Network Working Group C. Kalt Request for Comments: 2810 April 2000 Updates: 1459 Category: Informational Internet Relay Chat: Architecture Status of this Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited. Copyright Notice Copyright (C) The Internet Society (2000). All Rights Reserved. Abstract The IRC (Internet Relay Chat) protocol is for use with text based conferencing. It has been developed since 1989 when it was originally implemented as a mean for users on a BBS to chat amongst themselves. First formally documented in May 1993 by RFC 1459 [IRC], the protocol has kept evolving. This document is an update describing the architecture of the current IRC protocol and the role of its different components. Other documents describe in detail the protocol used between the various components defined here. Table of Contents 1. Introduction ............................................... 2 2. Components ................................................. 2 2.1 Servers ................................................ 2 2.2 Clients ................................................ 3 2.2.1 User Clients ...................................... 3 2.2.2 Service Clients ................................... 3 3. Architecture ............................................... 3 4. IRC Protocol Services ...................................... 4 4.1 Client Locator ......................................... 4 4.2 Message Relaying ....................................... 4 4.3 Channel Hosting And Management ......................... 4 5. IRC Concepts ............................................... 4 5.1 One-To-One Communication ............................... 5 5.2 One-To-Many ............................................ 5 5.2.1 To A Channel ...................................... 5 5.2.2 To A Host/Server Mask ............................. 6 Kalt Informational [Page 1]
RFC 2810 Internet Relay Chat: Architecture April 2000 5.2.3 To A List ......................................... 6 5.3 One-To-All ............................................. 6 5.3.1 Client-to-Client .................................. 6 5.3.2 Client-to-Server .................................. 7 5.3.3 Server-to-Server .................................. 7 6. Current Problems ........................................... 7 6.1 Scalability ............................................ 7 6.2 Reliability ............................................ 7 6.3 Network Congestion ..................................... 7 6.4 Privacy ................................................ 8 7. Security Considerations .................................... 8 8. Current Support And Availability ........................... 8 9. Acknowledgements ........................................... 8 10. References ................................................ 8 11. Author's Address .......................................... 9 12. Full Copyright Statement .................................. 10 1. Introduction The IRC (Internet Relay Chat) protocol has been designed over a number of years for use with text based conferencing. This document describes its current architecture. The IRC Protocol is based on the client-server model, and is well suited to running on many machines in a distributed fashion. A typical setup involves a single process (the server) forming a central point for clients (or other servers) to connect to, performing the required message delivery/multiplexing and other functions. This distributed model, which requires each server to have a copy of the global state information, is still the most flagrant problem of the protocol as it is a serious handicap, which limits the maximum size a network can reach. If the existing networks have been able to keep growing at an incredible pace, we must thank hardware manufacturers for giving us ever more powerful systems. 2. Components The following paragraphs define the basic components of the IRC protocol. 2.1 Servers The server forms the backbone of IRC as it is the only component of the protocol which is able to link all the other components together: it provides a point to which clients may connect to talk to Kalt Informational [Page 2]
RFC 2810 Internet Relay Chat: Architecture April 2000 each other [IRC-CLIENT], and a point for other servers to connect to [IRC-SERVER]. The server is also responsible for providing the basic services defined by the IRC protocol. 2.2 Clients A client is anything connecting to a server that is not another server. There are two types of clients which both serve a different purpose. 2.2.1 User Clients User clients are generally programs providing a text based interface that is used to communicate interactively via IRC. This particular type of clients is often referred as "users". 2.2.2 Service Clients Unlike users, service clients are not intended to be used manually nor for talking. They have a more limited access to the chat functions of the protocol, while optionally having access to more private data from the servers. Services are typically automatons used to provide some kind of service (not necessarily related to IRC itself) to users. An example is a service collecting statistics about the origin of users connected on the IRC network. 3. Architecture An IRC network is defined by a group of servers connected to each other. A single server forms the simplest IRC network. The only network configuration allowed for IRC servers is that of a spanning tree where each server acts as a central node for the rest of the network it sees. 1--\ A D---4 2--/ \ / B----C / \ 3 E Servers: A, B, C, D, E Clients: 1, 2, 3, 4 [ Fig. 1. Sample small IRC network ] Kalt Informational [Page 3]
RFC 2810 Internet Relay Chat: Architecture April 2000 The IRC protocol provides no mean for two clients to directly communicate. All communication between clients is relayed by the server(s). 4. IRC Protocol Services This section describes the services offered by the IRC protocol. The combination of these services allow real-time conferencing. 4.1 Client Locator To be able to exchange messages, two clients must be able to locate each other. Upon connecting to a server, a client registers using a label which is then used by other servers and clients to know where the client is located. Servers are responsible for keeping track of all the labels being used. 4.2 Message Relaying The IRC protocol provides no mean for two clients to directly communicate. All communication between clients is relayed by the server(s). 4.3 Channel Hosting And Management A channel is a named group of one or more users which will all receive messages addressed to that channel. A channel is characterized by its name and current members, it also has a set of properties which can be manipulated by (some of) its members. Channels provide a mean for a message to be sent to several clients. Servers host channels, providing the necessary message multiplexing. Servers are also responsible for managing channels by keeping track of the channel members. The exact role of servers is defined in "Internet Relay Chat: Channel Management" [IRC-CHAN]. 5. IRC Concepts This section is devoted to describing the actual concepts behind the organization of the IRC protocol and how different classes of messages are delivered. Kalt Informational [Page 4]
RFC 2810 Internet Relay Chat: Architecture April 2000 5.1 One-To-One Communication Communication on a one-to-one basis is usually performed by clients, since most server-server traffic is not a result of servers talking only to each other. To provide a means for clients to talk to each other, it is REQUIRED that all servers be able to send a message in exactly one direction along the spanning tree in order to reach any client. Thus the path of a message being delivered is the shortest path between any two points on the spanning tree. The following examples all refer to Figure 1 above. Example 1: A message between clients 1 and 2 is only seen by server A, which sends it straight to client 2. Example 2: A message between clients 1 and 3 is seen by servers A & B, and client 3. No other clients or servers are allowed see the message. Example 3: A message between clients 2 and 4 is seen by servers A, B, C & D and client 4 only. 5.2 One-To-Many The main goal of IRC is to provide a forum which allows easy and efficient conferencing (one to many conversations). IRC offers several means to achieve this, each serving its own purpose. 5.2.1 To A Channel In IRC the channel has a role equivalent to that of the multicast group; their existence is dynamic and the actual conversation carried out on a channel MUST only be sent to servers which are supporting users on a given channel. Moreover, the message SHALL only be sent once to every local link as each server is responsible to fan the original message to ensure that it will reach all the recipients. The following examples all refer to Figure 2. Example 4: Any channel with 1 client in it. Messages to the channel go to the server and then nowhere else. Example 5: 2 clients in a channel. All messages traverse a path as if they were private messages between the two clients outside a channel. Kalt Informational [Page 5]
RFC 2810 Internet Relay Chat: Architecture April 2000 Example 6: Clients 1, 2 and 3 in a channel. All messages to the channel are sent to all clients and only those servers which must be traversed by the message if it were a private message to a single client. If client 1 sends a message, it goes back to client 2 and then via server B to client 3. 5.2.2 To A Host/Server Mask To provide with some mechanism to send messages to a large body of related users, host and server mask messages are available. These messages are sent to users whose host or server information match that of the mask. The messages are only sent to locations where users are, in a fashion similar to that of channels. 5.2.3 To A List The least efficient style of one-to-many conversation is through clients talking to a 'list' of targets (client, channel, mask). How this is done is almost self explanatory: the client gives a list of destinations to which the message is to be delivered and the server breaks it up and dispatches a separate copy of the message to each given destination. This is not as efficient as using a channel since the destination list MAY be broken up and the dispatch sent without checking to make sure duplicates aren't sent down each path. 5.3 One-To-All The one-to-all type of message is better described as a broadcast message, sent to all clients or servers or both. On a large network of users and servers, a single message can result in a lot of traffic being sent over the network in an effort to reach all of the desired destinations. For some class of messages, there is no option but to broadcast it to all servers so that the state information held by each server is consistent between servers. 5.3.1 Client-to-Client There is no class of message which, from a single message, results in a message being sent to every other client. Kalt Informational [Page 6]
RFC 2810 Internet Relay Chat: Architecture April 2000 5.3.2 Client-to-Server Most of the commands which result in a change of state information (such as channel membership, channel mode, user status, etc.) MUST be sent to all servers by default, and this distribution SHALL NOT be changed by the client. 5.3.3 Server-to-Server While most messages between servers are distributed to all 'other' servers, this is only required for any message that affects a user, channel or server. Since these are the basic items found in IRC, nearly all messages originating from a server are broadcast to all other connected servers. 6. Current Problems There are a number of recognized problems with this protocol, this section only addresses the problems related to the architecture of the protocol. 6.1 Scalability It is widely recognized that this protocol does not scale sufficiently well when used in a large arena. The main problem comes from the requirement that all servers know about all other servers, clients and channels and that information regarding them be updated as soon as it changes. 6.2 Reliability As the only network configuration allowed for IRC servers is that of a spanning tree, each link between two servers is an obvious and quite serious point of failure. This particular issue is addressed more in detail in "Internet Relay Chat: Server Protocol" [IRC- SERVER]. 6.3 Network Congestion Another problem related to the scalability and reliability issues, as well as the spanning tree architecture, is that the protocol and architecture for IRC are extremely vulnerable to network congestions. This problem is endemic, and should be solved for the next generation: if congestion and high traffic volume cause a link between two servers to fail, not only this failure generates more network traffic, but the reconnection (eventually elsewhere) of two servers also generates more traffic. Kalt Informational [Page 7]
RFC 2810 Internet Relay Chat: Architecture April 2000 In an attempt to minimize the impact of these problems, it is strongly RECOMMENDED that servers do not automatically try to reconnect too fast, in order to avoid aggravating the situation. 6.4 Privacy Besides not scaling well, the fact that servers need to know all information about other entities, the issue of privacy is also a concern. This is in particular true for channels, as the related information is quite a lot more revealing than whether a user is online or not. 7. Security Considerations Asides from the privacy concerns mentioned in section 6.4 (Privacy), security is believed to be irrelevant to this document. 8. Current Support And Availability Mailing lists for IRC related discussion: General discussion: ircd-users@irc.org Protocol development: ircd-dev@irc.org Software implementations: ftp://ftp.irc.org/irc/server ftp://ftp.funet.fi/pub/unix/irc ftp://coombs.anu.edu.au/pub/irc Newsgroup: alt.irc 9. Acknowledgements Parts of this document were copied from the RFC 1459 [IRC] which first formally documented the IRC Protocol. It has also benefited from many rounds of review and comments. In particular, the following people have made significant contributions to this document: Matthew Green, Michael Neumayer, Volker Paulsen, Kurt Roeckx, Vesa Ruokonen, Magnus Tjernstrom, Stefan Zehl. Kalt Informational [Page 8]
RFC 2810 Internet Relay Chat: Architecture April 2000 10. References [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [IRC] Oikarinen, J. and D. Reed, "Internet Relay Chat Protocol", RFC 1459, May 1993. [IRC-CLIENT] Kalt, C., "Internet Relay Chat: Client Protocol", RFC 2812, April 2000. [IRC-SERVER] Kalt, C., "Internet Relay Chat: Server Protocol", RFC 2813, April 2000. [IRC-CHAN] Kalt, C., "Internet Relay Chat: Channel Management", RFC 2811, April 2000. 11. Author's Address Christophe Kalt 99 Teaneck Rd, Apt #117 Ridgefield Park, NJ 07660 USA EMail: kalt@stealth.net Kalt Informational [Page 9]
RFC 2810 Internet Relay Chat: Architecture April 2000 12. Full Copyright Statement Copyright (C) The Internet Society (2000). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. Kalt Informational [Page 10]