reservable-bandwidth": 50000000000, "persistent-entity-id": "ane-props.ane:MEC1" }, ".ane:NET2": { "max-reservable-bandwidth": 50000000000, "persistent-entity-id": "ane-props.ane:MEC2" }, ".ane:NET3": { "max-reservable-bandwidth": 50000000000 }, ".ane:L1": { "max-reservable-bandwidth": 10000000000 }, ".ane:L2": { "max-reservable-bandwidth": 15000000000 } } Gao, et al. Expires 21 September 2022 [Page 46] Internet-Draft ALTO-PV March 2022 } Under certain scenarios where the traversal order is not crucial, an ALTO server implementation may choose to not follow strictly the physical traversal order and may even obfuscate the order intentionally to preserve its own privacy or conform to its own policies. For example, an ALTO server may choose to aggregate NET1 and L1 as a new ANE with ANE name "AGGR1", and aggregate NET2 and L2 as a new ANE with ANE name "AGGR2". The "max-reservable-bandwidth" of "AGGR1" takes the value of L1, which is smaller than that of NET1, and the "persistent-entity-id" of "AGGR1" takes the value of NET1. The properties of "AGGR2" are computed in a similar way and the obfuscated response is as shown below. Note that the obfuscation of Path Vector responses is implementation-specific and is out of the scope of this document, and developers may refer to Section 11 for further references. HTTP/1.1 200 OK Content-Length: 1263 Content-Type: multipart/related; boundary=example-2; type=application/alto-endpointcost+json --example-2 Content-ID: Content-Type: application/alto-endpointcost+json { "meta": { "vtags": { "resource-id": "endpoint-cost-pv.ecs", "tag": "bb975862fbe3422abf4dae386b132c1d" }, "cost-type": { "cost-mode": "array", "cost-metric": "ane-path" } }, "endpoint-cost-map": { "ipv4:192.0.2.34": { "ipv4:192.0.2.2": [ "NET3", "AGGR1" ], "ipv4:192.0.2.50": [ "NET3", "AGGR2" ] }, "ipv6:2001:db8::3:1": { "ipv6:2001:db8::4:1": [ "NET3", "AGGR2" ] } } } --example-2 Gao, et al. Expires 21 September 2022 [Page 47] Internet-Draft ALTO-PV March 2022 Content-ID: Content-Type: application/alto-propmap+json { "meta": { "dependent-vtags": [ { "resource-id": "endpoint-cost-pv.ecs", "tag": "bb975862fbe3422abf4dae386b132c1d" }, { "resource-id": "ane-props", "tag": "bf3c8c1819d2421c9a95a9d02af557a3" } ] }, "property-map": { ".ane:AGGR1": { "max-reservable-bandwidth": 10000000000, "persistent-entity-id": "ane-props.ane:MEC1" }, ".ane:AGGR2": { "max-reservable-bandwidth": 15000000000, "persistent-entity-id": "ane-props.ane:MEC2" }, ".ane:NET3": { "max-reservable-bandwidth": 50000000000 } } } 8.5. Incremental Updates In this example, an ALTO client subscribes to the incremental update for the multipart Endpoint Cost Service resource "endpoint-cost-pv". Gao, et al. Expires 21 September 2022 [Page 48] Internet-Draft ALTO-PV March 2022 POST /updates/pv HTTP/1.1 Host: alto.example.com Accept: text/event-stream Content-Type: application/alto-updatestreamparams+json Content-Length: 112 { "add": { "ecspvsub1": { "resource-id": "endpoint-cost-pv", "input": } } } Based on the server-side process defined in [RFC8895], the ALTO server will send the "control-uri" first using Server-Sent Event (SSE), followed by the full response of the multipart message. HTTP/1.1 200 OK Connection: keep-alive Content-Type: text/event-stream event: application/alto-updatestreamcontrol+json data: {"control-uri": "https://alto.example.com/updates/streams/123"} event: multipart/related;boundary=example-3; type=application/alto-endpointcost+json,ecspvsub1 data: --example-3 data: Content-ID: data: Content-Type: application/alto-endpointcost+json data: data: data: --example-3 data: Content-ID: data: Content-Type: application/alto-propmap+json data: data: data: --example-3-- When the contents change, the ALTO server will publish the updates for each node in this tree separately, based on Section 6.7.3 of [RFC8895]. Gao, et al. Expires 21 September 2022 [Page 49] Internet-Draft ALTO-PV March 2022 event: application/merge-patch+json, ecspvsub1.ecsmap@alto.example.com data: event: application/merge-patch+json, ecspvsub1.propmap@alto.example.com data: 8.6. Multi-cost The following examples demonstrate the request to the "multicost-pv" resource and the corresponding response. The request asks for two cost types: the first is the Path Vector cost type, and the second is a numerical routing cost. It also queries the Maximum Reservable Bandwidth ANE property and the Persistent Entity property for two IPv4 source and destination pairs (192.0.2.34 -> 192.0.2.2 and 192.0.2.34 -> 192.0.2.50) and one IPv6 source and destination pair (2001:db8::3:1 -> 2001:db8::4:1). The response consists of two parts. The first part returns a JSONArray that contains two JSONValue for each requested source and destination pair: the first JSONValue is a JSONArray of ANENames, which is the value of the Path Vector cost type, and the second JSONValue is a JSONNumber which is the value of the routing cost. The second part contains a Property Map that maps the ANEs to their requested properties. Gao, et al. Expires 21 September 2022 [Page 50] Internet-Draft ALTO-PV March 2022 POST /endpointcost/mcpv HTTP/1.1 Host: alto.example.com Accept: multipart/related; type=application/alto-endpointcost+json, application/alto-error+json Content-Length: 433 Content-Type: application/alto-endpointcostparams+json { "multi-cost-types": [ { "cost-mode": "array", "cost-metric": "ane-path" }, { "cost-mode": "numerical", "cost-metric": "routingcost" } ], "endpoints": { "srcs": [ "ipv4:192.0.2.34", "ipv6:2001:db8::3:1" ], "dsts": [ "ipv4:192.0.2.2", "ipv4:192.0.2.50", "ipv6:2001:db8::4:1" ] }, "ane-property-names": [ "max-reservable-bandwidth", "persistent-entity-id" ] } HTTP/1.1 200 OK Content-Length: 1350 Content-Type: multipart/related; boundary=example-4; type=application/alto-endpointcost+json --example-4 Content-ID: Content-Type: application/alto-endpointcost+json { "meta": { "vtags": { "resource-id": "endpoint-cost-pv.ecs", "tag": "84a4f9c14f9341f0983e3e5f43a371c8" }, "multi-cost-types": [ { "cost-mode": "array", "cost-metric": "ane-path" }, { "cost-mode": "numerical", "cost-metric": "routingcost" } Gao, et al. Expires 21 September 2022 [Page 51] Internet-Draft ALTO-PV March 2022 ] }, "endpoint-cost-map": { "ipv4:192.0.2.34": { "ipv4:192.0.2.2": [[ "NET3", "AGGR1" ], 3], "ipv4:192.0.2.50": [[ "NET3", "AGGR2" ], 2] }, "ipv6:2001:db8::3:1": { "ipv6:2001:db8::4:1": [[ "NET3", "AGGR2" ], 2] } } } --example-4 Content-ID: Content-Type: application/alto-propmap+json { "meta": { "dependent-vtags": [ { "resource-id": "endpoint-cost-pv.ecs", "tag": "84a4f9c14f9341f0983e3e5f43a371c8" }, { "resource-id": "ane-props", "tag": "be157afa031443a187b60bb80a86b233" } ] }, "property-map": { ".ane:AGGR1": { "max-reservable-bandwidth": 10000000000, "persistent-entity-id": "ane-props.ane:MEC1" }, ".ane:AGGR2": { "max-reservable-bandwidth": 15000000000, "persistent-entity-id": "ane-props.ane:MEC2" }, ".ane:NET3": { "max-reservable-bandwidth": 50000000000 } } } 9. Compatibility with Other ALTO Extensions Gao, et al. Expires 21 September 2022 [Page 52] Internet-Draft ALTO-PV March 2022 9.1. Compatibility with Legacy ALTO Clients/Servers The multipart Filtered Cost Map resource and the multipart Endpoint Cost Service resource has no backward compatibility issue with legacy ALTO clients and servers. Although these two types of resources reuse the media types defined in the base ALTO protocol for the accept input parameters, they have different media types for responses. If the ALTO server provides these two types of resources, but the ALTO client does not support them, the ALTO client will ignore the resources without incurring any incompatibility problem. 9.2. Compatibility with Multi-Cost Extension The extension defined in this document is compatible with the multi- cost extension [RFC8189]. Such a resource has a media type of either "multipart/related; type=application/alto-costmap+json" or "multipart/related; type=application/alto-endpointcost+json". Its "cost-constraints" field must either be "false" or not present and the Path Vector cost type must be present in the "cost-type-names" capability field but must not be present in the "testable-cost-type- names" field, as specified in Section 7.2.4 and Section 7.3.4. 9.3. Compatibility with Incremental Update This extension is compatible with the incremental update extension [RFC8895]. ALTO clients and servers MUST follow the specifications given in Sections 5.2 and 6.7.3 of [RFC8895] to support incremental updates for a Path Vector resource. 9.4. Compatibility with Cost Calendar The extension specified in this document is compatible with the Cost Calendar extension [RFC8896]. When used together with the Cost Calendar extension, the cost value between a source and a destination is an array of Path Vectors, where the k-th Path Vector refers to the abstract network paths traversed in the k-th time interval by traffic from the source to the destination. When used with time-varying properties, e.g., maximum reservable bandwidth, a property of a single ANE may also have different values in different time intervals. In this case, if such an ANE has different property values in two time intervals, it MUST be treated as two different ANEs, i.e., with different entity identifiers. However, if it has the same property values in two time intervals, it MAY use the same identifier. Gao, et al. Expires 21 September 2022 [Page 53] Internet-Draft ALTO-PV March 2022 This rule allows the Path Vector extension to represent both changes of ANEs and changes of the ANEs' properties in a uniform way. The Path Vector part is calendared in a compatible way, and the Property Map part is not affected by the calendar extension. The two extensions combined together can provide the historical network correlation information for a set of source and destination pairs. A network broker or client may use this information to derive other resource requirements such as Time-Block-Maximum Bandwidth, Bandwidth-Sliding-Window, and Time-Bandwidth-Product (TBP) (See [SENSE] for details). 10. General Discussions 10.1. Constraint Tests for General Cost Types The constraint test is a simple approach to query the data. It allows users to filter the query result by specifying some boolean tests. This approach is already used in the ALTO protocol. [RFC7285] and [RFC8189] allow ALTO clients to specify the "constraints" and "or-constraints" tests to better filter the result. However, the current syntax can only be used to test scalar cost types, and cannot easily express constraints on complex cost types, e.g., the Path Vector cost type defined in this document. In practice, developing a bespoke language for general-purpose boolean tests can be a complex undertaking, and it is conceivable that there are some existing implementations already (the authors have not done an exhaustive search to determine whether there are such implementations). One avenue to develop such a language may be to explore extending current query languages like XQuery [XQuery] or JSONiq [JSONiq] and integrating these with ALTO. Filtering the Path Vector results or developing a more sophisticated filtering mechanism is beyond the scope of this document. 10.2. General Multi-Resource Query Querying multiple ALTO information resources continuously is a general requirement. Enabling such a capability, however, must address general issues like efficiency and consistency. The incremental update extension [RFC8895] supports submitting multiple queries in a single request, and allows flexible control over the queries. However, it does not cover the case introduced in this document where multiple resources are needed for a single request. Gao, et al. Expires 21 September 2022 [Page 54] Internet-Draft ALTO-PV March 2022 This extension gives an example of using a multipart message to encode the responses from two specific ALTO information resources: a Filtered Cost Map or an Endpoint Cost Service, and a Property Map. By packing multiple resources in a single response, the implication is that servers may proactively push related information resources to clients. Thus, it is worth looking into the direction of extending the SSE mechanism as used in the incremental update extension [RFC8895], or upgrading to HTTP/2 [I-D.ietf-httpbis-http2bis] and HTTP/3 [I-D.ietf-quic-http], which provides the ability to multiplex queries and to allow servers proactively send related information resources. Defining a general multi-resource query mechanism is out of the scope of this document. 11. Security Considerations This document is an extension of the base ALTO protocol, so the Security Considerations [RFC7285] of the base ALTO protocol fully apply when this extension is provided by an ALTO server. The Path Vector extension requires additional scrutiny on three security considerations discussed in the base protocol: confidentiality of ALTO information (Section 15.3 of [RFC7285]), potential undesirable guidance from authenticated ALTO information (Section 15.2 of [RFC7285]), and availability of ALTO service (Section 15.5 of [RFC7285]). For confidentiality of ALTO information, a network operator should be aware that this extension may introduce a new risk: the Path Vector information, when used together with sensitive ANE properties such as capacities of bottleneck links, may make network attacks easier. For example, as the Path Vector information may reveal more fine-grained internal network structures than the base protocol, an attacker may identify the bottleneck link and start a distributed denial-of- service (DDoS) attack involving minimal flows to conduct the in- network congestion. Given the potential risk of leaking sensitive information, the Path Vector extension is mainly applicable in scenarios where 1) the ANE structures and ANE properties do not impose security risks to the ALTO service provider, e.g., not carrying sensitive information, or 2) the ALTO server and client have established a reliable trust relationship, for example, operated in the same administrative domain, or managed by business partners with legal contracts. Gao, et al. Expires 21 September 2022 [Page 55] Internet-Draft ALTO-PV March 2022 Three risk types are identified in Section 15.3.1 of [RFC7285]: (1) Excess disclosure of the ALTO service provider's data to an unauthorized ALTO client; (2) Disclosure of the ALTO service provider's data (e.g., network topology information or endpoint addresses) to an unauthorized third party; and (3) Excess retrieval of the ALTO service provider's data by collaborating ALTO clients. To mitigate these risks, an ALTO server MUST follow the guidelines in Section 15.3.2 of [RFC7285]. Furthermore, an ALTO server MUST follow the following additional protections strategies for risk types (1) and (3). For risk type (1), an ALTO server MUST use the authentication methods specified in Section 15.3.2 of [RFC7285] to authenticate the identify of an ALTO client, and apply access control techniques to restrict unprivileged ALTO clients from retrieving sensitive Path Vector information. For settings where the ALTO server and client are not in the same trust domain, the ALTO server should reach agreements with the ALTO client on protecting the confidentiality before granting the access to Path Vector service with sensitive information. Such agreements may include legal contracts or Digital Right Management (DRM) techniques. Otherwise, the ALTO server MUST NOT offer the Path Vector service carrying sensitive information to the clients unless the potential risks are fully assessed and mitigated. For risk type (3), an ALTO service provider must be aware that persistent ANEs may be used as "landmarks" in collaborative inferences. Thus, they should only be used when exposing public service access points (e.g., API gateways, CDNi) and/or when the granularity is coarse-grained (e.g., when an ANE represents an AS, a data center or a WAN). Otherwise, an ALTO server MUST use dynamic mappings from ephemeral ANE names to underlying physical entities. Specifically, for the same physical entity, an ALTO server SHOULD assign a different ephemeral ANE name when the entity appears in the responses to different clients or even for different request from the same client. A RECOMMENDED assignment strategy is to generate ANE names from random numbers. Further, to protect the network topology from graph reconstruction (e.g., through isomorphic graph identification [BONDY]), the ALTO server SHOULD consider protection mechanisms to reduce information exposure or obfuscate the real information. When doing so, the ALTO server must be aware that information reduction/obfuscation may lead to potential Undesirable Guidance from Authenticated ALTO Information risk (Section 15.2 of [RFC7285]). Gao, et al. Expires 21 September 2022 [Page 56] Internet-Draft ALTO-PV March 2022 Thus, implementations of ALTO servers involving reduction or obfuscation of the Path Vector information SHOULD consider reduction/ obfuscation mechanisms that can preserve the integrity of ALTO information, for example, by using minimal feasible region compression algorithms [NOVA] or obfuscation protocols [RESA][MERCATOR]. However, these obfuscation methods are experimental and their practical applicability of these methods to the generic capability provided by this extension is not fully assessed. The ALTO server MUST carefully verify that the deployment scenario satisfies the security assumptions of these methods before applying them to protect Path Vector services with sensitive network information. For availability of ALTO service, an ALTO server should be cognizant that using Path Vector extension might have a new risk: frequent requesting for Path Vectors might consume intolerable amounts of the server-side computation and storage, which can break the ALTO server. For example, if an ALTO server implementation dynamically computes the Path Vectors for each request, the service providing Path Vectors may become an entry point for denial-of-service attacks on the availability of an ALTO server. To mitigate this risk, an ALTO server may consider using optimizations such as precomputation-and-projection mechanisms [MERCATOR] to reduce the overhead for processing each query. Also, an ALTO server may also protect itself from malicious clients by monitoring the behaviors of clients and stopping serving clients with suspicious behaviors (e.g., sending requests at a high frequency). The ALTO service providers must be aware that providing incremental updates of the "max-reservable-bandwidth" may provide information about other consumers of the network. For example, a change of the value may indicate one or more reservations has been made or changed. To mitigate this risk, an ALTO server can batch the updates and/or add a random delay before publishing the updates. 12. IANA Considerations 12.1. ALTO Cost Metric Registry This document registers a new entry to the ALTO Cost Metric Registry, as instructed by Section 14.2 of [RFC7285]. The new entry is as shown below in Table 1. Gao, et al. Expires 21 September 2022 [Page 57] Internet-Draft ALTO-PV March 2022 +============+====================+=========================+ | Identifier | Intended Semantics | Security Considerations | +============+====================+=========================+ | ane-path | See Section 6.5.1 | See Section 11 | +------------+--------------------+-------------------------+ Table 1: ALTO Cost Metric Registry 12.2. ALTO Cost Mode Registry This document registers a new entry to the ALTO Cost Mode Registry, as instructed by Section 4 of [I-D.bw-alto-cost-mode]. The new entry is as shown below in Table 2. +============+====================+ | Identifier | Intended Semantics | +============+====================+ | array | See Section 6.5.2 | +------------+--------------------+ Table 2: ALTO Cost Mode Registry 12.3. ALTO Entity Domain Type Registry This document registers a new entry to the ALTO Domain Entity Type Registry, as instructed by Section 12.2 of [I-D.ietf-alto-unified-props-new]. The new entry is as shown below in Table 3. +============+============+=============+===================+=======+ | Identifier |Entity | Hierarchy & |Media Type of |Mapping| | |Identifier | Inheritance |Defining Resoucrce |to ALTO| | |Encoding | | |Address| | | | | |Type | +============+============+=============+===================+=======+ | ane |See Section | None |application/alto- |false | | |6.2.2 | |propmap+json | | +------------+------------+-------------+-------------------+-------+ Table 3: ALTO Entity Domain Type Registry Identifier: See Section 6.2.1. Entity Identifier Encoding: See Section 6.2.2. Hierarchy: None Inheritance: None Gao, et al. Expires 21 September 2022 [Page 58] Internet-Draft ALTO-PV March 2022 Media Type of Defining Resource: See Section 6.2.4. Mapping to ALTO Address Type: This entity type does not map to ALTO address type. Security Considerations: In some usage scenarios, ANE addresses carried in ALTO Protocol messages may reveal information about an ALTO client or an ALTO service provider. Applications and ALTO service providers using addresses of ANEs will be made aware of how (or if) the addressing scheme relates to private information and network proximity, in further iterations of this document. 12.4. ALTO Entity Property Type Registry Two initial entries "max-reservable-bandwidth" and "persistent- entity-id" are registered to the ALTO Domain "ane" in the "ALTO Entity Property Type Registry", as instructed by Section 12.3 of [I-D.ietf-alto-unified-props-new]. The two new entries are shown below in Table 4 and their details can be found in Section 12.4.1 and Section 12.4.2. +==========================+====================+===================+ | Identifier | Intended | Media Type of | | | Semantics | Defining Resource | +==========================+====================+===================+ | max-reservable-bandwidth | See Section | application/alto- | | | 6.4.1 | propmap+json | +--------------------------+--------------------+-------------------+ | persistent-entity-id | See Section | application/alto- | | | 6.4.2 | propmap+json | +--------------------------+--------------------+-------------------+ Table 4: Initial Entries for ane Domain in the ALTO Entity Property Types Registry 12.4.1. New ANE Property Type: Maximum Reservable Bandwidth Identifier: "max-reservable-bandwidth" Intended Semantics: See Section 6.4.1. Media Type of Defining Resource: application/alto-propmap+json Security Considerations: This property is essential for applications such as large-scale data transfers or overlay network interconnection to make better choice of bandwidth reservation. It may reveal the bandwidth usage of the underlying network and can potentially be leveraged to reduce the cost of conducting Gao, et al. Expires 21 September 2022 [Page 59] Internet-Draft ALTO-PV March 2022 denial-of-service attacks. Thus, the ALTO server MUST consider protection mechanisms including only providing the information to authorized clients, and information reduction and obfuscation as introduced in Section 11. 12.4.2. New ANE Property Type: Persistent Entity ID Identifier: "persistent-entity-id" Intended Semantics: See Section 6.4.2. Media Type of Defining Resource: application/alto-propmap+json Security Considerations: This property is useful when an ALTO server wants to selectively expose certain service points whose detailed properties can be further queried by applications. The entity IDs may consider sensitive information about the underlying network, and an ALTO server should follow the security considerations in Section 11 of [I-D.ietf-alto-unified-props-new]. 13. References 13.1. Normative References [I-D.bw-alto-cost-mode] Boucadair, M. and Q. Wu, "A Cost Mode Registry for the Application-Layer Traffic Optimization (ALTO) Protocol", Work in Progress, Internet-Draft, draft-bw-alto-cost-mode- 01, 4 March 2022, . [I-D.ietf-alto-unified-props-new] Roome, W., Randriamasy, S., Yang, Y. R., Zhang, J. J., and K. Gao, "An ALTO Extension: Entity Property Maps", Work in Progress, Internet-Draft, draft-ietf-alto-unified-props- new-24, 28 February 2022, . [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, November 1996, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . Gao, et al. Expires 21 September 2022 [Page 60] Internet-Draft ALTO-PV March 2022 [RFC2387] Levinson, E., "The MIME Multipart/Related Content-type", RFC 2387, DOI 10.17487/RFC2387, August 1998, . [RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322, DOI 10.17487/RFC5322, October 2008, . [RFC7285] Alimi, R., Ed., Penno, R., Ed., Yang, Y., Ed., Kiesel, S., Previdi, S., Roome, W., Shalunov, S., and R. Woundy, "Application-Layer Traffic Optimization (ALTO) Protocol", RFC 7285, DOI 10.17487/RFC7285, September 2014, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8189] Randriamasy, S., Roome, W., and N. Schwan, "Multi-Cost Application-Layer Traffic Optimization (ALTO)", RFC 8189, DOI 10.17487/RFC8189, October 2017, . [RFC8895] Roome, W. and Y. Yang, "Application-Layer Traffic Optimization (ALTO) Incremental Updates Using Server-Sent Events (SSE)", RFC 8895, DOI 10.17487/RFC8895, November 2020, . [RFC8896] Randriamasy, S., Yang, R., Wu, Q., Deng, L., and N. Schwan, "Application-Layer Traffic Optimization (ALTO) Cost Calendar", RFC 8896, DOI 10.17487/RFC8896, November 2020, . 13.2. Informative References [BONDY] Bondy, J.A. and R.L. Hemminger, "Graph reconstruction—a survey", Journal of Graph Theory, Volume 1, Issue 3, pp 227-268 , 1977, . [BOXOPT] Xiang, Q., Yu, H., Aspnes, J., Le, F., Kong, L., and Y.R. Yang, "Optimizing in the dark: Learning an optimal solution through a simple request interface", Proceedings of the AAAI Conference on Artificial Intelligence 33, 1674-1681 , 2019, . Gao, et al. Expires 21 September 2022 [Page 61] Internet-Draft ALTO-PV March 2022 [CLARINET] Viswanathan, R., Ananthanarayanan, G., and A. Akella, "CLARINET: WAN-Aware Optimization for Analytics Queries", In 12th USENIX Symposium on Operating Systems Design and Implementation (OSDI 16), USENIX Association, Savannah, GA, 435-450 , 2016, . [G2] Ros-Giralt, J., Bohara, A., Yellamraju, S., Langston, M.H., Lethin, R., Jiang, Y., Tassiulas, L., Li, J., Tan, Y., and M. Veeraraghavan, "On the Bottleneck Structure of Congestion-Controlled Networks", Proceedings of the ACM on Measurement and Analysis of Computing Systems, Volume 3, Issue 3, pp 1-31 , 2019, . [HUG] Chowdhury, M., Liu, Z., Ghodsi, A., and I. Stoica, "HUG: Multi-Resource Fairness for Correlated and Elastic Demands", 13th USENIX Symposium on Networked Systems Design and Implementation (NSDI 16) (Santa Clara, CA, 2016), 407-424. , 2016, . [I-D.ietf-alto-performance-metrics] Wu, Q., Yang, Y. R., Lee, Y., Dhody, D., Randriamasy, S., and L. M. C. Murillo, "ALTO Performance Cost Metrics", Work in Progress, Internet-Draft, draft-ietf-alto- performance-metrics-26, 2 March 2022, . [I-D.ietf-httpbis-http2bis] Thomson, M. and C. Benfield, "HTTP/2", Work in Progress, Internet-Draft, draft-ietf-httpbis-http2bis-07, 24 January 2022, . [I-D.ietf-quic-http] Bishop, M., "Hypertext Transfer Protocol Version 3 (HTTP/3)", Work in Progress, Internet-Draft, draft-ietf- quic-http-34, 2 February 2021, . [JSONiq] "The JSON Query language", 2020, . Gao, et al. Expires 21 September 2022 [Page 62] Internet-Draft ALTO-PV March 2022 [MERCATOR] Xiang, Q., Zhang, J., Wang, X., Liu, Y., Guok, C., Le, F., MacAuley, J., Newman, H., and Y.R. Yang, "Toward Fine- Grained, Privacy-Preserving, Efficient Multi-Domain Network Resource Discovery", IEEE/ACM IEEE Journal on Selected Areas of Communication 37(8): 1924-1940, 2019, . [MOWIE] Zhang, Y., Li, G., Xiong, C., Lei, Y., Huang, W., Han, Y., Walid, A., Yang, Y.R., and Z. Zhang, "MoWIE: Toward Systematic, Adaptive Network Information Exposure as an Enabling Technique for Cloud-Based Applications over 5G and Beyond", In Proceedings of the Workshop on Network Application Integration/CoDesign, ACM, Virtual Event USA, 20-27. , 2020, . [NOVA] Gao, K., Xiang, Q., Wang, X., Yang, Y.R., and J. Bi, "An objective-driven on-demand network abstraction for adaptive applications", IEEE/ACM Transactions on Networking (TON) Vol 27, no. 2 (2019): 805-818., 2019, . [RESA] Xiang, Q., Zhang, J., Wang, X., Liu, Y., Guok, C., Le, F., MacAuley, J., Newman, H., and Y.R. Yang, "Fine-grained, multi-domain network resource abstraction as a fundamental primitive to enable high-performance, collaborative data sciences", Proceedings of the Super Computing 2018, 5:1-5:13 , 2019, . [RFC2216] Shenker, S. and J. Wroclawski, "Network Element Service Specification Template", RFC 2216, DOI 10.17487/RFC2216, September 1997, . [RFC4271] Rekhter, Y., Ed., Li, T., Ed., and S. Hares, Ed., "A Border Gateway Protocol 4 (BGP-4)", RFC 4271, DOI 10.17487/RFC4271, January 2006, . [SENSE] "Software Defined Networking (SDN) for End-to-End Networked Science at the Exascale", 2019, . [SEREDGE] Contreras, L., Baliosian, J., Martı́nez-Julia, P., and J. Serrat, "Computing at the Edge: But, what Edge?", In proceedings of the NOMS 2020 - 2020 IEEE/IFIP Network Operations and Management Symposium. pp. 1-9. , 2020, . Gao, et al. Expires 21 September 2022 [Page 63] Internet-Draft ALTO-PV March 2022 [SWAN] Hong, C., Kandula, S., Mahajan, R., Zhang, M., Gill, V., Nanduri, M., and R. Wattenhofer, "Achieving High Utilization with Software-driven WAN", In Proceedings of the ACM SIGCOMM 2013 Conference on SIGCOMM (SIGCOMM '13), ACM, New York, NY, USA, 15-26. , 2013, . [UNICORN] Xiang, Q., Chen, S., Gao, K., Newman, H., Taylor, I., Zhang, J., and Y.R. Yang, "Unicorn: Unified Resource Orchestration for Multi-Domain, Geo-Distributed Data Analytics", 2017 IEEE SmartWorld, Ubiquitous Intelligence Computing, Advanced Trusted Computed, Scalable Computing Communications, Cloud Big Data Computing, Internet of People and Smart City Innovation (SmartWorld/SCALCOM/UIC/ATC/CBDCom/IOP/SCI) (Aug. 2017), 1-6. , 2017, . [XQuery] "XQuery 3.1: An XML Query Language", 2017, . Appendix A. Acknowledgments The authors would like to thank discussions with Andreas Voellmy, Erran Li, Haibin Song, Haizhou Du, Jiayuan Hu, Qiao Xiang, Tianyuan Liu, Xiao Shi, Xin Wang, and Yan Luo. The authors thank Greg Bernstein, Dawn Chen, Wendy Roome, and Michael Scharf for their contributions to earlier drafts. The authors would also like to thank Tim Chown, Luis Contreras, Roman Danyliw, Benjamin Kaduk, Erik Kline, Suresh Krishnan, Murray Kucherawy, Warren Kumari, Danny Lachos, Francesca Palombini, Eric Vyncke, Samuel Weiler, and Qiao Xiang whose feedback and suggestions are invaluable to improve the practicability and conciseness of this document, and Mohamed Boucadair, Martin Duke, Vijay Gurbani, Jan Seedorf, and Qin Wu who provide great support and guidance. Appendix B. Revision Logs (To be removed before publication) B.1. Changes since -20 Reivision -21 * changes the normative requirement on protecting confidentiality of PV information with softer language Gao, et al. Expires 21 September 2022 [Page 64] Internet-Draft ALTO-PV March 2022 B.2. Changes since -19 Revision -20 * changes the IANA registry information * adopts the comments from IESG reviews B.3. Changes since -18 Revision -19 * adds detailed examples for use cases * clarify terms with ambiguous meanings B.4. Changes since -17 Revision -18 * changes the specification for content-id to conform to [RFC2387] and [RFC5322] * adds IPv6 examples B.5. Changes since -16 Revision -17 * adds items for media type of defining resources in IANA considerations B.6. Changes since -15 Revision -16 * resolves the compatibility with the Multi-Cost extension (RFC 8189) * adds media types of defining resources for ANE property types (for IANA registration) B.7. Changes since -14 Revision -15 * fixes the IDNits warnings, Gao, et al. Expires 21 September 2022 [Page 65] Internet-Draft ALTO-PV March 2022 * fixes grammar issues, * addresses the comments in the AD review. B.8. Changes since -13 Revision -14 * addresses the comments in the chair review, * fixes most issues raised by IDNits. B.9. Changes since -12 Revision -13 * changes the abstract based on the chairs' reviews * integrates Richard's responds to WGLC reviews B.10. Changes since -11 Revision -12 * clarifies the definition of ANEs in a similar way as how Network Elements is defined in [RFC2216] * restructures several paragraphs that are not clear (Sec 3, Path Vector bullet, Sec 4.2, Sec 5.1.3, Sec 6.2.4, Sec 6.4.2, Sec 9.3) * uses "ALTO Entity Domain Type Registry" B.11. Changes since -10 Revision -11 * replaces "part" with "components" in the abstract; * identifies additional requirements (AR) derived from the flow scheduling example, and introduces how the extension addresses the additional requirements * fixes the inconsistent use of "start" parameter in multipart responses; * specifies explicitly how to handle "cost-constraints"; Gao, et al. Expires 21 September 2022 [Page 66] Internet-Draft ALTO-PV March 2022 * uses the latest IANA registration mechanism defined in [I-D.ietf-alto-unified-props-new]; * renames "persistent-entities" to "persistent-entity-id"; * makes "application/alto-propmap+json" as the media type of defining resources for the "ane" domain; * updates the examples; * adds the discussion on ephemeral and persistent ANEs. B.12. Changes since -09 Revision -10 * revises the introduction which - extends the scope where the PV extension can be applied beyond the "path correlation" information * brings back the capacity region use case to better illustrate the problem * revises the overview to explain and defend the concepts and decision choices * fixes inconsistent terms, typos B.13. Changes since -08 This revision * fixes a few spelling errors * emphasizes that abstract network elements can be generated on demand in both introduction and motivating use cases B.14. Changes Since Version -06 * We emphasize the importance of the path vector extension in two aspects: 1. It expands the problem space that can be solved by ALTO, from preferences of network paths to correlations of network paths. 2. It is motivated by new usage scenarios from both application's and network's perspectives. Gao, et al. Expires 21 September 2022 [Page 67] Internet-Draft ALTO-PV March 2022 * More use cases are included, in addition to the original capacity region use case. * We add more discussions to fully explore the design space of the path vector extension and justify our design decisions, including the concept of abstract network element, cost type (reverted to -05), newer capabilities and the multipart message. * Fix the incremental update process to be compatible with SSE -16 draft, which uses client-id instead of resource-id to demultiplex updates. * Register an additional ANE property (i.e., persistent-entities) to cover all use cases mentioned in the draft. Authors' Addresses Kai Gao Sichuan University No.24 South Section 1, Yihuan Road Chengdu 610000 China Email: kaigao@scu.edu.cn Young Lee Samsung South Korea Email: younglee.tx@gmail.com Sabine Randriamasy Nokia Bell Labs Route de Villejust 91460 Nozay France Email: sabine.randriamasy@nokia-bell-labs.com Yang Richard Yang Yale University 51 Prospect Street New Haven, CT United States of America Email: yry@cs.yale.edu Gao, et al. Expires 21 September 2022 [Page 68] Internet-Draft ALTO-PV March 2022 Jingxuan Jensen Zhang Tongji University 4800 Caoan Road Shanghai 201804 China Email: jingxuan.n.zhang@gmail.com Gao, et al. Expires 21 September 2022 [Page 69]